This bulletin supersedes the previously issued bulletin(s) listed below. The changes are noted in Red text. SA-037/26 05/28/26 DESCRIPTION Replacement battery packs for High Voltage systems are supplied with an additional label that matches the one attached to the service battery pack (refer to the sample High Voltage Battery Label image for reference). When replacing the battery pack in a 2026 or later model that has a similar label at the base of the left B-pillar, replace the label with the new one included in the service parts battery pack. REPAIR PROCEDURE Label Application: When replacing a High Voltage Battery: refer to the Label Application Process included in the "HIGH VOLTAGE BATTERY REMOVAL/INSTALLATION" or "M Hybrid Boost BATTERY REMOVAL/INSTALLATION" procedures in the Workshop Manual for the applicable models.
NHTSA · 제조사 공지11034440연식 2026원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
This service alert supersedes the previously issued service alert listed below. The changes are noted in Red text. SA-047/25 10/07/25 DESCRIPTION When the Telematics Control Unit (TCU) replacement is necessary due to a failure, use MDARS to activate the new TCU after replacement. Use the information in this service alert to initialize the new TCU until the procedure on MGSS is updated. CAUTION: DO NOT swap TCU with another vehicle as the TCU is VIN locked after activation. A TCU swap with another vehicle will disable Connected Services on both vehicles. If TCU activation is not performed, connected vehicle functions will not operate. This will have a negative impact on the customer because they will need to return to the dealer for repairs. If the Telematics Control Unit (TCU) replacement is necessary, check "Vehicle Communication Line Status Reference" status detail first. The TCU can only be replaced under the following "Status Detail" conditions: Open Completed (OK) Closed Completed (OK) If the TCU is replaced under the following "Status Detail" conditions, the customer may not be able to enroll into the replacement TCU. Processing (NG) Request Failed (NG) Open Failed (NG) Flag Setting Failed TCU Activation 1. Install the new TCU.
NHTSA · 제조사 공지11033447연식 2025원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
This bulletin supersedes the previously issued bulletin(s) listed below. The changes are noted in Red text. SA-049/25 10/16/2025 DESCRIPTION Replacement battery packs for High Voltage systems are supplied with an additional label that matches the one attached to the service battery pack (refer to the sample High Voltage Battery Label image for reference). When replacing the battery pack in a 2026 or later model that has a similar label at the base of the left B-pillar, replace the label with the new one included in the service parts battery pack. REPAIR PROCEDURE Label Application: When replacing a High Voltage Battery: refer to the Label Application Process included in the "HIGH VOLTAGE BATTERY REMOVAL/INSTALLATION" or "M Hybrid Boost BATTERY REMOVAL/INSTALLATION" procedures in the Workshop Manual for the applicable models. In addition to the procedures outlined in the Workshop Manual, please follow these additional steps when removing an existing label to help simplify the application of the new one:
NHTSA · 제조사 공지11033443연식 2026원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
HYBRID SYSTEM FAILURE DISPLAYED ON METER WITH DTC P2530:12 This bulletin supersedes the previously issued bulletin(s) listed below. The changes are noted in Red. 30-001/26 02/19/26 and 03/24/26 This technical service bulletin has been superseded to SSPE0. Concern Outline: When starting the vehicle, a Master Warning Light may turn on and a hybrid system failure message (Hybrid System Malfunction Have the Vehicle Inspected) may be displayed in the instrument cluster. The hybrid system may not activate, and the engine may not start, along with the DTC P2530:12 [Hybrid Control] and other numerous DTCs. Repair Outline: Reprogram the PT_GWU with the Mazda Modular Diagnostic System (M-MDS), using Mazda Diagnostic And Repair Software (MDARS) by following TSB 30-001/26 repair instructions.
NHTSA · 제조사 공지11032007연식 2025원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
Subject: Notification of Special Service Program (SSPE0) - 2025 CX-50 Hybrid - Hybrid System Failure Displayed on Instrument Cluster (DTC P2530:12) Dear Mazda Dealer Colleagues, Mazda Motor Corporation has decided to conduct a Special Service Program on certain 2025 CX-50 Hybrid vehicles. Concern Outline: When starting the vehicle, a Master Warning Light may turn on and a hybrid system failure message (Hybrid System Malfunction Have the Vehicle Inspected) may be displayed in the instrument cluster. The hybrid system may not activate, and the engine may not start, along with the DTC P2530:12 [Hybrid Control] and other numerous DTCs. Repair Outline: Reprogram the PT_GWU with the Mazda Modular Diagnostic System (M-MDS), using Mazda Diagnostic And Repair Software (MDARS) by following TSB 30-001/26 repair instructions. ACTION ITEM - STOP DELIVERY: All dealer inventory types: New, Certified Pre-Owned, or Used can be sold but not delivered until repaired. There are approximately 50 new vehicles in dealer stock and/or in transit to dealers. All affected dealer inventory types with this SSP must be repaired prior to delivery. The number of affected units at your dealership can be seen in Inventory & Sales 2.0 in eMDCS and VIN list (via an internal MNAO campaign reporting) will also be provided to your District Service Manager by 5pm (Pacific Time) on March 24, 2026. Owner Notification: Mazda will notify owners of affected vehicles no later than April 24, 2026 or earlier. Vehicles will display in eMDCS as Open on March 24, 2026 and all vehicles can be repaired immediately.
NHTSA · 제조사 공지11030704연식 2025원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
Subject: Notification of Special Service Program (SSPE0) - 2025 CX-50 Hybrid - Hybrid System Failure Displayed on Instrument Cluster (DTC P2530:12) Dear Mazda Dealer Colleagues, Mazda Motor Corporation has decided to conduct a Special Service Program on certain 2025 CX-50 Hybrid vehicles. Concern Outline: When starting the vehicle, a Master Warning Light may turn on and a hybrid system failure message (Hybrid System Malfunction Have the Vehicle Inspected) may be displayed in the instrument cluster. The hybrid system may not activate, and the engine may not start, along with the DTC P2530:12 [Hybrid Control] and other numerous DTCs. Repair Outline: Reprogram the PT_GWU with the Mazda Modular Diagnostic System (M-MDS), using Mazda Diagnostic And Repair Software (MDARS) by following TSB 30-001/26 repair instructions. ACTION ITEM - STOP DELIVERY: All dealer inventory types: New, Certified Pre-Owned, or Used can be sold but not delivered until repaired. There are approximately 50 new vehicles in dealer stock and/or in transit to dealers. All affected dealer inventory types with this SSP must be repaired prior to delivery. The number of affected units at your dealership can be seen in Inventory & Sales 2.0 in eMDCS and VIN list (via an internal MNAO campaign reporting) will also be provided to your District Service Manager by 5pm (Pacific Time) on March 24, 2026. Owner Notification: Mazda will notify owners of affected vehicles no later than April 24, 2026 or earlier. Vehicles will display in eMDCS as Open on March 24, 2026 and all vehicles can be repaired immediately.
NHTSA · 제조사 공지11030703연식 2025원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
Subject: Notification of Special Service Program (SSPE0) - 2025 CX-50 Hybrid - Hybrid System Failure Displayed on Instrument Cluster (DTC P2530:12) Dear Mazda Dealer Colleagues, Mazda Motor Corporation has decided to conduct a Special Service Program on certain 2025 CX-50 Hybrid vehicles. Concern Outline: When starting the vehicle, a Master Warning Light may turn on and a hybrid system failure message (Hybrid System Malfunction Have the Vehicle Inspected) may be displayed in the instrument cluster. The hybrid system may not activate, and the engine may not start, along with the DTC P2530:12 [Hybrid Control] and other numerous DTCs. Repair Outline: Reprogram the PT_GWU with the Mazda Modular Diagnostic System (M-MDS), using Mazda Diagnostic And Repair Software (MDARS) by following TSB 30-001/26 repair instructions. ACTION ITEM - STOP DELIVERY: All dealer inventory types: New, Certified Pre-Owned, or Used can be sold but not delivered until repaired. There are approximately 50 new vehicles in dealer stock and/or in transit to dealers. All affected dealer inventory types with this SSP must be repaired prior to delivery. The number of affected units at your dealership can be seen in Inventory & Sales 2.0 in eMDCS and VIN list (via an internal MNAO campaign reporting) will also be provided to your District Service Manager by 5pm (Pacific Time) on March 24, 2026. Owner Notification: Mazda will notify owners of affected vehicles no later than April 24, 2026 or earlier. Vehicles will display in eMDCS as Open on March 24, 2026 and all vehicles can be repaired immediately.
NHTSA · 제조사 공지11030702연식 2025원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
DESCRIPTION Hybrid system failure displayed on meter with DTC P2530:12. (This TSB has been superseded to SSPE0). REPAIR PROCEDURE 1. Verify the customer concern. 2. Reprogram the PT_GWU with the Mazda Modular Diagnostic System (M-MDS), using Mazda Diagnostic And Repair Software (MDARS). Refer to MDARS ECU Reprogramming Procedure. WARNING: During module reprogramming, the engine cooling fan may turn on and off automatically. Keep hands, tools, and any objects clear of the cooling fan and other moving components in the engine bay during the reprogramming procedure. NOTE: Be sure to submit Diagnostic Information (ODR) data as it is a required item and will be checked during warranty claim submission. Instructions can be found under M-MDS -> MDARS (Uploading Diagnostic Information (ODR) Data). 3. Clear any other DTC. 4. Verify the repair by starting the engine (READY ON) and confirming there is no CHECK ENGINE light ON or abnormal warning lights present.
NHTSA · 제조사 공지11030604연식 2025원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
This bulletin supersedes the previously issued bulletin(s) listed below. The changes are noted in Red. 30-001/25 06/30/25 and 05/15/25 Some customers may experience a hybrid system failure message appearing on the meter and the engine does not start, along with other numerous DTCs. This is caused by improper logic of the Powertrain Gateway Unit. To eliminate this concern, the control software of Powertrain Gateway Unit has been modified.
NHTSA · 제조사 공지11029239연식 2025원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
This bulletin supersedes the previously issued bulletin(s) listed below. The changes are noted in Red. 04-001/25 02/06/25 Some vehicles may experience the front inner brake pads wear out faster than the outside. This accelerated pad wear may be caused by dirt and sand easily adhering to the inner friction surface of the disc while driving. To eliminate this concern, the shape of the dust cover and the front brake pad chamfer shape have been changed.
NHTSA · 제조사 공지11029226연식 2025원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
Some vehicles may exhibit a clunk noise from the rear brakes when starting to drive. This may be caused by the brake pads and the rear disc plates sticking together when the Electric Parking Brake (EPB) is engaged for an extended period while parked. Even after releasing the EPB, the adhesion remains. When the vehicle starts driving in this condition, the initial torque causes the brake pads to detach from the rotors, and the resulting impact is transmitted through the brake system to the vehicle body, resulting in a clunk noise. To eliminate this concern, the shape of the rear brake disc pads has been modified to increase the rigidity and reduce the impact force.
NHTSA · 제조사 공지11021385연식 2025원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
Some customers may experience a hybrid system failure message appearing on the meter and the engine does not start. This is caused by improper logic of the Powertrain Gateway Unit. To eliminate this concern, the control software of Powertrain Gateway Unit has been modified. Customers having this concern should have their vehicle repaired using the following repair procedure.
NHTSA · 제조사 공지11019098연식 2025원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
The new AWD rear differential DOES NOT come with a breather cap on the rear of the differential, therefore a new one will need to be ordered and installed when replacing the differential. NOTE: The breather threads have a sealant and locking compound that prevents it from being reused. Refer to GEPC for the correct part number of the Differential Breather. The instructions on MGSS will be updated soon to include replacing the breather when replacing the differential with a new unit.
NHTSA · 제조사 공지11016235연식 2025원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
Some vehicles may experience the front inner brake pads wear out faster than the outside. For example, the brake pads need to be replaced at less than 12,500 miles (20,000km). This accelerated pad wear may be caused by dirt and sand easily adhering to the inner friction surface of the disc while driving. To eliminate this concern, the shape of the dust cover has been changed and modification of the front brake pads is under study.
NHTSA · 제조사 공지11014796연식 2025원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
Before judging a steering wheel as having premature wear or a defect, first clean the steering wheel as explained in the repair information. Some vehicles may have steering wheel stains caused by chemicals such as hand lotions.
NHTSA · 제조사 공지11013792연식 2025원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
Key Transmitter Power Saving Function: When the key transmitter Power Saving Function is turned ON, transmitter battery power consumption is restricted, thereby extending the transmitter battery life. NOTE: Some customers may complain about an engine no start. This may be caused by the customer inadvertently putting the key transmitter in Power Saving Function.
NHTSA · 제조사 공지11013788연식 2025원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
Some customers may report concerns with interior upholstery surface stains particularly on high contact areas (e.g.: seats, steering wheel, door panels, shifter...etc.). This may be caused by skin oils or chemicals such as hand lotions.
NHTSA · 제조사 공지11011141연식 2025원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
Some customers may experience the audio sound pausing when the engine restarts after i-stop operation under the following situations. The symptoms are caused by an improper part installation in the audio amplifier. A voltage drop error detection of the power source may be too sensitive.
NHTSA · 제조사 공지11011135연식 2023원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
NHTSA · 제조사 공지11009644연식 2025원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
This information will give you the necessary knowledge to respond to customers concerns of Smart Brake Support (SBS) unintended braking. By educating the customer on the system operation, it should reduce their anxiety or distrust of the vehicle.
NHTSA · 제조사 공지11008430연식 2025원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
The Blind Spot Monitoring (BSM) system can malfunction with the following symptoms if the rear side radar sensors are installed facing the wrong direction. BSM system indicates vehicle on the opposite side. i-ACTIVSENSE indicator ring will not turn green Rear Cross Traffic Alert (RCTA) does not work Rear side radar sensor aiming may fail TPMS DTC(s) stored
NHTSA · 제조사 공지11008423연식 2025원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
Before judging a steering wheel as having premature wear or a defect, first clean the steering wheel as explained in the repair information. Some vehicles may have steering wheel stains caused by chemicals such as hand lotions.
NHTSA · 제조사 공지11007027연식 2025원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.
NHTSA · 제조사 공지11007019연식 2025원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
출처: NHTSA(미국, 퍼블릭 도메인), 캐나다 교통부(Open Government Licence – Canada), DVSA(영국, Open Government Licence v3.0), RappelConso 및 EU Safety Gate(프랑스, Licence Ouverte 2.0), 일본 국토교통성(공공데이터 이용약관 1.0), 한국 국토교통부(자동차리콜센터 car.go.kr).