閲覧無料 · 投稿は無料アカウントでAnticars(2000年)の後継

DDodge SRT-4

2003–2005 · 不具合1件 · 1市場

このファイルには、Dodge SRT-4で知られている不具合を、コミュニティが出典付きでまとめています。閲覧は無料、投稿には無料アカウントが必要です。信頼できる投稿者が十分に確認した不具合にはシールが付きます。

この車ではtransmission and drivetrainの問題がよく報告されています(苦情12件)が、原因はまだ誰も説明していません。ご存じですか?項目を書く

重大な不具合

すべて表示 (1) →
m
重大トランスミッションNA

Transmission and drivetrain: problems reported by owners

12 owners in the United States reported problems with the transmission and drivetrain of this car to NHTSA (model years 2005), typically at around 7,000 miles. Most often named: manual transmission (33%), automatic transmission (25%). Reported consequences: 2 crashes.

✓ 公的データに基づくMecafileの分析2005原文(英語)で表示中 · 翻訳待ち詳細を見る →

最新の公式リコール

このモデルの公式リコールは見つかりませんでした。

最新の技術サービス通報

すべて表示 (20) →
技術通報軽微その他NA

技術通報

KEY, Master If replacing the key/FOBIK on a WJ, KJ, TJ, or PT Cruiser, use the "AC" NIC level part number. The "AB" NIC level will not program to these platforms. For all other platforms, if the "AB" NIC level will not program to the vehicle, use the "AC" NIC level part and submit a part warranty.

NHTSA · メーカー通報10229256モデルイヤー 2005原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報軽微その他NA

技術通報

KEY, Master If replacing the key/FOBIK on a WJ, KJ, TJ, or PT Cruiser, use the "AC" NIC level part number. The "AB" NIC level will not program to these platforms. For all other platforms, if the "AB" NIC level will not program to the vehicle, use the "AC" NIC level part and submit a part warranty.

NHTSA · メーカー通報10221686モデルイヤー 2005原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報軽微トランスミッションNA

技術通報

Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.

NHTSA · メーカー通報10221097モデルイヤー 2005原文(英語)で表示中 · 翻訳待ち詳細を見る →

出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)。