閲覧無料 · 投稿は無料アカウントでAnticars(2000年)の後継

Toyota ヴィッツ

1999–2019 · 3 世代 · 不具合52件 · 6市場
世代
年式
ヴィッツ III · 2010–2019
リコール重大エンジンEU

The fuel-delivery resin spacer between the fuel injector and the engine's cylinder head does not have the…

The fuel-delivery resin spacer between the fuel injector and the engine's cylinder head does not have the appropriate thermal resistance. Consequently, it could deform, reducing the injector's head sealing, resulting in fuel leakage and increasing the risk of fire.

Safety Gate · EU2020年2月6日A12/00194/20モデルイヤー 2017–2018原文(英語)で表示中 · 翻訳待ち詳細を見る →
ヴィッツ III · 2010–2019
リコール重大エンジンJP

燃料ホース/パイプ

スーパーチャージャ搭載車両において、燃料配管(デリバリパイプ)を取付ける樹脂製スペーサの材質が不適切なため、熱等によりスペーサが変形して取付ボルトが緩み、エンジン振動等により当該ボルトが折損することがある。そのため、インジェクタ取付部がシール不良となり燃料が漏れ、最悪の場合、火災に至るおそれがある。

国土交通省 · 日本2020年1月29日1229770モデルイヤー 2017–2018詳細を見る →
ヴィッツ II · 2005–2010ヴィッツ III · 2010–2019
リコール重大エンジンEU

null Due to insufficient air flow efficiency in the intake system, oil may accumulate in the intercooler

null Due to insufficient air flow efficiency in the intake system, oil may accumulate in the intercooler. Under certain driving conditions, the oil may flow into the combustion chamber and might cause engine damage, which may increase the risk of a fire in the engine compartment due to leaked oil.

Safety Gate · EU2014年11月28日A12/1918/14モデルイヤー 2008–2014原文(英語)で表示中 · 翻訳待ち詳細を見る →
ヴィッツ II · 2005–2010
リコール中程度エンジンJP

排ガス減少装置

排気ガス再循環装置(EGR)のパイプの強度が不足しているため、排気ガスの熱によるパイプの伸縮により、当該パイプに亀裂が発生し異音とともに排気ガスが漏れることがある。また、そのままの状態で使用を続けると、亀裂が進行して折損し、最悪の場合、排出ガスが基準値を満足しなくなるおそれがある。

国土交通省 · 日本2009年1月28日1122442モデルイヤー 2005–2008詳細を見る →
ヴィッツ I · 1999–2004ヴィッツ II · 2005–2010
リコール中程度エンジンJP

燃料ポンプ

電動式燃料ポンプの内部モータの隣接するコイル線が干渉しているため、燃料中の微小異物とモータの振動によりコイル線の被覆が摩耗することがある。そのため、そのまま使用を続けると、コイル線の被覆が損傷して短絡し、燃料ポンプが作動しなくなり、エンジンが停止して再始動できなくなるおそれがある。

国土交通省 · 日本2007年10月17日1119520モデルイヤー 2003–2005詳細を見る →
ヴィッツ I · 1999–2004
リコール中程度エンジンNA

Engine and engine cooling

On certain passenger vehicles, due to improper molding of the resin body of the crankshaft position senor installed on the engine block, engine oil may penetrate the seal and enter the sensor wiring connector. The wire harness connector may not be sufficiently attached to the locking tab of the sensor wiring connector.

NHTSA · 米国2006年7月19日06V266000モデルイヤー 2001–2002原文(英語)で表示中 · 翻訳待ち詳細を見る →
ヴィッツ I · 1999–2004
リコール中程度エンジンNA

Engine

On certain vehicles, improper manufacturing of the Crankshaft Position Sensor body could cause engine oil to penetrate the seal and enter the sensor wiring connector. In addition, the wire harness connector may not be sufficiently attached to the locking tab of the sensor wiring connector. Engine oil inside the sensor wiring connector could cause expansion due to the heat of the engine and could deform the sensor wiring connector. In the worst case, the connector may become disconnected, which could cause the engine to stall while driving and not be able to be restarted. Correction: Dealers will replace the Crankshaft Position Sensor.

カナダ運輸省2006年7月18日2006181モデルイヤー 2001–2002原文(英語)で表示中 · 翻訳待ち詳細を見る →
ヴィッツ I · 1999–2004
リコール中程度エンジンNA

Engine and engine cooling:Engine:Gasoline

Vehicle description: Passenger vehicles originally sold or currently registered in the states of alaska, colorado, idaho, illinois, iowa, kansas, maine, michigan, minnesota, montana, nebraska, nevada, new hampshire, new york, north dakota, south dakota, vermont, wisconsin, and wyoming. Condensed moisture from the positive crankcase ventilation (pcv) port could seep toward the brake vacuum port inside the intake manifold and start to freeze.

NHTSA · 米国2000年9月7日00V256000モデルイヤー 2000原文(英語)で表示中 · 翻訳待ち詳細を見る →

出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)、国土交通省(日本、公共データ利用規約1.0)、韓国国土交通部(car.go.kr)。