閲覧無料 · 投稿は無料アカウントでAnticars(2000年)の後継

BMW i3

2013–2026 · 2 世代 · 不具合9件 · 7市場
世代

技術サービス通報(TSB)は、既知の不具合についてメーカーが販売店に送る修理指示です。安全リコールではありませんが、不具合の裏付けになることがよくあります。

年式
i3 (2013) · 2013–2022
技術通報中程度電装NA

技術通報

Bmw: Convenience charging electronics (kle) had high voltage (hv) connectors installed improperly, causing a no charge or failure of intermittent charging. *pe

NHTSA · メーカー通報10057535モデルイヤー 2014原文(英語)で表示中 · 翻訳待ち詳細を見る →
i3 (2022) · 2018–2026
技術通報軽微電装NA

技術通報

テレマティクスモジュール(TCB2)がスリープモードに入ると、BMWデータサービスのリモートサービス(リモートエンジン始動、ロック/アンロック/空調調整)がTCB2を再有効化できません。この問題のため、駐車中およびロック中はリモートサービスが機能しません。

NHTSA · メーカー通報11035409モデルイヤー 2020自動翻訳 · 原文:英語詳細を見る →
i3 (2013) · 2013–2022
技術通報軽微電装NA

技術通報

The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle discharged battery complaints.

NHTSA · メーカー通報10249027モデルイヤー 2014原文(英語)で表示中 · 翻訳待ち詳細を見る →
i3 (2022) · 2018–2026
技術通報軽微電装NA

技術通報

DELIVERY STOP: CHARGING CABLE (NON-TURBOCORD VERSION): BMW AG has issued a Delivery Stop (effective May 3, 2021) on a small number of Model Year 2021 BMW i3 vehicles that were produced between March 1, 2021 and April 26, 2021. The vehicle cannot be charged on Level 1 because the Occasional Use Charging Cable (Standard OUC/Level 1/Mode 2), may have not been included.

NHTSA · メーカー通報10199300モデルイヤー 2021原文(英語)で表示中 · 翻訳待ち詳細を見る →
i3 (2013) · 2013–2022
技術通報軽微電装NA

技術通報

The vehicle may exhibit any of the following at very low State of Charge (SOC) ? less than 8%: - Power loss or high voltage system shutdown while running range extender (REx). - Inconsistent performance of the REx. - High voltage system shutdown in vehicles without REx. - Excessively high range displayed in instrument cluster.

NHTSA · メーカー通報10193496モデルイヤー 2014原文(英語)で表示中 · 翻訳待ち詳細を見る →
i3 (2013) · 2013–2022
技術通報軽微電装NA

技術通報

Shipping specific non-deployed vehicle safety devices to lighting resources, llc. This service Information bulletin provides information on shipping "specific" noin-deployed vehicle safety devices that are classified as Dangerous Goods (DG) to Lighting resources, LLC

NHTSA · メーカー通報10215025モデルイヤー 2017原文(英語)で表示中 · 翻訳待ち詳細を見る →
i3 (2013) · 2013–2022
技術通報軽微電装NA

技術通報

Covered under the terms of the BMW New Vehicle Limited Warranty for Passenger Cars and Light Trucks for

NHTSA · メーカー通報10215026モデルイヤー 2017原文(英語)で表示中 · 翻訳待ち詳細を見る →
i3 (2013) · 2013–2022
技術通報軽微電装NA

技術通報

Shipping specific non-deployed vehicle safety devices to lighting resources, LLC

NHTSA · メーカー通報10215031モデルイヤー 2017原文(英語)で表示中 · 翻訳待ち詳細を見る →
i3 (2013) · 2013–2022
技術通報軽微電装NA

技術通報

Displayed Range is Lower after Programming. After the vehicle is programmed with ISTA/P 3.53.3 (i-level I001-14-07-503), the displayed vehicle range in the instrument cluster is lower than prior to the software update. The actual range that the vehicle is capable of achieving on a full charge has not changed. The difference between the displayed range and actual range is always conservative, yet this difference varies based on driving profile. When driving primarily at highway speeds, the differnece between displayed and actual range is within a few percent of each other. When driving primarily with a low speed/city profile, the gap may widen to as much as 20% or more. In addition, the customer may notice that the vehicles range has decreased as outside temperatures have gotten colder. This is most noticeable in extreme cold climates, and when preconditioning is not used. This situation does not indicate a problem and is independent of the range display algorithm. CAUSE The algorithm that determines the displayed range, was changed with the 14-07-503 software level. The result of the changed algorithm is that the display is too conservative.

NHTSA · メーカー通報10148188モデルイヤー 2014原文(英語)で表示中 · 翻訳待ち詳細を見る →
i3 (2013) · 2013–2022
技術通報軽微電装NA

技術通報

After programming the displayed range appears to be lower prior to software update *cn

NHTSA · メーカー通報10058500モデルイヤー 2014原文(英語)で表示中 · 翻訳待ち詳細を見る →
i3 (2013) · 2013–2022
技術通報軽微電装NA

技術通報

Positive or negative terminal on cable connection can be moved which causes 12volt battery adapters to appear loose *cn

NHTSA · メーカー通報10058496モデルイヤー 2014原文(英語)で表示中 · 翻訳待ち詳細を見る →
i3 (2013) · 2013–2022
技術通報軽微電装NA

技術通報

Bmw: Some vehicles experience high voltage charging cable not able to disconnect and/or unlock, charging socket lights up white and fails to change colors and not able to charge via high voltage charging procedure. Model 2014 i3. *pe

NHTSA · メーカー通報10058477モデルイヤー 2014原文(英語)で表示中 · 翻訳待ち詳細を見る →
i3 (2013) · 2013–2022
技術通報軽微電装NA

技術通報

Bmw model i01( i3 and i3rex): Bulletin information replacing faulty convenience charging electronics (kle) could cause increased vehicle charging times. *lj

NHTSA · メーカー通報10058161モデルイヤー 2014原文(英語)で表示中 · 翻訳待ち詳細を見る →
i3 (2013) · 2013–2022
技術通報軽微電装NA

技術通報

Bmw i01(i3 and i3 rex) : Information regarding cause of high-voltage battery stop charging, in some cases the battery will not charge above 34% even out of transport mode. *lj

NHTSA · メーカー通報10058160モデルイヤー 2014原文(英語)で表示中 · 翻訳待ち詳細を見る →
i3 (2013) · 2013–2022
技術通報軽微電装NA

技術通報

Bmw i01(i3 and i3 rex: Information regarding customer concerns of intermittent charging failures or no charging at all. *lj

NHTSA · メーカー通報10058159モデルイヤー 2014原文(英語)で表示中 · 翻訳待ち詳細を見る →
i3 (2013) · 2013–2022
技術通報軽微電装NA

技術通報

Bmw model i01(i3 and i3 rex) : Information regarding the left side motor mount or motor mount support has failed. The electric drivetrain moves excessively in the chassis. *lj

NHTSA · メーカー通報10058157モデルイヤー 2014原文(英語)で表示中 · 翻訳待ち詳細を見る →
i3 (2013) · 2013–2022
技術通報軽微電装NA

技術通報

Bmw: Vehicle programmed; actual range vehicle capable of achieving to full charge not changed due to instrument cluster showing range lower than prior update of software. *pe

NHTSA · メーカー通報10057563モデルイヤー 2014原文(英語)で表示中 · 翻訳待ち詳細を見る →
i3 (2013) · 2013–2022
技術通報軽微電装NA

技術通報

Bmw: Level 2 charge will cause vehicle to increase charging time due to convenience charging electronics (kle), with faulty fitted capacitor. *pe

NHTSA · メーカー通報10057537モデルイヤー 2014原文(英語)で表示中 · 翻訳待ち詳細を見る →
i3 (2013) · 2013–2022
技術通報軽微電装NA

技術通報

Bmw: High voltage battery fails to charge above certain state when performing vehicle pdi and causes led ring around charge port to blink red. *pe

NHTSA · メーカー通報10057536モデルイヤー 2014原文(英語)で表示中 · 翻訳待ち詳細を見る →
i3 (2013) · 2013–2022
技術通報軽微電装NA

技術通報

Bmw: From rear of vehicle, banging noise is hear during load reversals, due to motor mount support or left side motor mount has failed causing electric drivetrain, within chassis, to move excessively. *pe

NHTSA · メーカー通報10057529モデルイヤー 2014原文(英語)で表示中 · 翻訳待ち詳細を見る →
i3 (2013) · 2013–2022
技術通報軽微電装NA

技術通報

Bmw: With drivetrain malfunction message displayed and service engine soon, engine can go into reduced power mode, due to engine position management (epm) unfavorable parameters in dme software. *pe

NHTSA · メーカー通報10056719モデルイヤー 2014原文(英語)で表示中 · 翻訳待ち詳細を見る →
i3 (2013) · 2013–2022
技術通報軽微電装NA

技術通報

Bmw: There is no drivability issues, or functionality, or emissions-related problems of check engine lamp (cel), due to an intermittent cel being illuminated. Model i01 (i3). *pe updated 9/4/14. *pe

NHTSA · メーカー通報10056093モデルイヤー 2014原文(英語)で表示中 · 翻訳待ち詳細を見る →
i3 (2013) · 2013–2022
技術通報軽微電装NA

技術通報

Bmw: A message, red or yellow check control, is displayed in instrument panel, after switching the ignition off. Model i01. *pe

NHTSA · メーカー通報10056092モデルイヤー 2014原文(英語)で表示中 · 翻訳待ち詳細を見る →
i3 (2013) · 2013–2022
技術通報軽微電装NA

技術通報

Bmw: On some vehicles, there may be a fault code (21f046) stored in the high voltage battery management electronics. Model i3 and i3 rex. Produced to 6/30/14. *js

NHTSA · メーカー通報10055984モデルイヤー 2014原文(英語)で表示中 · 翻訳待ち詳細を見る →

出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)、国土交通省(日本、公共データ利用規約1.0)、韓国国土交通部(car.go.kr)。