A vehicle arrives at your center to be diagnosed for a micro-leak in the fuel evaporative (EVAP) system(NVLD natural vacuum leak detection). For this condition, the following fault is stored in the DME: 190302 - fuel tank ventilation and scavenging air system, micro-leak: leakage more than 0.5mm For: Model vehicles other that the ones listed above, or for EVAP faults related to a large leak, after confirming that the fuel filler cap is fitted properly, then, proceed to follow the corresponding test plan
A vehicle arrives at your center to be diagnosed for a micro-leak in the fuel evaporative (EVAP) system (NVLD natural vacuum leak detection). For this condition, the following fault is stored in the DME: 190302 - fuel tank ventilation and scavenging air system, micro-leak: leakage more than 0.5 mm.
COOLANT LEAKING FROM THE LOW TEMPERATURE COOLING SYSTEM (B58C ENGINE): This Service Information Bulletin (Revision 1) replaces SI B17 02 20 dated March 2020. Premature breakdown of the coolant with gassing in the low temperature cooling system.
SI B16 15 14 January 2016 Fuel Supply Systems Technical Service.This Service Information bulletin supersedes SI B16 15 14 dated December 2014, designates changes to this revision. SUBJECT NVLD Tank Leakage FC 190302 Fuel Tank Ventilation and Purge Air System Micro Leak . The engine malfunction warning is illuminated and the following fault code is stored in the DME memory: FC 190302 Fuel tank ventilation and purge air system micro leak leakage greater than 0_5 mm. CAUSE: Contamination of the NVLD pressure switch diaphragm and/or the contamination of the NVLD dust filter.
A quality check revealed that the DME in these vehicles has a programming error. This results in a deviation of the fuel-air mixture in the internal combustion engine.
For certain model vehicles with the S68T engine, the Condition Based Service (CBS) data may show sparkplug replacement is due at a considerably earlier interval than specified in the Service and WarrantyInformational Booklet.
The NVLD limited emission related warranty for defects in materials or workmanship has been extended to 15 years/150,000 miles as determined from the original in-service date
Customer perceptions: Vehicles with optional equipment 01CR -Remote Engine Start. The Remote Engine Start selection is missing in the Pre-conditioning sub-menu The Remote Engine Start can be selected using the vehicle key. However, the Remote Engine Start isnot carried out. The Check Control message (number 2055) appears: Remote engine start not available Vehicles with optional equipment 07ME - M Drivers Package: The increased maximum speed is not reached Vehicles with optional equipment 01MB - M Drive Professional: The M MODE TRACK is no longer available Only the M MODES ROAD and SPORT are available Applies to all the customer perceptions: Chance of the error occurring: Very rare, sporadic Both faults listed below are entered in the DME fault memory: 021280 - DME: Certificates (type 1) not ready And 021283 - DME, Secure Feature Activation: Secure Token check still running or unchecked Secure Token present Motor vehicles affected: Vehicles with engine S68T Vehicles with drive unit XB1T
The Check Control message below appears even though the coolant level is not below minimum when theengine is cold. Check Control message (ID 166): Top up coolant.
出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)、国土交通省(日本、公共データ利用規約1.0)、韓国国土交通部(car.go.kr)。