La densità del propellente nel gonfiatore dell'airbag può ridursi a causa dei cicli ad alta temperatura e dell'umidità presenti nel propellente e nel suo contenitore sigillato. In caso di incidente, ciò può causare il rilascio di frammenti dell'airbag anteriore dall'alloggiamento del generatore, aumentando così il rischio di lesioni.
The density of the propellant in the airbag inflator may be reduced due to high temperature cycling and moisture in the propellant and its sealed container. In the event of an accident this can lead to the release of fragments of the front airbag from the generator housing, increasing the risk of injury.
Safety Gate · UE21 dic 2022A12/01861/22Anni modello 2002–2006Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Due to insufficient durability, the Exhaust Gas Recirculation (EGR) cooler may develop an internal coolant leak which could create smouldering deposits inside the EGR cooler and the intake manifold.This may result in localised thermal damage in the intake system, which might lead to engine power reduction and to increased risk of fire.
Safety Gate · UE30 mar 2021A12/00444/21Anni modello 2015–2018Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Il generatore di gas dell'airbag lato passeggero potrebbe essere difettoso. Ciò potrebbe causare un gonfiaggio incontrollato e il rilascio di frammenti metallici quando l'airbag viene attivato, provocando lesioni agli occupanti.
Safety Gate · UE4 mar 2020A12/00376/20Anni modello 2001–2014Tradotto automaticamente · originale: ingleseVedi dettagli →
Il propellente a base di nitrato d'ammonio utilizzato nel gonfiatore dell'airbag può degradarsi nel tempo a causa della degradazione del propellente, che si verifica dopo un'esposizione prolungata a un'elevata umidità assoluta, alte temperature e cicli di temperatura elevata. In caso di attivazione dell'airbag, l'eccessiva pressione interna può provocare la rottura del corpo del gonfiatore e frammenti metallici possono attraversare il materiale del cuscino, causando lesioni agli occupanti.
Safety Gate · UE3 set 2019A12/1334/19Anni modello 2001–2011Tradotto automaticamente · originale: ingleseVedi dettagli →
The ammonium nitrate propellant used in the air bag inflator may degrade over time due to heat cycles and exposure to moisture. In the event of the airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the rider.
Safety Gate · UE13 nov 2018A12/1740/18Anni modello 2001–2006Mostrato in inglese originale · traduzione in attesaVedi dettagli →
The airbag control module for the supplemental restraint system (SRS ECU) has been assembled with application-specific integrated circuits (ASICs) that are susceptible to internal shorting when exposed to high inductive electrical noise from various vehicle electrical components. If this occurs, there is a possibility that the ASIC could become damaged, leading to the airbag(s) and/or seat belt pretensioners being deactivated or deploying inadvertently.
Safety Gate · UE13 nov 2018A12/1739/18Anni modello 2002–2006Mostrato in inglese originale · traduzione in attesaVedi dettagli →
The subject vehicles are equipped with front passenger airbag inflators which could have been assembled with improperly manufactured propellant wafers. Improperly manufactured propellant wafers could cause the inflator to rupture and the front passenger airbag to deploy abnormally in a crash. This could result in increased risk of injury to the occupant and the possibility of a fire.
DVSA · Regno Unito15 giu 2015R/2015/096Anni modello 2003–2007Mostrato in inglese originale · traduzione in attesaVedi dettagli →
The subject vehicles are equipped with front passenger airbag inflators which could have been assembled with improperly manufactured propellant wafers. Improperly manufactured propellant wafers could cause the inflator to rupture and the front passenger airbag to deploy abnormally in a crash. This could result in increased risk of injury to the occupant and the possibility of a fire.
DVSA · Regno Unito17 apr 2013R/2013/048Anni modello 2001–2003Mostrato in inglese originale · traduzione in attesaVedi dettagli →
It is possible that the splines of the extension shaft on vehicles equipped with Electric Motor assisted Power Steering (EMPS) may not have received the correct hardness treatment. This can cause the spline to distort and wear and eventually result in loss of steering.
DVSA · Regno Unito3 dic 2012R/2012/145Anni modello 2002–2008Mostrato in inglese originale · traduzione in attesaVedi dettagli →
It is possible that during the manufacturing process the wall thickness of the high pressure supply pipe may have been reduced. If the driving conditions of the vehicle cause fuel pressure fluctuations this could cause cracking and result in a fuel leak. Also due to gasket fatigue and prolonged usage the high pressure fuel pump check valve may be come loose and leak.
DVSA · Regno Unito17 feb 2011R/2011/005Anni modello 2000–2008Mostrato in inglese originale · traduzione in attesaVedi dettagli →
The crimping connector of the inflator cartridge may be incorrectly assembled with the curtain airbag on certain vehicles. In the event of airbag activation full deployment of the curtain shield cannot be guaranteed due to this condition.
DVSA · Regno Unito26 ago 2003R/2003/125Anni modello 2003Mostrato in inglese originale · traduzione in attesaVedi dettagli →
There is a possibility that excessive residual stress remains on the check valve of the fuel pump during the assembly process. If the vehicle is driven with the residual stress the check valve may leak fuel.
DVSA · Regno Unito11 lug 2002R/2002/099Anni modello 2000–2001Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Il propellente a base di nitrato d'ammonio utilizzato nel gonfiatore dell'airbag può degradarsi nel tempo a causa dei cicli termici e dell'esposizione all'umidità.
Het aanwezige drijfgas in de airbagontsteker aan de bestuurderszijde kan in de loop van de tijd, door luchtvochtigheid en temperatuurwisselingen, afnemen in dichtheid en poederachtig worden.
rdw9 dic 2022MGP220467Anni modello 2003–2006Mostrato in olandese originale · traduzione in attesaVedi dettagli →
Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).