Lettura libera · account gratuito per contribuireErede di Anticars (2000)

Porsche 944

1982–1991 · 1 generazioni · 2 difetti documentati · 2 mercati
Generazioni
Tutte le generazioni9441982–19912158
Anno modello
MercatoTuttiJPNA
RichiamoCriticoAltroJP

その他(その他)

音響機器のオーディオ本体(メーカー:ソニー(株)、型式:XR-5H911,XRー5H912)の配 線基板において、当該基板の製造工程が不適切なため、コンデンサーが損傷しているもの があり、そのままの状態で使用を続けると、当該コンデンサーの端子間が短絡して、スピ ーカーに過大な電流が流れ発熱し、最悪の場合、火災に至るおそれがある。

MLIT · Giappone7 dic 19991207700Anni modello 1990–1991Mostrato in giapponese originale · traduzione in attesaVedi dettagli →
RichiamoCriticoElettronicaJP

その他(その他)

音響機器のオーディオ本体の配線基盤において、当該基盤の製造工程が不適切なため、コ ンデンサが損傷しているものがあり、そのままの状態で使用を続けると、当該コンデンサ の端子間が短絡して、スピーカーに過大な電流が流れ、最悪の場合、火災にいたるおそれ がある。

MLIT · Giappone19 dic 19971206650Anni modello 1990–1992Mostrato in giapponese originale · traduzione in attesaVedi dettagli →
RichiamoCriticoMotoreNA

Fuel System

The short section of high pressure fuel hose between the fuel rail and the fuel pressure regulator, which runs alongside the intake manifold, may be subject to hardening. In the event that this line does harden, fuel leaks could develop between the hose and metal pipe fittings. Leaking fuel could ignite on the hot exhaust system and lead to an engine compartment fire. Correction: Fuel hose will be replaced on 924s, 944 and 944 turbo vehicles and the fuel hose and fuel rail will be replaced on 944s vehicles.

Transport Canada4 apr 19901990051Anni modello 1985–1988Mostrato in inglese originale · traduzione in attesaVedi dettagli →
RichiamoCriticoMotoreNA

Fuel system, gasoline:Fuel injection system:Fuel rail

The hose material used in the short section of the high pressure fuel line hose, between the fuel rail and fuel pressure regulator, is subject to hardening, and could cause fuel leaks between the hose and the metal pipe fittings.

NHTSA · Stati Uniti2 apr 199090V061000Anni modello 1985–1988Mostrato in inglese originale · traduzione in attesaVedi dettagli →
RichiamoCriticoMotoreNA

Fuel system, gasoline:Delivery:Hoses, lines/piping, and fittings

The protective sleeve covering of the return fuel hose between the pressure regulator and fuel return pipe was shortened leaving part of the hose exposed. In some instances this part of the hose becomes kinked due to the engine compartment heat and/or the routing of the hose. Consequence of defect: If this occurs it could restrict and damage the return fuel hose which could lead to fuel leakage and cause an engine compartment fire.

NHTSA · Stati Uniti12 giu 198686V077000Anni modello 1986Mostrato in inglese originale · traduzione in attesaVedi dettagli →
RichiamoCriticoMotoreNA

Fuel system, gasoline:Delivery:Hoses, lines/piping, and fittings

Fuel hose may be damaged due to too much pressure in crimping the hose end fitting. Consequence of defect: A fuel leak could develop which could cause a loss in system pressure and engine stalling. Also, fuel vapors in the engine compartment could be ignited by a spark and cause a fire.

NHTSA · Stati Uniti9 apr 198585V039000Anni modello 1985Mostrato in inglese originale · traduzione in attesaVedi dettagli →
RichiamoModeratoCarrozzeriaJP

ワイパー

左ハンドル車において、前面ガラス用窓拭器のモーター上部に取り付けられているカバ ーの形状が小さいため、当該モーター内部に水が入り、このままの状態で使用を続けると 、最悪の場合、窓拭器が作動不能になるおそれがある。

MLIT · Giappone17 nov 19941205370Anni modello 1990–1991Mostrato in giapponese originale · traduzione in attesaVedi dettagli →
RichiamoModeratoCarrozzeriaNA

Visibility:Windshield wiper/washer:Motor

The plastic cowl cover was not sealed to the body at the base of the windshield. Water can leak and reach the windshield wiper motor, causing internal corrosion and failure of the wiper motor.

NHTSA · Stati Uniti6 mag 199494V088000Anni modello 1991Mostrato in inglese originale · traduzione in attesaVedi dettagli →
RichiamoModeratoSospensioniNA

Suspension

Front tracking control arms on these vehicles bearing the identification code "sm" could crack and eventually break. The breakage of the front tracking control arm while driving may result in loss of control and a vehicle crash without prior warning. Correction: Vehicles will be inspected and front tracking control arms with the "sm" identification code will be replaced.

Transport Canada14 ago 19891989113Anni modello 1988Mostrato in inglese originale · traduzione in attesaVedi dettagli →
RichiamoModeratoSospensioniNA

Suspension:Front:Control arm:Lower arm

The alloy a-arms may have a manufacturing casting defect and could crack and break after mileage accumulation.

NHTSA · Stati Uniti10 ago 198989V133000Anni modello 1988Mostrato in inglese originale · traduzione in attesaVedi dettagli →
RichiamoModeratoSospensioniNA

Richiamo

The rear spring plates (radius arms) on these vehicles may have been improperly tempered by supplier. Improperly hardened spring plates could crack and possibly break . This could affect lateral guidance of the corresponding rear wheel resulting in loss of vehicle control.

Transport Canada9 ott 19851985110Anni modello 1983Mostrato in inglese originale · traduzione in attesaVedi dettagli →
RichiamoModeratoSospensioniNA

Suspension:Rear:Springs:Leaf spring assembly

Rear spring plates may not have been tempered and are not of the proper hardness value. Consequence of defect: The plates could crack and/or break, affect lateral guidance of the rear wheel, and result in loss of control of the car which may cause an accident.

NHTSA · Stati Uniti26 lug 198585V095000Anni modello 1983Mostrato in inglese originale · traduzione in attesaVedi dettagli →
RichiamoModeratoMotoreNA

Richiamo

The fuel supply hose to the pressure damper in the engine compartment may develop a leak between the flex hose and the threaded connector due to improper crimping of the fitting. This will cause the fuel pressure in the injection system to drop, resulting in engine stalling. A stalled vehicle could pose a threat to traffic safety.

Transport Canada12 apr 19851985040Anni modello 1985Mostrato in inglese originale · traduzione in attesaVedi dettagli →
RichiamoModeratoCarrozzeriaNA

Vehicle speed control:Linkages

Metal bushings for the cruise control linkage are subject to corrosion due to weather conditions. Also, there is not enough clearance between the bushings and the shaft; and the linkage points were not lubricated. Thus, cruise control linkage can bind, causing the accelerator pedal to stick in a depressed position. Consequence of defect: The vehicle, without warning, would continue at set speed and can't be reduced. This could result in loss of control and an accident.

NHTSA · Stati Uniti1 mar 198585V023000Anni modello 1984–1985Mostrato in inglese originale · traduzione in attesaVedi dettagli →
RichiamoModeratoAbitacoloNA

Seat belts:Front:Retractor

The rear seat belts do not include emergency-locking or automatic-locking retractors. The belts do not comply with federal motor vehicle safety standard no. 208, "occupant crash protection".

NHTSA · Stati Uniti26 ott 198383V111000Anni modello 1983–1984Mostrato in inglese originale · traduzione in attesaVedi dettagli →

Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).