Small creases on the underside of the fuel tank may fatigue and crack resulting in a fuel leak. If the leak is undetected and there is an external source of ignition, a fire could result. Correction: Vehicles will be inspected and fuel tanks replaced as required.
On vehicles with 2.0l engines, the fuel feed and return hose assemblies may have been manufactured with improperly crimped fittings.A hose assembly with this condition may crack or separate from the fittng, allowing fuel to leak in the underhood area. This could result in an underhood fire. Correction:Hose assemblies will be replaced.
Cavalier and sunbird with 2l engines the engine air cleaner plastic trim cover may become detached from the air cleaner assembly and fall forward on the exhaust manifold. Should this occur while the engine is being operated, an engine compartment fire could occur without prior warning.
Under certaain conditions, the hose clamps on the fuel tank filler pipe and fuel tank filler vent pipe could fracture. The fracture of these clamps could cause fuel leakage at any of the four pipe to hose connections. Leakage can occur during refueling, or while driving, if the fuel tank is above 3/4 full.
On vehicles with 4 cylinder engines, water may freeze in the accelerator control cable conduit during cold weather. This would cause high accelerator pedal effort or cable binding which in turn could result in the throttle not returning to idle when the accelerator pedal is released. If this were to happen while the vehicle was in motion, a vehicle crash could occur. Correction: Accelerator control cable assembly will be replaced on affected vehicles.
Vehicle description: Passenger vehicles. During very cold weather, water thatn enters the accelerator control cable conduit freezes and causes the accelerator cable to develop a high effort or binding condition.
On vehicles equipped with four cylinder engines, the accelerator cable may have been kinked on vehicle assembly. This may result in a high accelerator pedal effort, a sticking cable or a broken cable. Accelerator cable sticking or breakage could cause loss of throttle control with the risk of vehicle crash. Correction: Accelerator control cable assemblies will be inspected and replaced if necessary.
The accelerator cable may have been kinked during vehicle assembly. The kink in the cable can cause either a high effort accelerator cable, sticking accelerator cable, or a broken accelerator cable.
出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)、国土交通省(日本、公共データ利用規約1.0)、韓国国土交通部(car.go.kr)。