Certain sport utility vehicles that have been exposed to fuel contaminated with silicon may develop small pin holes in the fuel pump feed port. Silicon has been identified in the fuel systems of affected vehicles and in certain fuel available in the region of tyler, texas. This recall will be launched for vehicles registered in texas and the four surrounding states: Oklahoma, arkansas, new mexico and louisiana.
Vehicle description: Sport utility vehicles. During the manufacture of certain fuel return hoses, incorrect rubber material for the outer layer was used.
Vehicles with 3.2 litre engines may experience dislodging of the camshaft end plug(s) from the cylinder heads causing rapid oil loss. Oil spilling on the exhaust system could result in an engine compartment fire. Correction: A camshaft end plug retaining plate kit will be installed on affected vehicles.
Constant expansion and contraction of the cylinder head causes the camshaft seal end plug can become dislodged from the cylinder head. This allows oil to leak from the camshaft.
On vehicles with automatic transmission and v6 engine, overfilling of transmission oil in conjunction with high oil temperature, could cause oil to flood through the air bleed groove in the oil level gauge plug. Leaking oil could wet the exhaust manifold and result in an engine compartment fire. Correction: Dealers will install a new automatic transmission dipstick with an improved plug design and clearer oil level marks.
On certain vehicles, a fuel return hose may not contain the desired ozone protection which could result in the hose having a reduced life expectancy. Over time, the hose may deteriorate and leak fuel. Correction: Dealers will inspect the fuel return hose date code and replace the hose if required.
Certain V6 Rodeo do not comply with the requirements of CMVSS 1105 - Evaporative Emissions. The rubber purge hose of the Enhanced Evaporative Emission Control System (EVAP) may crack, due to proximity of the exhaust pipe. Correction: Dealers will install an EVAP pipe and hose assembly using a clearance template, and will inspect routing clearances after installation.
出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)、国土交通省(日本、公共データ利用規約1.0)、韓国国土交通部(car.go.kr)。