에어백:전면:조수석 측:인플레이터 모듈
Mazda North American Operations(Mazda)는 이전 리콜에 따라 교체용 전방 조수석 에어백 인플레이터를 장착받은 일부 2004~2006년형 B-Series 차량을 리콜합니다. 교체된 전방 조수석 에어백 인플레이터가 잘못 장착되었을 수 있습니다.
🔔 무료 계정을 만들고 Mazda B-Series (모든 세대) 이메일 알림 받기
Mazda North American Operations(Mazda)는 이전 리콜에 따라 교체용 전방 조수석 에어백 인플레이터를 장착받은 일부 2004~2006년형 B-Series 차량을 리콜합니다. 교체된 전방 조수석 에어백 인플레이터가 잘못 장착되었을 수 있습니다.
마쓰다 북미법인(Mazda North American Operations, Mazda)은 2007~2009년식 일부 B-Series 픽업트럭을 리콜합니다. 장기간 높은 절대 습도, 고온, 그리고 반복적인 고온 노출에 따른 추진제 열화로 인해 운전석 에어백 인플레이터가 폭발할 수 있습니다.
에어백 인플레이터에 사용되는 질산암모늄 추진제는 장기간 높은 절대 습도, 고온, 그리고 고온 사이클에 노출되면서 발생하는 열화로 인해 시간이 지남에 따라 재질이 변질될 수 있습니다. 에어백이 전개될 때 추진제가 불규칙하게 연소하거나 너무 느리게 전개될 수 있으며, 내부 압력이 지나치게 높아지면 인플레이터 본체가 파열되어 금속 파편이 에어백 쿠션 소재를 관통해 탑승자에게 부상을 입힐 수 있습니다.
운전석 에어백 추진제에 수분이 흡수되면 에어백 전개가 느려지거나 인플레이터가 파열될 수 있습니다.
운전자석용 에어백 인플레이터(팽창장치)에서 흡습 방지가 부적절하여 가스 발생제가 습기를 흡수하는 경우가 있다. 이 때문에 사용 과정에서 가스 발생제가 흡습과 건조를 반복하는 경우 등에는 에어백 작동 시 정상적으로 전개되지 않을 우려가 있다.
Mazda is recalling certain 2006 B-series vehicles. Mazda requests owners NOT TO DRIVE these vehicles until they have been remedied. Upon deployment of the driver side frontal air bag, excessive internal pressure may cause the inflator to explode. On January 11, 2018, Mazda North American Operations (Mazda) notified NHTSA that they are recalling 160 model year 2006 B-Series vehicles built with driver-side air bags. As of February 9, 2018, Mazda is expanding the recall to a total of 2,205 model year 2006 B-Series vehicles built with driver-side air bags. Upon deployment of the driver side frontal air bag, excessive internal pressure may cause the inflator to explode.
Mazda North America Operations (Mazda) is recalling certain 2006 B-Series vehicles. Mazda is requesting owners to NOT DRIVE these vehicles until they have been remedied. Upon deployment of the passenger side frontal air bag, excessive internal pressure may cause the inflator to explode. On January 11, 2018, Mazda North American Operations (Mazda) notified NHTSA that they are recalling 160 model year 2006 B-Series vehicles built with driver-side air bags. As of February 9, 2018, Mazda is expanding the recall to a total of 2,205 model year 2006 B-Series vehicles built with driver-side air bags. Upon deployment of the driver side frontal air bag, excessive internal pressure may cause the inflator to explode.
Mazda North American Operations (Mazda) is recalling certain 2004-2006 B-Series trucks. Upon deployment of the driver side frontal air bag, excessive internal pressure may cause the inflator to rupture.
Mazda North American Operations (Mazda) is recalling certain 2004-2006 Mazda B-series trucks. Upon deployment of the passenger side frontal air bag, excessive internal pressure may cause the inflator to rupture.
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag inflator. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected. Note: This recall is superseded by recall 2018039 (Mazda Recall 2118A). Please see <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2018039">recall 2018039</a> for more information.
Mazda North America Operations (Mazda) is recalling certain 2007-2009 B-Series trucks sold, or ever registered, in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Additionally, unless included in "Zone B" above, Mazda is recalling certain 2007-2008 B-Series trucks sold, or ever registered, in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
점화 스위치의 접점 사이에 탄화된 그리스가 쌓여 스위치 내부의 절연 성능을 저하시킬 수 있습니다. 이러한 상태에서는 스위치가 열을 발생시켜 연기가 나고, 최악의 경우 화재로 이어질 수 있습니다.
Mazda North American Operations (Mazda) is recalling certain model year 2007-2009 B-Series trucks manufactured June 6, 2006, to January 22, 2009, originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Mazda is recalling certain model year 2007-2008 B-Series trucks manufactured February 21, 2006, to April 28, 2008, originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Any vehicle not included in "Zone A", or "Zone B" is not included in this safety recall. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will replace the front driver airbag inflator. Note: This recall is superseded by recall 2018467 (Mazda Recall 1917L). <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2018467">Please see recall 2018467 for more information</a>.
On certain vehicles, the passenger frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will replace airbag inflators. Note: This recall is superseded by recall 2018466 (Mazda Recall 1817L). <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2018466">Please see recall 2018466 for more information</a>.
On certain vehicles, the speed control deactivation switch may overheat, smoke, or burn, potentially resulting in an underhood fire. The condition may occur either when the vehicle is parked or when it is in operation. Correction: Dealers will install a new switch or fused wiring harness. Note: This is an expansion of recall 2007263 (4707H) for vehicles not previously included in the campaign.
Mazda is recalling model year 1995 through 1997 and model year 2001 through 2003 trucks equipped with texas instruments speed control deactivation switch (scds) and/or anti-lock brake system (abs) and manufactured on or before december 5, 2002. A component of the cruise control deactivation switch may deteriorate over time and develop a leak. This occurrence could cause the switch to overheat, smoke or burn which could result in an under hood fire.
On certain trucks equipped with a speed control system, the speed control deactivation switch may, under certain conditions, leak internally and then overheat, smoke, or burn.
プレッシャーレギュレータ(燃料圧力調整装置)用の負圧ホースの取り回しが不適切な ため、走行中にインテークマニホールド内で発生した水滴が負圧ホースからプレッシャー レギュレータ内に浸入することがある。そのため、極低温下でエンジンを停止した場合、 浸入した水滴が凍結してプレッシャーレギュレータが作動しなくなり、最悪の場合、エン ジンを始動するとフューエルホースとフューエルパイプの接合部から燃料が漏れるおそれ がある。
Certain pickup trucks equipped with seat belts supplied by TRW. It is possible that the driver's and/or front passenger's outboard seat belt buckle may not fully latch. In the event of a crash, the restraint system may not provide adequate occupant protection, increasing the risk of personal injury to the seat occupant. Correction: Dealers will inspect the front outboard seat belt buckles and if the buckle fails the inspection process, it will be replaced.
The flexible section of the chassis mounted fuel line could contact the exhaust manifold. This could result in damage to the fuel line and a possible fuel leak. Fuel leakage, in the presence of an ignition source, could result in a fire. Correction: An additional clip will be installed to hold the fuel line in the intended design position.
Vehicle description: Light duty 4x2 and 4x4 pickup trucks equipped with 4.0l engines. The flexible section of the chassis mounted fuel line that connects to the engine was routed too close to the exhaust manifold. The line could contact the manifold.
The flexible portion of the front fuel hoses on these vehicles may be susceptible to cracking. Cracked fuel lines could cause fuel leakage, and, in the presence of an ignition source, a fire could result. Correction: Front fuel lines will be inspected and, if necessary, replaced.
The front fuel lines have a section of flexible hose that is susceptible to cracking which can allow fuel leakage.
On certain trucks and sport utility vehicles, the windshield wiper motor may have been produced without grease applied to the output shaft gear.
출처: NHTSA(미국, 퍼블릭 도메인), 캐나다 교통부(Open Government Licence – Canada), DVSA(영국, Open Government Licence v3.0), RappelConso 및 EU Safety Gate(프랑스, Licence Ouverte 2.0), 일본 국토교통성(공공데이터 이용약관 1.0), 한국 국토교통부(자동차리콜센터 car.go.kr).