공지
A faulty electric auxiliary heater may have been installed in the certain vehicles. This could result in the failure of the electric auxiliary heater, utilized for the vehicle interior.
🔔 무료 계정을 만들고 BMW iX (모든 세대) 이메일 알림 받기
기술 서비스 공지(TSB)는 제조사가 알려진 문제에 대해 딜러에게 보내는 수리 지침입니다. 안전 리콜은 아니지만 결함을 확인해 주는 경우가 많습니다.
A faulty electric auxiliary heater may have been installed in the certain vehicles. This could result in the failure of the electric auxiliary heater, utilized for the vehicle interior.
When driving over an uneven road surface, a thumping noise can be heard from the front axle. Seeattached video V 31 01 26. Under certain weather conditions, a groaning noise may be heard during steering movements
In some situations, an emergency call may be triggered in the vehicle without either the customer pressing the SOS Call button, or an airbag deployment event. In some cases, the customer may not even be inside the vehicle.
When the steering column is adjusted inwards towards the instrument cluster, the noise may occur near thelimit position.
The lane steering assistance feature will not activate; or deactivation occurs prematurely while activated.The FRSF front radar may also have an additional fault code stored- 7E01AA FRSF lack of visibility .
A check control (CC) message (Steering behavior. Drive moderately. Have it checked by the nearest service partner.) will light up and there will be a noticeable reduction in power steering assistance when parking.
When navigation is selected, only the start animation with the text Starting navigation system... isdisplayed. The Navigation application does not start. This only applies to vehicles where Navigation hasbeen enabled and has been verified to work previously.
This is an informational bulletin regarding Plug & Charge function complaint diagnosis. Possible customer complaints: Plug & Charge menu does not appear in the vehicle, function not available Problems with the configuration, for example: Contracts cannot be installed Fault / problems when attempting charging with Plug & Charge Plug & Charge contract disappeared Plug & Charge payment method expired
A check control (CC) message (Steering behavior. Drive moderately. Have it checked by the nearest service partner.) will light up and there will be a noticeable reduction in power steering assistance when parking.
There is coolant leaking from under the car Low heater output Possible Check Control message Drive, you can continue driving (ID49) Possible fault codes stored in these BEV vehicles: 224163 Electric auxiliary heater for the high-voltage battery unit: Undervoltage or internalcommunication fault 8049AA - Coolant level sensor, expansion tank: Coolant level low or short circuit to ground or linedisconnection 80124F Electric auxiliary heater: Communication in electric auxiliary heater faulty 224F60 - Coolant level sensor, expansion tank: Coolant level low or short circuit to ground or linedisconnection 224111 - Cooling system for power electronics: Coolant loss detected 224107 - Cooling system for high-voltage battery unit, component protection: Detection of coolantloss
When the brake pedal is pressed/ released, a creaking noise may be heard from the pedal area for the Integrated Brake System (IB). This noise may be present with the vehicle stationary and the engine running.
After replacement of the Integrated Braking system (IB)/Power Brake the total distance covered might be lower than when handed over to the workshop for the repair.
Rumbling, groaning type noises from the EPS when the steering wheel is at the end stops.
A manufacturing defect in high-voltage cells of the high-voltage battery can result in electrolyte leakage which might result in a conductive connection with surrounding components. Depending on the contact resistance, a yellow or red Check Control message will then be displayed; it is permitted for you to continue driving, but this will result in a charging interruption during charging.
BMW Remote Software Upgrade (RSU) is not possible. The Remote Software Upgrade menu shows thefollowing text: A remote software upgrade and the activation of functions are not possible. Please contact your servicepartner to restore functionality. Additionally, certain purchased BMW ConnectedDrive Upgrades that require RSU for installation cannot be activated. After the purchase, the status of the upgrade displayed the CID remains In Activation.
After establishing a drive-ready state, the steering column remains in the comfort entry position and sporadically does not return to the saved user setting.
The saved steering column positions, vertical and horizontal, are not stored long term. Over time the Body Central Platform (BCP) loses steering column Last User Position.
RSU availability. It is possible the State of Health (SoH) of the high-voltage (HV) battery is displayed incorrectly to the customer. The value is continuously displayed as 100% regardless of the actual ageing of the HV battery.
There are two possible situations: When opening either the front and/or rear door, the door window glass does not lower (short drop). When closing either the front and/or rear door, the door window glass does not roll up into the seal but rests outsidethe seal.
While driving on a smooth and/or uneven road, a clicking sound is heard from the drivers footwell area.
Various concerns about the third row of seats.
During workshop repairs with software updates, certain customer vehicles may be changed to BMW Operating System 8.5, and returned to customers without making them aware of the change.
When driving on rough roads, a "cracking" sound can be heard coming from the D-pillar trim panel. The noise can occur on both left and right-side panels.
While driving on smooth roads, a cracking sound can be heard from the rear safety belt feed trim panel. This sound will ONLY occur on the right-side panel.
출처: NHTSA(미국, 퍼블릭 도메인), 캐나다 교통부(Open Government Licence – Canada), DVSA(영국, Open Government Licence v3.0), RappelConso 및 EU Safety Gate(프랑스, Licence Ouverte 2.0), 일본 국토교통성(공공데이터 이용약관 1.0), 한국 국토교통부(자동차리콜센터 car.go.kr).