195 owners in the United States reported problems with the airbags of this car to NHTSA (model years 2001–2005), typically at around 60,000 miles. Most often named: frontal (21%). Reported consequences: 52 crashes, 4 fires, 46 injuries.
✓ 공식 데이터에 대한 Mecafile 분석2001–2005원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
136 owners in the United States reported problems with the electrical system of this car to NHTSA (model years 2001–2005), typically at around 72,000 miles. Reported consequences: 4 crashes, 10 fires, 2 injuries, 2 deaths.
✓ 공식 데이터에 대한 Mecafile 분석2001–2005원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
80 owners in the United States reported problems with the steering of this car to NHTSA (model years 2001–2005), typically at around 74,000 miles. Reported consequences: 7 crashes, 1 fire, 5 injuries, 1 death.
✓ 공식 데이터에 대한 Mecafile 분석2001–2005원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
On certain two-door coupe vehicles, in the event of a collision that warrants a deployment of the front passenger airbag, the deploying airbag could strike the passenger sun visor if it is in the down position. This could cause the sun visor to detach from its mounting bracket, potentially contacting an occupant, which would increase the risk of injury. Correction: Dealers will add a tether strap to the passenger sun visor. Note: This is an expansion of recall 2015267.
캐나다 교통부2016년 6월 29일2016338연식 2001원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
Mitsubishi Motors North America, Inc. (MMNA) is recalling certain model year 2001-2002 Chrysler Sebring and Dodge Stratus vehicles, equipped with beige interiors. The affected vehicles were previously repaired for a recall issue using an incorrect part. The incorrect part may not prevent the passenger side sun visor from detaching if the passenger frontal air bag deploys and the passenger side sun visor is folded down in a certain position.
NHTSA · 미국2016년 6월 3일16V401000연식 2001–2002원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
null If the airbag deploys, a folded-down sun visor on the front passenger side may, depending on the angle, be torn from its mounting and propelled in the direction of the front passenger seat.
Safety Gate · EU2016년 4월 26일A12/0531/16연식 2001–2005원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
NHTSA · 제조사 공지10220840연식 2005원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
출처: NHTSA(미국, 퍼블릭 도메인), 캐나다 교통부(Open Government Licence – Canada), DVSA(영국, Open Government Licence v3.0), RappelConso 및 EU Safety Gate(프랑스, Licence Ouverte 2.0).