The short section of high pressure fuel hose between the fuel rail and the fuel pressure regulator, which runs alongside the intake manifold, may be subject to hardening. In the event that this line does harden, fuel leaks could develop between the hose and metal pipe fittings. Leaking fuel could ignite on the hot exhaust system and lead to an engine compartment fire. Correction: Fuel hose will be replaced on 924s, 944 and 944 turbo vehicles and the fuel hose and fuel rail will be replaced on 944s vehicles.
The hose material used in the short section of the high pressure fuel line hose, between the fuel rail and fuel pressure regulator, is subject to hardening, and could cause fuel leaks between the hose and the metal pipe fittings.
The protective sleeve covering of the return fuel hose between the pressure regulator and fuel return pipe was shortened leaving part of the hose exposed. In some instances this part of the hose becomes kinked due to the engine compartment heat and/or the routing of the hose. Consequence of defect: If this occurs it could restrict and damage the return fuel hose which could lead to fuel leakage and cause an engine compartment fire.
Fuel hose may be damaged due to too much pressure in crimping the hose end fitting. Consequence of defect: A fuel leak could develop which could cause a loss in system pressure and engine stalling. Also, fuel vapors in the engine compartment could be ignited by a spark and cause a fire.
The fuel supply hose to the pressure damper in the engine compartment may develop a leak between the flex hose and the threaded connector due to improper crimping of the fitting. This will cause the fuel pressure in the injection system to drop, resulting in engine stalling. A stalled vehicle could pose a threat to traffic safety.
出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)、国土交通省(日本、公共データ利用規約1.0)、韓国国土交通部(car.go.kr)。