技術通報
This bulletin provides a procedure to locate and repair a possible oil galley plug from between the engine and flexplate if found the cause of the customers concern of an oil leak from center of vehicle.
🔔 無料アカウントを作成して Buick アンクレイブ (すべての世代) のメール通知を受け取る
技術サービス通報(TSB)は、既知の不具合についてメーカーが販売店に送る修理指示です。安全リコールではありませんが、不具合の裏付けになることがよくあります。
This bulletin provides a procedure to locate and repair a possible oil galley plug from between the engine and flexplate if found the cause of the customers concern of an oil leak from center of vehicle.
This bulletin provides a procedure to locate and repair a possible cooler galley plug if found the cause of the customers concern of an oil leak from front of vehicle.
This bulletin provides a procedure to locate and repair a possible rolled seal at the intake actuator magnet if found the cause of the customers concern of an oil leak at top of engine.
This bulletin provides a procedure to locate a leak at the oil drain plug, clean it, and reinstall it to correct the concern.
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to vehicles being towed in due to loss of drive.
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to vehicles being towed in due to loss of drive.
This technical bulletin provides a procedure to replace both fuel feed lines for a leak and/or noise coming from pulses in the fuel line.
This engineering informational bulletin is requesting information from the field on warranty parts for complete canister assemblies that apply to the DTC codes specified and has leak conditions. Engineering is determining a root cause and developing a Field Fix.
This technical bulletin provides a procedure to replace both fuel feed lines for a leak and/or noise coming from pulses in the fuel line.
This technical bulletin provides a procedure to replace the rear diff assembly if the oil has leaked into the torque tube causing the rear diff to fail.
This technical bulletin provides a procedure to replace the crankshaft bearings and rear oil seal to correct the customers concer of an oil leak.
15532 - Service Update. This bulletin provides a service procedure to correct a potential oil leak on certain 2015 model year Buick Enclave, Chevrolet Traverse and GMC Acadia vehicles equipped with a HFV6 engine (RPO LLT). The potential leak is from the oil pan crank case at an engine mount hole location, which is not under engine oil system pressure. To correct this condition, dealers will remove the mounting bolt, clean the bolt and hole, apply thread sealant and reinstall the bolt.
Gm: The engine may be leaking from the front cover or oil filter adapter. This is not a recall. *js
A dealer is advised to perform no repairs if U3000 SYM 92 is found. Engineering is working on a resolution
Service Update. Certain vehicles listed above may have contamination inside the high-pressure fuel pump spill valve assembly. Dealers will replace the high pressure fuel pump.
Service Update. Certain vehicles listed above may have a condition in which a quality issue with the engine was identified. Dealers will replace the engine.
Service Update. Certain vehicles listed above may have a condition in which a quality issue with the engine was identified. Dealers will replace the engine.
This bulletin provides a procedure to verify a noise and replace the oil pump shaft assembly if the gears of the pump and balance shaft are found the issue of the customers concern.
This bulletin provides a procedure to replace the oil pump due to a loose drive pump gear not pressed on the pump shaft.
Special Coverage. Certain vehicles listed above may have a condition that could cause the mounting bracket on the front exhaust pipe to separate from the pipe. If this condition occurs, a hole may develop in the exhaust pipe at the bracket location, and a rattling or increased exhaust noise may be heard. This special coverage covers the condition described above for a period of 15 years or 150,000 miles (240,000 km), whichever occurs first, from the date the vehicle was originally placed in service, regardless of ownership. For vehicles covered by Vehicle Service Contracts, all eligible claims with repair orders on or after June 10, 2025, are covered by this special coverage and must be submitted using the labor operation codes provided with this bulletin. Claims with repair orders prior to June 10, 2025, must be submitted to the Service Contract provider. Vehicle owners or lessees who paid for repairs referenced in this Special Coverage (Customers) are eligible for reimbursement of their reasonable and customary expenses in accordance with the procedures specified below. The conditional right to reimbursement is provided by GM solely in the interest of customer satisfaction and is personal to Customers. Customers may not assign and GM does not consent to any assignment of any Customers right to submit reimbursement claims, or to receive reimbursement, or any other rights granted by this Special Coverage to any third party, including but not limited to service contract providers, and this Special Coverage is not intended to and does not confer any third party beneficiary, subrogation or contribution rights, or any other rights to reimbursement, against GM, whether in law, equity or otherwise, on any third parties. Dealers are to replace the front exhaust pipe as necessary. The repairs will be made at no charge to the customer.
This Preliminary information communicates to the technician to inspect the piston oil nozzles for damage if the vehicle exhibits P06DD anderratic oil pressure that is low at an idle. If any of the piston oil nozzles are damaged, replace all four piston oil nozzles.
This Preliminary information communicates a potential chirp noise coming from the engine compartment.
This engineering information (EI) closure ends the need for gathering further information from technicians in regard to a whine and/or chirp type noise heard coming from the engine compartment.
This bulletin provides a procedure to replace the oil pump due to a loose drive pump gear not pressed on the pump shaft.
This Preliminary information communicates when diagnosing P050D cold start misfire runs rough, if any fuel injectors need to be replaced, all the fuel injectors must be ordered and replaced at the same time due to fuel injector flow rates being matched.
出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)、国土交通省(日本、公共データ利用規約1.0)、韓国国土交通部(car.go.kr)。