이 파일은 Lexus LX IV의 알려진 결함을 커뮤니티가 출처와 함께 정리한 것입니다. 누구나 무료로 읽을 수 있고, 무료 계정으로 기여할 수 있습니다. 신뢰할 수 있는 기여자가 충분히 검증하면 결함에 인증 마크가 붙습니다.
가장 심각한 결함
이 조건에 해당하는 결함이 아직 없습니다.
리콜보통엔진NA
Issue: On certain vehicles, the engine may not have been manufactured properly. As a result, metal debris could cause the crankshaft bearings to fail. If this happens, the engine may run rough or may not start. This could also cause the engine to stall while driving. Note: This recall only affects certain vehicles equipped with a 3.4L twin-turbo engine. This recall replaces Transport Canada recall No. 2025-614. Safety Risk: A sudden loss of power to the wheels could increase the risk of a crash. Corrective Actions: The company will notify owners by mail and advise you to take your vehicle to a dealership to inspect the No. 1 main bearing for abnormal wear and, if necessary, replace the engine.
리콜심각실내NA
Issue: On certain vehicles, the front passenger seat occupant classification system (OCS) may not work properly due to interference between seat components. As a result, the airbag system can turn off the passenger-front airbag even when a passenger is seated. Safety Risk: An airbag system that does not work properly could increase the risk of injury in a crash. Corrective Actions: To reduce the safety risk, Lexus recommends that you shouldn't transport a passenger in the front passenger seat until the recall repairs have been completed. Lexus will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the front passenger seat frame assembly.
리콜보통실내NA
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2024 Lexus LX vehicles. The front passenger seat may have insufficient clearance between the seat frame and the stopper that can cause the Occupant Classification System (OCS) sensor to incorrectly detect the occupant. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant Crash Protection."
공지보통서스펜션NA
Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: Careful inspection for paint chips/scratches and body dents/dings. Proper operation of electrical accessories (including interior light, clock, and radio reset). Interior cleanliness. Proper function of mechanical systems. The PDS process helps identify potential vehicle concerns before customer delivery. After completing the PDS process, maintain accurate PDS records by ensuring the required documents listed below are completed and recorded in accordance with Lexus Warranty Policy. GTS+ Health Check Completed PDS Check Sheet Battery Charge Test Print Out GTS+ Tire Pressure Information Customer retention and proper maintenance of vehicles are and have always been a major focus for Lexus. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. This bulletin contains the PDS procedures that apply specifically to 2027 model year LX 600 and LX 700h vehicles.
공지경미전장NA
보관된 차량의 배터리는 성능과 수명을 저하시킬 수 있는 조건에 노출될 수 있습니다. 이러한 조건에는 저장 기간, 온도, 기생충 소모, 배터리 부하 등이 포함됩니다. 이러한 요인들로 인해 적절한 작동과 최적의 배터리 수명을 보장하기 위해 배터리 점검과 유지보수가 필요합니다.
공지경미서스펜션NA
제조 과정 중에는 타이어가 차량에 매칭된 세트로 장착되어 당기거나 드리프트 같은 상황을 줄이도록 돕습니다. 차량 인도 전에 바퀴를 교체하거나 재마감할 경우, 타이어가 차량에 같은 위치와 회전 방향으로 유지되는 것이 중요합니다.
출처: NHTSA(미국, 퍼블릭 도메인), 캐나다 교통부(Open Government Licence – Canada), DVSA(영국, Open Government Licence v3.0), RappelConso 및 EU Safety Gate(프랑스, Licence Ouverte 2.0).