閲覧無料 · 投稿は無料アカウントでAnticars(2000年)の後継

Ford ブロンコ

1979– · 5 世代 · 不具合53件 · 5市場
世代
年式
ブロンコ VI · 2021–
リコール重大内装NA

Seat belts:Critical fasteners

Ford Motor Company (Ford) is recalling certain 2021-2023 Bronco vehicles built with the 5-Door body style. The first-row seat belt latch plates may be difficult to access from their stowed position. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant Crash Protection."

NHTSA · 米国2023年5月18日23V358000モデルイヤー 2021–2023原文(英語)で表示中 · 翻訳待ち詳細を見る →
ブロンコ IV (1987) · 1986–1991
リコール重大内装NA

Seats

Wiring for the power lumbar seat system was routed directly beneath the seat cushion springs and may be abraded by the springs.

NHTSA · 米国1988年9月2日88V145000モデルイヤー 1986原文(英語)で表示中 · 翻訳待ち詳細を見る →
ブロンコ VI · 2021–
リコール中程度内装NA

エアバッグ:サイド/ウィンドウ:カーテン

フォード・モーター・カンパニー(フォード)は、特定の2026年式ブロンコ車両をリコールしています。右側サイドカーテンエアバッグの取り付けブラケットに金属のバリが残っている可能性があり、展開時にエアバッグが裂けるおそれがあります。

NHTSA · 米国2026年9月9日26V580000モデルイヤー 2026自動翻訳 · 原文:英語詳細を見る →
ブロンコ VI · 2021–
ブロンコ VI · 2021–
リコール中程度内装KR

실내안전장치 기타

프레임(Pivot link) 제조 업체의 공정 절차 오류로 인한 볼트 풀림 방지 접착제의 접착력 저하로 인해 해당 볼트가 느슨해질 경우 시트 쿠션에서 소음이 발생하거나 유격이 느껴질 수 있으며, 볼트가 이탈되면 충돌 시 탑승자의 부상 위험이 증가할 수 있음이 확인됨에 따른 리콜

国土交通部 · 韓国2026年7月2日6293モデルイヤー 2024–2025原文(韓国語)で表示中 · 翻訳待ち詳細を見る →
ブロンコ VI · 2021–
リコール中程度内装KR

실내안전장치 기타

운전석 및/또는 조수석 시트 높이 조절 장치 프레임(Pivot link)에 볼트 장착부 규격 문제로 일부 고정 볼트가 점차 느슨해질 수 있으며, 이런 경우 시트 쿠션에서 소음이 발생하거나 유격이 느껴질 수 있고, 볼트가 이탈되면 충돌 시 탑승자의 부상 위험이 증가할 수 있음이 확인됨에 따른 리콜

国土交通部 · 韓国2026年6月2日6251モデルイヤー 2022原文(韓国語)で表示中 · 翻訳待ち詳細を見る →
ブロンコ VI · 2021–
リコール中程度内装NA

Seats:Critical fasteners

Ford Motor Company (Ford) is recalling certain 2024-2026 Ranger and Bronco vehicles. The front seats may have a loose or dislodged seat frame height-adjust pivot bolt.

NHTSA · 米国2026年4月28日26V268000モデルイヤー 2024–2026原文(英語)で表示中 · 翻訳待ち詳細を見る →
ブロンコ VI · 2021–
リコール中程度内装KR

실내안전장치 기타

공급 업체의 조립 과정에서 액티브 벤트 플랩이 장착되는 부분에 손상이 발생되었을 수 있으며, 이런 경우 에어백이 전개되는 충돌 발생 시 에어백 압력이 정상적으로 조절되지 않아 탑승자의 부상 위험이 높아질 수 있음이 확인됨에 따른 리콜 (이는 FMVSS (미국안전기준) 208번 탑승자 충돌 보호를 준수하지 못할 수 있음)

国土交通部 · 韓国2026年1月26日6011モデルイヤー 2025原文(韓国語)で表示中 · 翻訳待ち詳細を見る →
ブロンコ VI · 2021–
リコール中程度内装KR

승차 및 실내장치 기타

예상하지 못한 계기판 소프트웨어 오류로 인해 시동 종류 후 절전 모드 진입 단계에서 재시동 시 계기판 미작동 현상이 발생할 수 있으며, 이런 경우 주요 주행 정보(속도계, 경고등) 식별 불가로 이어져 안전 운행을 저해할 우려가 있음이 확인됨에 따른 리콜

国土交通部 · 韓国2025年12月19日5974モデルイヤー 2025原文(韓国語)で表示中 · 翻訳待ち詳細を見る →
ブロンコ VI · 2021–
リコール中程度内装KR

승차 및 실내장치 기타

인포테인먼트 화면 관련 소프트웨어 오류가 있을 수 있으며, 이런 경우 인포테인먼트 화면이 정지되거나, 갑자기 시스템이 재부팅될 수 있고 어라운드 뷰(360º 카메라) 또는 후방 카메라 시스템 작동 중 이러한 현상이 발생되는 경우 주변 및/또는 후방 시야에 영향을 미쳐 충돌 위험을 증가시킬 수 있는 가능성이 확인됨에 따른 리콜 <대상차량별 생산일자> 2023~2024년식 Ranger Raptor: 2023.02.21~2023.08.23 2023년식 Ranger Wildtrak: 2023.07.18~2023.08.11 2024년식 Mustang: 2023.10.10~2023.12.13 2023년식 Nautilus: 2023.05.15~2023.08.11 2022~2024년식 Expedition: 2021.12.08~2024.05.15 2023~2024년식 Navigator: 2023.02.22~2023.08.08 2022~2024년식 Bronco: 2022.02.17~2023.12.07

国土交通部 · 韓国2025年10月24日5896モデルイヤー 2021–2024原文(韓国語)で表示中 · 翻訳待ち詳細を見る →
ブロンコ VI · 2021–
リコール中程度内装NA

Seats:Critical fasteners

Ford Motor Company (Ford) is recalling certain 2021-2023 Bronco vehicles. The front seats may have a loose or dislodged seat frame height-adjust pivot bolt.

NHTSA · 米国2025年10月23日25V721000モデルイヤー 2021–2023原文(英語)で表示中 · 翻訳待ち詳細を見る →
ブロンコ VI · 2021–
リコール中程度内装NA

Air bags:Frontal

Ford Motor Company (Ford) is recalling certain 2025 Bronco vehicles. The active vent flap on the passenger side may prevent the air bag from deploying as intended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant Crash Protection."

NHTSA · 米国2025年6月13日25V396000モデルイヤー 2025原文(英語)で表示中 · 翻訳待ち詳細を見る →
ブロンコ VI · 2021–
リコール中程度内装NA

Seats:Critical fasteners

Ford Motor Company (Ford) is recalling certain 2025 Ranger and Bronco vehicles. The bolts that secure the driver's seat frame to the body may be loose or missing. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 207, "Seating Systems."

NHTSA · 米国2025年5月9日25V311000モデルイヤー 2025原文(英語)で表示中 · 翻訳待ち詳細を見る →
ブロンコ VI · 2021–
リコール中程度内装KR

실내안전장치 기타

차량의 1열 안전벨트 래치(걸쇠)가 생산과정에서 잘못된 위치에 장착되었을 수 있으며, 이로 인해 고객이 안전벨트 래치(걸쇠)에 접근이 용이하지 않아 안전벨트를 착용하지 않고 운전할 수 있으며 이런 경우 충돌 시 부상 위험이 높아질 수 있는 가능성에 따른 리콜

国土交通部 · 韓国2023年9月8日4901モデルイヤー 2022–2023原文(韓国語)で表示中 · 翻訳待ち詳細を見る →
ブロンコ VI · 2021–
リコール中程度内装NA

Air bags:Sensor:Side impact

Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles. The right or left side impact sensors may not be properly secured to the vehicle.

NHTSA · 米国2022年12月14日22V928000モデルイヤー 2021–2022原文(英語)で表示中 · 翻訳待ち詳細を見る →
ブロンコ VI · 2021–
リコール中程度内装NA

Air bags:Frontal

Ford Motor Company (Ford) is recalling certain 2021 Bronco vehicles. During passenger air bag deployment, an air bag vent could open prematurely and result in an improper deployment. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant Crash Protection."

NHTSA · 米国2021年10月1日21V770000モデルイヤー 2021原文(英語)で表示中 · 翻訳待ち詳細を見る →
ブロンコ III · 1979–1986
リコール中程度内装NA

Seat belts:Front:Anchorage

The bolts that attach the d-shaped ring for the shoulder belt are inadequately supported by the material in which they are mounted. The attachment does not comply with the requirements of federal motor vehicle safety standard no. 210, "seat belt assembly anchorages".

NHTSA · 米国1983年12月20日83V134000モデルイヤー 1984原文(英語)で表示中 · 翻訳待ち詳細を見る →
ブロンコ III · 1979–1986
リコール中程度内装NA

リコール

The upper torso restraint d-ring which attaches the shoulder belt to the b pillar, under certain test conditions, separated from its anchorage, and may not comply with cmvss 210 - belt anchorage.

カナダ運輸省1983年12月17日1983114モデルイヤー 1984原文(英語)で表示中 · 翻訳待ち詳細を見る →
ブロンコ III · 1979–1986
リコール中程度内装NA

リコール

This vehicle does not comply with cmvss 207 - seat anchorages. Note - this vehicle was retailed in new brunswick.

カナダ運輸省1983年6月13日1983054モデルイヤー 1983原文(英語)で表示中 · 翻訳待ち詳細を見る →
ブロンコ III · 1979–1986
リコール中程度内装NA

Seats

The manufacturer suspects that the hardware that attaches the seat tracks (the strips that the seat slides on) to the floor may become loose or may fail to hold the seat in place during a collision. This condition is due to the substitution of an incorrect washer during manufacture. The vehicles may not comply with the strength requirements of federal motor vehicle safety standard 207, "seating systems".

NHTSA · 米国1983年2月24日83V020000モデルイヤー 1983原文(英語)で表示中 · 翻訳待ち詳細を見る →

出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)、国土交通省(日本、公共データ利用規約1.0)、韓国国土交通部(car.go.kr)。