技術通報
対象となるGV70 Electrified(JK1A EV)およびG80 Electrified(RG3 EV)の一部車両では、車両をReady モードにすると、DTC U151A8C および/または U151B8C が表示され、誤った警告灯が点灯する場合があります。本技術情報は、この症状に対処するためのVehicle Control Unit(VCU)ソフトウェアの更新手順を示すものです。
🔔 無料アカウントを作成して Genesis G80 (すべての世代) のメール通知を受け取る
技術サービス通報(TSB)は、既知の不具合についてメーカーが販売店に送る修理指示です。安全リコールではありませんが、不具合の裏付けになることがよくあります。
対象となるGV70 Electrified(JK1A EV)およびG80 Electrified(RG3 EV)の一部車両では、車両をReady モードにすると、DTC U151A8C および/または U151B8C が表示され、誤った警告灯が点灯する場合があります。本技術情報は、この症状に対処するためのVehicle Control Unit(VCU)ソフトウェアの更新手順を示すものです。
Certain 2023-2025MY GV70 Electrified (JK1A EV), 2023-25MY GV60 (JW1 EV) and 2023-25MY G80 Electrified (RG3 EV) vehicles may exhibit a condition while driving where the 12V battery voltage drops below the operational voltage and the Vehicle Control Unit (VCU) places the vehicle in Limp Home mode. The VCU software in this bulletin updates the maximum vehicle speeds for various levels of 12V battery voltage when the vehicle enters Limp Home mode.
This bulletin describes the procedure to install an Audio Video Navigation (AVN) software update which repairs a condition in which the radio presets may reset during AVN start up.
Certain 2023-2024MY G80 Electrified (RG3 EV), 2023-2024MY GV60 (JW1 EV), and 2023-2024MY GV70 Electrified (JK1a EV) may have a condition of the power down warning light (turtle symbol) with "Power is limited" displayed in the cluster, and possible DTC P0A2F. If you are servicing a vehicle with either of these conditions, follow this bulletin to inspect the EOP.
Certain 2023MY G80 Electrified (RG3 EV), 2023-24MY GV60 (JW1 EV), and 2023-24MY GV70 Electrified (JK1a EV) vehicles may have a condition where low 12V auxiliary battery charging occurs due to an ICCU (Integrated Charge Control Unit) fault and may set the following DTC P1A9096 DC/DC Converter Input Voltage Sensor Fault. When a fault occurs, the vehicle may enter a reduced power mode while various warning lights, an audible chime will sound, and large messaging in the vehicles instrument cluster will appear, instructing the driver to stop the vehicle. The vehicle will be inspected for a DTC P1A9096 and may require either an ICCU software update or ICCU replacement and fuse replacement.
Certain 2023MY G80 Electrified (RG3 EV), 2023-24MY GV60 (JW1 EV), and 2023-24MY GV70 Electrified (JK1a EV) vehicles may have a condition where low 12V auxiliary battery charging occurs due to an ICCU (Integrated Charge Control Unit) fault and may set the following DTC P1A9096 DC/DC Converter Input Voltage Sensor Fault. When a fault occurs, the vehicle may enter a reduced power mode while various warning lights, an audible chime will sound, and large messaging in the vehicles instrument cluster will appear and instruct the driver to stop the vehicle. The Service Procedure flow to be followed is outlined by the flowchart on Page-3. The ICCU system is to be checked by GDS for DTC P1A9096 and depending on the result, will involve either an ICCU software update, or ICCU and fuse replacement.
Certain 2023MY G80 Electrified (RG3 EV) and 2023-24MY GV60 (JW1 EV), vehicles may have a condition where low 12V auxiliary battery charging occurs due to an ICCU (Integrated Charge Control Unit) fault and may set the following DTC P1A9096 DC/DC Converter Input Voltage Sensor Fault. When a fault occurs, the vehicle may enter a reduced power mode while various warning lights, an audible chime will sound, and large messaging in the vehicles instrument cluster will appear and instruct the driver to stop the vehicle. The Service Procedure flow to be followed is outlined by the flowchart on Page-3. The ICCU system is to be checked by GDS for DTC P1A9096 and depending on the result, will involve either an ICCU software update, or ICCU and fuse replacement.
Certain 2023MY G80 Electrified (RG3 EV) and 2023-24MY GV60 (JW1 EV), vehicles may have a condition where low 12V auxiliary battery charging occurs due to an ICCU (Integrated Charge Control Unit) fault and may set the following DTC P1A9096 DC/DC Converter Input Voltage Sensor Fault. When a fault occurs, the vehicle may enter a reduced power mode while various warning lights, an audible chime will sound, and large messaging in the vehicles instrument cluster will appear, instructing the driver to stop the vehicle. The vehicle will be inspected for a DTC P1A9096 and may require either an ICCU software update or ICCU replacement and fuse replacement.
一部のGenesis G80/G90は、Portsから出荷される際、助手席側の床に「ソーラーパネル式12Vバッテリーメンテナー」の箱が置かれた状態で届きます。このソーラーパネルは、車両がディーラーのヤードで保管されている間に使用するため、PDI(納車前点検)時に取り付けてください。取り付け手順については、TSB 17-EE-001を参照してください。
This bulletin provides information for new software to update the navigation and display audio system to include the apple carplay and android auto feature. This bulletin describes how to transfer the update software to a storage drive (usb or sd card) and perform the software installation into the audio system.
Certain 2023–2025 model year Genesis GV60, 2023–2025 model year Genesis GV70 Electrified, and 2023–2025 model year Genesis G80 Electrified vehicles may require replacement of the Integrated Charging Control Unit (ICCU) and ICCU Fuse. At Genesis, we are committed to providing vehicles of outstanding quality and value. In an effort to meet this commitment, Genesis is extending the warranty coverage for the ICCU and ICCU Fuse Replacement under this condition to 15 years or 180,000 miles from the date of original retail delivery or date of first use and is valid for original and subsequent owners.
Your vehicle may exhibit battery drain due to the Central Control Panel (CCP) not entering sleep mode. At Genesis, we are committed to providing vehicles of outstanding quality and value. In an effort to meet this commitment, Genesis is conducting a campaign to update the Central Control Panel (CCP) Software at NO CHARGE to you.
Certain G80 (RG3) and GV80 (JX1) vehicles may exhibit battery drain due to the Central Control Panel (CCP) not entering sleep mode. This occurs when a communication error causes the touch-module control IC and MCU to repeatedly reinitialize, preventing the system from entering sleep mode.
Certain G80 (RG3) and GV80 (JX1) vehicles may exhibit battery drain due to the Central Control Panel (CCP) not entering sleep mode. This occurs when a communication error causes the touch-module control IC and MCU to repeatedly reinitialize, preventing the system from entering sleep mode. This bulletin provides instructions to perform a software update for the CCP.
This bulletin provides a diagnostic and inspection procedure for addressing parking camera error conditions for G80 (RG3), GV70 (JK1/JK1A), and GV80 (JX1) vehicles. Follow the information in this TSB on the symptoms, causes, and associated diagnostic steps for camera issues based on the screen color and DTCs.
Certain GV70 Electrified (JK1A EV), GV60 (JW1 EV), and G80 Electrified (RG3 EV) vehicles may exhibit a condition while charging with a 240V AC (Level 2) charger where the vehicle experiences an interrupted charging session or a lower charging speed. This occurs to prevent potential damage to the charging cable connection. Follow the procedure in this TSB to update the software logic for the Vehicle Charging Management System (VCMS), which initiates a self-restart that allows the vehicle charging to return to full capacity once stabilized.
Certain 2022MY Genesis G80 (RG3) vehicles may exhibit a condition where the interior mood/ambient lamp color cannot be changed. This bulletin provides the service procedure to update the MLM (Mood Lamp Master) system software to resolve the condition stated above.
This bulletin provides the procedure to inspect, and if necessary adjust the headlight aim on some 2021 MY Genesis G80 (RG3) vehicles equipped with Light Emitting Diode (LED) headlamps. The adjustment can help improve headlamp focus and reduce glare from the headlights to oncoming traffic.
This bulletin provides the procedure to inspect, and if necessary adjust the headlight aim on some 2021 MY Genesis G80 (RG3) vehicles equipped with Light Emitting Diode (LED) headlamps. The adjustment can help improve headlamp focus and reduce glare from the headlights to oncoming traffic.
This bulletin provides the procedure to inspect, and if necessary adjust the headlight aim on some 2021 MY Genesis G80 (RG3) vehicles equipped with Light Emitting Diode (LED) headlamps. The adjustment can help improve headlamp focus and reduce glare from the headlights to oncoming traffic.
This bulletin provides information related to the ECM(Engine Control Module) software update for G80/G90 with 5.0L GDI engine equipped vehicles. This updates the software logic dealing with OBD communication test.
この技術速報は、OBD(車載自己診断)ロジックの改善を目的としたECM(エンジンコントロールモジュール)ソフトウェアアップデートに関する情報を提供するものです。燃料システムのレディネス設定ロジックが更新されました。
If you are servicing a vehicle with a missing or damaged insulation cap from the EV Charging Port follow the information in this TSB to replace any missing/damaged insulation cap(s) on certain 2023-24MY GV60 (JW1 EV), G80 Electrified (RG3 EV) and GV70 Electrified (JK1a EV) vehicles. The charging insulation caps are important to ensure proper charger connector orientation and fit to the vehicle charge port.
This bulletin is issued to provide the extended battery diagnosis procedure using GDS. This battery diagnosis function displays the various battery-related faults such as: Internal short circuit Battery deterioration Malfunction of electronic parts Insufficient battery charge Normal battery Charging defect Battery diagnosis uses the battery sensor history saved for the last 30 days and ICU diagnostic communication to track battery state of charge (SOC) and current parasitic draw history.
This bulletin provides the procedure for updating the software of the Vehicle Charge Management System (VCMS) to improve charging. It may address an intermittent stops charging condition or the following EV Light On DTC condition: DTC P1ABD00 Battery Charger Coupler Temperature Too High
出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)、国土交通省(日本、公共データ利用規約1.0)、韓国国土交通部(car.go.kr)。