Certain light duty pickup trucks and sport utility vehicles fail to conform to federal motor vehicle safety standard no. 209, "seat belt assemblies." one of the two sensors in the driver's and front passenger's seat belt retractors could be inoperative. The seat belt retractors will lock when the belt webbing is extracted during a crash; however, the mechanism that locks the seat belt retractor when the vehicle decelerates quickly, such as heavy braking, may not operate as intended.
On certain mini vans, passenger and sport utility vehicles, some of these vehicles have a driver's side air bag that may not deploy as designed. In addition, the air bag inflator could rupture.
Certain vehicles originally built with cloth seats that were equipped with an automatic air bag passenger sensing system and later reupholstered with aftermarket leather seat cover kits are involved. Testing has indicated that the aftermarket leather seat covers can cause the passenger sensing system to malfunction.
Certain sport utility vehicles were built with a driver's seat belt buckle assembly that contains an energy-absorbing loop. Sustained loads of sufficient magnitude and duration on the belt in severe crashes could fully deploy the buckle energy-absorbing loop, introducing a total of 10 additional inches of webbing into the seat belt system. The free falling latch plate used in this system may allow webbing to dynamically distribute between the lap and shoulder belt as the driver's position changes during a multiple rollover event.
Vehicle description: Passenger vehicles, light duty trucks, sport utility vehicles, and mini vans equipped with trw seat belt buckle assemblies. The buckle base of these seat belt assemblies were not properly heat treated and therefore do not pass the load bearing requirement of federal motor vehicle safety standard no. 209, "seat belt assemblies."
On certain vehicles, the driver's and/or passenger's front outboard seat-belt webbing could separate during a frontal impact having at least the same dynamics as a 48 kph frontal barrier collision. If a separation occurred and there were secondary crash events or rollover, there would be no restraint of the occupant and increased injuries could occur. Correction: A protector cover will be installed over the recliner mechanism.
Vehicle description: Extended cab pickup trucks equipped with 60/40 front bench seats and extended cab pickup trucks and 2-door utility vehicles equipped with manual locking recliner bucket seats. The outboard safety belt webbing on the driver's and/or passenger's seat can separate during a frontal impact.
Certain minivans, passenger and sport utility vehicles fail to comply with the requirements of federal motor vehicle safety standard no. 225, "child restraint anchorage system." the owner's manual does not explain the meaning of the location symbols for the child restraint lower universal anchorage system.
出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)、国土交通省(日本、公共データ利用規約1.0)、韓国国土交通部(car.go.kr)。