차량 및 트레일러 - 전기 설비
다른 무게가 키링에 매달려 있는 경우, 그리고 차량이 도로를 벗어나거나 주행 중 충격을 받으면 키가 의도치 않게 '회전(ON)' 위치에서 벗어날 수 있습니다.
🔔 무료 계정을 만들고 Chevrolet 임팔라 (모든 세대) 이메일 알림 받기
다른 무게가 키링에 매달려 있는 경우, 그리고 차량이 도로를 벗어나거나 주행 중 충격을 받으면 키가 의도치 않게 '회전(ON)' 위치에서 벗어날 수 있습니다.
Gm is recalling certain model year 2009-2010 chevrolet impalas for failing to comply with the requirements of federal motor vehicle safety standard no. 210, "seat belt assembly anchorages." the front safety belt webbing may not have been properly secured to the lap belt anchor pretensioner mounted to the side of the seat nearest the door.
Gm is recalling 79 my 2009 chevrolet impala vehicles. Some of these vehicles have a passenger-side front air bag inflator that could fracture at an inflator tube during a deployment.
On certain mini vans, passenger and sport utility vehicles, some of these vehicles have a driver's side air bag that may not deploy as designed. In addition, the air bag inflator could rupture.
특정 승용차, 미니밴 및 스포츠 유틸리티 차량(SUV)의 운전석 에어백 인플레이터가 전개 시 용접부에서 파열될 수 있습니다.
Vehicle description: Passenger vehicles. Some of these vehicles exhibit a condition in which the driver side impact air bag inflator separates from the air bag module during deployment.
Vehicle description: Passenger vehicles. The air bag sensing and diagnostic modules (sdm) could experience a memory error resulting in the air bags not deploying in a crash situation.
General Motors LLC(GM)는 2008년 4월 25일부터 2010년 2월 16일까지 제작된 특정 2009~2010년식 Chevrolet Impala 차량을 리콜합니다. 앞좌석 조수석 프레임이 승객 감지 센서 모듈의 배선에 닿아 손상시킬 수 있습니다.
General Motors LLC(GM)는 2013년 4월 15일부터 2015년 6월 19일 사이에 제조된 전면 통풍·난방 승객석이 장착된 2014~2015년식 Chevrolet Impala 일부 차량을 리콜하고 있습니다. 이에 따라 전방 승객석에 아동용 카시트가 설치된 경우 자동 승员 감지(AOS) 시스템이 전방 승객 에어백을 억제하지 못할 수 있습니다. 해당 차량은 연방 자동차 안전 기준(FMVSS) No. 208, "Occupant Crash Protection(승员 충돌 보호)"의 요건을 준수하지 않습니다.
General Motors LLC (GM) is recalling certain model year 2013-2014 Cadillac XTS vehicles manufactured April 11, 2013, to June 27, 2013, and 2014 Chevrolet Impala vehicles manufactured May 13, 2013, to November 5, 2013. The affected vehicles may have left the factory with the sensing and diagnostic module (SDM) set to "manufacturing mode."
Certain vehicles equipped with a manual passenger seat adjuster fail to comply with the requirements of federal motor vehicle safety standard no. 210, "seat belt assembly anchorages." the left floor mounting bracket may be mislocated.
Vehicle description: Passenger vehicles, light duty trucks, sport utility vehicles, and mini vans equipped with trw seat belt buckle assemblies. The buckle base of these seat belt assemblies were not properly heat treated and therefore do not pass the load bearing requirement of federal motor vehicle safety standard no. 209, "seat belt assemblies."
출처: NHTSA(미국, 퍼블릭 도메인), 캐나다 교통부(Open Government Licence – Canada), DVSA(영국, Open Government Licence v3.0), RappelConso 및 EU Safety Gate(프랑스, Licence Ouverte 2.0), 일본 국토교통성(공공데이터 이용약관 1.0), 한국 국토교통부(자동차리콜센터 car.go.kr).