Electrical system
On certain sport utility vehicles equipped with front bench seats only, if fluid is spilled from the floor mounted cup holder, an unused console power outlet connector located under the seat may become contaminated.
🔔 무료 계정을 만들고 Dodge 듀랑고 I 이메일 알림 받기
On certain sport utility vehicles equipped with front bench seats only, if fluid is spilled from the floor mounted cup holder, an unused console power outlet connector located under the seat may become contaminated.
On certain sport utility vehicles and pickup trucks equipped with four-wheel drive (4x4), if moisture leaks into the front suspension upper ball joint, evacuation of the lubricant and corrosion of the joint may cause the joint to wear over an extended period of time. This could cause a clunking noise in the front suspension, which may not always be heard by the vehicle occupants.
Vehicle description: Pickup trucks. Sound deadener material inside the steering wheel could become detached from the cover and housing. Note: The ram pickup trucks were built at the warren assembly plant ("s" in the 11th vin position) from may 16, 2000 through october 23, 2000; st. Louis north assembly plant ("j" in the 11th vin position) from may 19, 2000 through october 23, 2000; lago alberto assembly plant ("m" in the 11th vin position) from may 23, 2000 through october 23, 2000; and saltillo assembly plant ("g" in the 11th vin position) from may 23, 2000 through october 23, 2000. Important: Vehicles that have already had the proper clockspring installed, according to warranty records, have been excluded from this recall. In addition, 1997-2000 model year vehicles that have had a suspect replacement clockspring installed, according to warranty records, have been added to this recall.
Vehicle description: Certain van, wagon, pickup trucks, passenger and sport utility vehicles, fail to comply with requirements of fmvss no. 209, "seat belt assemblies." the front seat belt retractor may not comply with the requirements of the standard.
Vehicle description: Sport utility vehicles. The fuel tank strap can separate due to fatigue during operation. If this occurs, the tank will be unsupported, increasing the risk of a fuel leak.
The fasteners which secure the alternator cable to the power distribution center (pdc) may have insufficient clamp load. Insufficient clamping may result in a loose connection and arcing at the connection, which could potentially cause a fire in the engine compartment. Correction: The alternator and battery cable attaching nuts will be torqued at the pdc to the proper specifications.
Vehicle description: Light duty pickup trucks. The fastener which secures the generator cable to the power distribution center (pdc) has an insufficient clamp load, resulting in a loose connection and electrical arcing at the connection.
On certain van and pickup trucks equipped with automatic transmissions, the ignition/park shift interlock system may become inoperative. This can allow the shifter to be moved out of the "park" position with the ignition key removed (or in the "lock" position). This can also allow the ignition key to be removed when the shifter has not been placed in the "park" position.
특정 픽업트럭 및 스포츠 유틸리티 차량(SUV)에서는 와이퍼 모듈 모터에 수분이 유입되어 내부 부식이 발생할 수 있으며, 이로 인해 전면 유리 와이퍼 기능이 부분적으로 또는 완전히 상실될 수 있습니다.
Vehicle description: Light duty trucks and sport utility vehicles equipped with 4-wheel drive. The electric shift transfer case may not fully engage into gear when the operator moves the transfer case selector switch.
On certain vehicles, the rear brake tube may contact an underbody crossmember during normal vehicle operation and eventually wear a hole in the tube. If the tube becomes perforated, a reduction in braking will occur at the rear wheels, increasing stopping distances and increasing the risk of a vehicle crash without prior warning. Correction: Vehicles will be inspected and a rubber isolator will be installed on the brake tube. Those vehicles exhibiting contact that have more than 75,000km will have the brake tube replaced with the production tube and isolator.
On certain vehicles, the fuel tank strap may separate due to high stress concentration at the double toggle lock upset area. Fuel tank strap separation could result in the fuel tank contacting the road surface or, on vehicles equipped with a fuel tank skid plate, the tank may contact the skid plate and wear at the point of contact. Either condition could result in fuel tank leakage. Correction: Double toggle lock fuel tank straps will be replaced with the single toggle lock design.
Vehicle description: Sport utility vehicles. The rear brake tube can contact an underbody crossmember eventually wearing a hole in the tube.
Vehicle description: Certain passenger vehicles, pickup trucks and sport utility vehicles fail to comply with the requirements of fmvss no. 225, "child restraint anchorage systems." some of the owner's manuals for these vehicles are missing instructions that provide a step-by-step procedure, including diagrams, for properly attaching a child restraint system's tether strap to the tether anchorage.
출처: NHTSA(미국, 퍼블릭 도메인), 캐나다 교통부(Open Government Licence – Canada), DVSA(영국, Open Government Licence v3.0), RappelConso 및 EU Safety Gate(프랑스, Licence Ouverte 2.0), 일본 국토교통성(공공데이터 이용약관 1.0), 한국 국토교통부(자동차리콜센터 car.go.kr).