원문(영어)으로 표시 중 · 번역 대기
16명의 미국 소유주가 이 차량의 차체 및 구조 문제를 NHTSA에 신고했으며(2001~2004년형), 대체로 약 97,000마일 시점에서 발생했습니다. 가장 많이 지목된 항목은 차체(50%)와 프레임 및 부재:하부 보호판(31%)입니다.
What owners describe
“Passenger side rear sub-frame crack observed . Vehicle has never been in any accident or collision. It's a commonly know problem about BMW 3 series made between 1999 to 2006 that happens naturally without cause due to manufacture issue, so I decided to look under my car to look for any cracks as described. I identified at least one crack. After calling BMW USA for assitance, I was instructed to…” (2004 model)
“Rear subframe support is separating from the body where it mounts to. Cracks around the subframe bolts can be seen. Pinchweld around rear fender is seperating.” (2003 model, 180,000 miles)
“Upon inspection, vehicle's rear subframe mounting points show cracking and other signs of structural fatigue consistent with other similar vehicles that have undergone complete rear subframe failure. Vehicle's subframe needs to be reinforced and bmw settled in a class action suit regarding the issue, however, the issue was not escalated to a recall, possibly leaving thousands of unsafe vehicles on the road.” (2002 model, 190,000 miles)
About these figures
Complaints are filed by owners with the US safety agency NHTSA and are not verified by it. They show where owners run into problems, not how often the problem occurs. If you know the cause or the repair, please add it.