TSB: Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of TIS and the Calibration Update Wizard (CUW). To ensure the correct ECU software is installed, ECUs will require a Security Signature before the ECU will initialize the flash reprogramming sequence. This bulletin also details the process for acquiring a Security Signature from TIS during the Techstream ECU flash reprogramming process
TSB: 2022 model year Lexus vehicles are equipped with a factory-installed SiriusXM Satellite Radio, including a 90-day free customer trial. As part of the Pre-Delivery Service (PDS) process, ensure that the SiriusXM satellite radio is activated and ready for use.
TSB: 2021 model year Lexus vehicles are equipped with factory-installed XM Satellite Radio, including a 90-day free customer trial. As part of the Pre-Delivery Service (PDS) process, ensure that the XM Satellite Radio is activated and ready for use.
TSB: The 2021 model year Lexus vehicles are equipped with factory-installed XM Satellite Radio, including a 90-day free customer trial. As part of the Pre-Delivery Service (PDS) process, ensure that the XM Satellite Radio is activated and ready for use.
TSB: Some 2021 model year Lexus vehicles are equipped with an eOwner?s Manual (eOM), which is installed into the head unit while the vehicle is in transit. During Pre-Delivery Service (PDS), follow the instructions contained within the Software Confirmation section of this bulletin to ensure that the software is installed correctly. If it is found that the software is not installed correctly, proceed to the Software Installation section of this bulletin. It may also be necessary to reinstall the eOM software after replacing the head unit. Refer to the Software Confirmation section of this bulletin to determine if the software is already installed. If the software is not installed, proceed to the USB Flash Drive Preparation and Software Installation sections of this bulletin.
TT: This bulletin is regarding best practices when handling navigation systems that use Hard Disc Drive or Micro SD Card memory. 1. First type is generation 6 or 7 which utilizes HDD (Hard Disc Drive). Pioneer models that begin with NXH, have map data, operating system and other information in the Hard Disc Drive. With this system if a radio is being sent back for an exchange. The original Hard Disc Drive needs to be removed and installed into the newly serviced radio.
TSB: REVISION NOTICE December 12, 2018 Rev1: ? The D/C Cut Fuse Installation section has been updated. Any previous printed versions of this bulletin should be discarded. This bulletin contains the vehicle specific pre-delivery services for 2019 model year LX570 vehicles. Additionally, refer to the applicable Pre-Delivery Service (PDS) Check Sheet for services to be performed.
TSB: 2020 model year Lexus vehicles are equipped with factory-installed XM Satellite Radio, including a 90-day free customer trial. As part of the Pre-Delivery Service (PDS) process, ensure that the XM Satellite Radio is activated and ready for use.
TSB: 2018 model year Lexus vehicles are equipped with factory installed XM Satellite Radio, including a 90-day free customer trial. As part of the Pre-Delivery Service (PDS) process, ensure that the XM Satellite Radio is activated and ready for use.
TSB: REVISION NOTICE June 20, 2018 Rev1: ? Applicability has been updated to include 2019 model year Lexus vehicles. Any previous printed versions of this bulletin should be discarded. 2018 ? 2019 model year Lexus vehicles are equipped with factory installed XM Satellite Radio, including a 90-day free customer trial. As part of the Pre-Delivery Service (PDS) process, ensure that the XM Satellite Radio is activated and ready for use.
LSB: 2016 model year Lexus vehicles are equipped with factory installed XM Satellite Radio, including a 90-day free customer trial. As part of the Pre-Delivery Service (PDS) process, ensure that the XM Satellite Radio is activated and ready for use.
LSB: 2016 model year Lexus vehicles are equipped with factory installed XM Satellite Radio, including a 90-day free customer trial. As part of the Pre-Delivery Service (PDS) process, ensure that the XM Satellite Radio is activated and ready for use.
TSB: 2017 model year Lexus vehicles are equipped with factory installed XM Satellite Radio, including a 90-day free customer trial. As part of the Pre-Delivery Service (PDS) process, ensure that the XM Satellite Radio is activated and ready for use.
LSB: 2016 model year Lexus vehicles are equipped with factory installed XM Satellite Radio, including a 90-day free customer trial. As part of the Pre-Delivery Service (PDS) process, ensure that the XM Satellite Radio is activated and ready for use.
TSB: To minimize battery discharge during transportation and storage, the D/C Cut Fuse (30A) has been removed at the assembly plant and temporarily stored in the engine compartment Relay Block. Reinstall the D/C Cut Fuse (30A) into its original location and confirm all related diagnostic trouble codes (DTCs) are cleared during Pre-Delivery Service (PDS).
To minimize battery discharge during transportation and storage, the Short Pin has been removed at the assembly plant and temporarily stored in the engine compartment Relay Block. Reinstall the Short Pin into its original location and confirm all related DTCs are cleared during Pre-Delivery Service (PDS).
The towing wire harness connector set (contains towing wire harness connector assembly and 2 bolts) is loaded in the vehicle at the assembly plant. Use the following procedure to install the towing wire harness connector to the vehicle during Pre-Delivery Service (PDS).
Updated navigation system firmware has been developed to remedy this condition. This software MUST be installed into the vehicle before performing a map update using the Navigation Update Tool.
TSB: The towing wire harness connector set (towing wire harness connector assembly and 2 bolts) is loaded in the vehicle at the assembly plant to avoid damage in transit. Use the following procedure to install the towing wire harness connector to the vehicle during Pre-Delivery Service (PDS).
TSB: To minimize battery discharge during transportation and storage, the D/C Cut Fuse has been removed at the assembly plant and temporarily stored in the engine compartment Relay Block. Reinstall the D/C Cut Fuse into its original location and confirm all related DTCs are cleared during Pre-Delivery Service (PDS).
LSB: The towing wire harness connector set (towing wire harness connector assembly and 2 bolts) is loaded in the vehicle at the assembly plant to avoid damage in transit. Use the following procedure to install the towing wire harness connector to the vehicle during Pre-Delivery Service (PDS).
LSB: Lexus models equipped with Hard Disk Drive (HDD) Navigation require a Special Service Tool and follow a unique process for updating map, points of interest, and system software. Instead of individual DVDs installed into the vehicle, all Map Data is uploaded directly to the HDD system. Map Data will be released annually through direct shipment of tow Map Data DVDs to each dealership service manager. The annual Map Data release must then be installed onto the Navigation Update Tool. Individual map updates are then loaded into the vehicles with special map security keys. These keys are available through the normal parts ordering system. Keys are loaded onto the Navigation Update Tool through a PC or Techstream unit using software found on the Technical Information System (TIS). Follow the procedures listed in this bulletin to: Identify the current version of Map Data on the vehicle and on the Navigation Update Tool, Load Map Data onto the Navigation Update Tool, Load map security key(s) onto the Navigation Update Tool, and Connect the Navigation Update Tool to the vehicle and update the Map/System Data to the latest version.
LSB: To minimize battery discharge during transportation and storage, the D/C Cut Fuse has been removed at the assembly plant and temporarily stored in the engine compartment Relay Block. Reinstall the D/C Cut Fuse into its original location and confirm all related DTCs are cleared during Pre-Delivery Service (PDS).
TSB: Lexus models equipped with Hard Disk Drive (HDD) Navigation require a Special Service Tool and follow a unique process for updating the map, points of interest, and system software. Instead of individual DVDs installed into the vehicle, ALL map data is uploaded directly to the HDD system.
TSB: The towing wire harness connector set (contains towing wire harness connector assembly and 2 bolts) is loaded in the vehicle at the assembly plant. Use the following procedure to install the towing wire harness connector to the vehicle during Pre-Delivery Service (PDS).
出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)、国土交通省(日本、公共データ利用規約1.0)、韓国国土交通部(car.go.kr)。