Park Assist Sensor 3 and 4 Harness Swap This bulletin provides information regarding the wire harness connectors for Park Assist Sensors #3 and #4. The harnesses for these sensors are visually identical and may have been interchanged during vehicleassembly. If diagnosis indicates a concern related to Park Assist Sensors #3 or #4, or associated wiring, visually inspect the harness connections to verify correct installation before proceeding with further repair Fig. 1. If the connectors are found to be swapped, release the harnesses from the retaining clips as necessary, disconnect, and reinstall each connector to the correct sensor location. Ensure harnesses are properly secured after repositioning.
NANHTSA · メーカー通報11033334
技術サービス通報
原文(英語)で表示中 · 翻訳待ち
対象: Dodge Ram IV (2009) (モデルイヤー 2026)
出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)、国土交通省(日本、公共データ利用規約1.0)、韓国国土交通部(car.go.kr)。