火災が発生する可能性があります
点火スイッチの接点間に炭化グリースがたまり、スイッチ内部の絶縁性能が低下することがあります。この状態でスイッチは熱を発生させ、煙が発生し、最悪の場合は火災につながる可能性があります。
🔔 無料アカウントを作成して Mazda プロシード (すべての世代) のメール通知を受け取る
点火スイッチの接点間に炭化グリースがたまり、スイッチ内部の絶縁性能が低下することがあります。この状態でスイッチは熱を発生させ、煙が発生し、最悪の場合は火災につながる可能性があります。
プレッシャーレギュレータ(燃料圧力調整装置)用の負圧ホースの取り回しが不適切な ため、走行中にインテークマニホールド内で発生した水滴が負圧ホースからプレッシャー レギュレータ内に浸入することがある。そのため、極低温下でエンジンを停止した場合、 浸入した水滴が凍結してプレッシャーレギュレータが作動しなくなり、最悪の場合、エン ジンを始動するとフューエルホースとフューエルパイプの接合部から燃料が漏れるおそれ がある。
The flexible section of the chassis mounted fuel line could contact the exhaust manifold. This could result in damage to the fuel line and a possible fuel leak. Fuel leakage, in the presence of an ignition source, could result in a fire. Correction: An additional clip will be installed to hold the fuel line in the intended design position.
Vehicle description: Light duty 4x2 and 4x4 pickup trucks equipped with 4.0l engines. The flexible section of the chassis mounted fuel line that connects to the engine was routed too close to the exhaust manifold. The line could contact the manifold.
The flexible portion of the front fuel hoses on these vehicles may be susceptible to cracking. Cracked fuel lines could cause fuel leakage, and, in the presence of an ignition source, a fire could result. Correction: Front fuel lines will be inspected and, if necessary, replaced.
The front fuel lines have a section of flexible hose that is susceptible to cracking which can allow fuel leakage.
On certain vehicles, the speed control cable could interfere with the speed control servo pulley and not allow the throttle to return to idle when disengaging the speed control. If the speed control is used and this condition is present, a stuck throttle could result, which could potentially cause a vehicle crash. Correction: Cruise control cable will be inspected and if necessary, replaced.
Vehicle description: Certain 1998-1998 mazda b-series trucks (b2500, b3000 and b4000) equipped with cruise control and built from january 1998 through march 4, 1999. A cruise control cable can interfere with the speed control servo pulley and not allow the throttle to return to idle when disengaging the cruise control.
Operation at highway speeds over extended intervals during extreme cold conditions may result in ice forming in the throttle body of the engine. This may eventually cause the throttle plate to remain in the highway cruising position after the accelerator is released or the speed control is deactivated. Correction: Air intake duct and valve assembly will be replaced with revised units.
出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)、国土交通省(日本、公共データ利用規約1.0)、韓国国土交通部(car.go.kr)。