技術通報
本技術情報は、電動駆動システムの警告灯が点灯した場合の情報を提供するものです。DTC P0A2B00 (41505)
🔔 無料アカウントを作成して Audi Q4 e-tron (すべての世代) のメール通知を受け取る
技術サービス通報(TSB)は、既知の不具合についてメーカーが販売店に送る修理指示です。安全リコールではありませんが、不具合の裏付けになることがよくあります。
本技術情報は、電動駆動システムの警告灯が点灯した場合の情報を提供するものです。DTC P0A2B00 (41505)
This bulletin provides informaiton when there is an electrical drive system warning lamp; DTC P0A2B00 (41505).
Certain high-voltage (HV) battery cell modules may have an internal connection used to monitor battery voltage that may not have been adequately welded due to a manufacturing issue. If this condition is present, the battery monitoring system may display incorrect readings. Owners may notice a yellow or red warning light, along with related error messages being displayed on the instrument panel. To correct this, the affected HV battery cell module(s) will be replaced.
Certain high-voltage (HV) battery cell modules may have an internal connection used to monitor battery voltage that may not have been adequately welded due to a manufacturing issue. If this condition is present, the battery monitoring system may display incorrect readings. Owners may notice a yellow or red warning light, along with related error messages being displayed on the instrument panel. To correct this, the affected HV battery cell module(s) will be replaced.
This bulletin provides information when the yellow electrical system warning lamp is illuminated; DTC B1581F4, B168A00.
This bulletin provides information when the yellow electrical system warning lamp I sillumiated; B1581F4, B168A00.
This bulletin provides information when the exhaust warning light is illuminated; engine starter relay test plan DTC P000000.
本技術情報は、MMIで充電目標値を調整できない場合の情報を提供するものです。
この技術速報は、MMIで充電目標値を調整できない場合の情報を提供します。
This Pending Service Solution (PSS) requests that technicians enter a record into the PSS databse when charging targets cannot be djusted via Audi connect.
This Pending Service Solution (PSS) requests that technicians enter a record into the PSS databse when charging targets cannot be djusted via Audi connect.
This Pending Service Solution (PSS) requests that technicians enter a record into the PSS databse when charging targets cannot be djusted via Audi connect.
This bulletin provides informatio when the rear corner view cannot be activated via the MMI with the reversing camera.
This TSB provides instructions for the combined baseline updates, and software version management.
This bulletin provides ionformation before replacing the emergency call module J949.
This Pending Service Solution (PSS) requests that technicians create a record in the PSS databse when the rear view camera cannot be activated via the MMI.
This TSB provides instructions for the combined baseline updates, and software version management.
Audi is providing a software update to help improve the performance of the Onboard Charger with Integrated DC/DC-Converter (OCDC).
Audi is providing a software update to help improve the performance of the Onboard Charger with Integrated DC/DC-Converter (OCDC).
This is a notice for software changes with the ODIS diagnostic program to correct the communication during vehicle programming function: The hotfix is to correct an issue with the battery adaptation test plan.
This bulletin provides information when "Electrical system fault" is displayed in the instrument cluster, DTC: P18F100, P0A1B00, U140500.
This is a notice for software changes with the ODIS diagnostic program to correct the communication during vehicle programming function: This hotfix is for the08 A/C heater electronics / Climatronic control module replacement test says it could not complete the VKMS adaptation. VKMS (Vehicle Key Management System) adaptation test also fails.
This is a notice for software changes with the ODIS diagnostic program to correct the communication during vehicle programming function: This hotfix is for the08 A/C heater electronics / Climatronic control module replacement test says it could not complete the VKMS adaptation. VKMS (Vehicle Key Management System) adaptation test also fails.
This bulletin provides information when there are ghost DTC entries in charging unit for high-voltage battery control unit, 00C6, On Car DC Charger.
This is a notice for software changes with the ODIS diagnostic program to correct the communication during vehicle programming function not displaying the correct mileage after running the activating coding portion of the test plan.
出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)、国土交通省(日本、公共データ利用規約1.0)、韓国国土交通部(car.go.kr)。