연료 탱크가 변형될 가능성이 있어, 연료 파이프가 제대로 용접되지 않았을 수 있습니다…
연료 탱크가 변형될 가능성이 있으므로, 연료 배관이 탱크에 제대로 용접되지 않았을 수 있으며 이 용접부가 파손될 수 있습니다. 이 경우 연료 누출이 발생할 수 있어 화재 위험이 높아집니다.
🔔 무료 계정을 만들고 Mazda 3 (모든 세대) 이메일 알림 받기
연료 탱크가 변형될 가능성이 있으므로, 연료 배관이 탱크에 제대로 용접되지 않았을 수 있으며 이 용접부가 파손될 수 있습니다. 이 경우 연료 누출이 발생할 수 있어 화재 위험이 높아집니다.
연료 탱크에 잘못 용접된 체크 밸브는 차량 운행 중에 파손될 수 있습니다. 이로 인해 연료가 누출될 수 있으며, 이는 화재 위험을 높입니다.
Interne onderdelen van de lagedrukbrandstofpomp kunnen vervormen. Als gevolg kan de lagedrukbrandstofpomp defect raken.
運転席エアバッグにおいて、モジュールカバーのブランドエンブレムの材質が不適切なため、加水分解により劣化することがある。そのため、エアバッグ展開時に破損して飛散し、乗員が負傷するおそれがある。
Het brandstofmanagementsysteem kan een foutief mengselverhouding berekenen. Als gevolg wordt het mengsel arm en draait de motor onregelmatig.
Door een onjuiste aansturing van het hydraulische kleppentrein kan de inlaatklep, tijdens bepaalde bedrijfsomstandigheden, in contact komen met andere inwendige bewegende motoronderdelen.
The airbag and seat belt minder indicator unit may display incorrect information
Mazda North American Operations (Mazda) is recalling certain 2019 Mazda3 vehicles. The lug nuts on all four wheels may loosen, potentially resulting in a wheel detaching from the vehicle.
De as van de vacuümpomp van het remsysteem kan afslijten en de stoom in het stuurcircuit van de injector kan te hoog oplopen.
De as van de vacuümpomp van het remsysteem kan afslijten, de stoom in het stuurcircuit van de injector kan te hoog oplopen en de bevestigingsmoeren van de injectoren zijn mogelijk onvoldoende vastgezet.
Het regelcircuit van de brandstofinjectie kan met een te hoge elektrische stroom worden belast. Dit kan leiden tot kortsluiting in het regelcircuit en uitvallen van de brandstofinjectie.
De lasnaad van de brandstofinlaatregelklep aan de brandstoftank is mogelijk onjuist uitgevoerd. Hierdoor kan de lasnaad van de inlaatregelklep scheuren.
null The plastic connector between the fuel tank and the vent hose nipple may break, causing fuel to leak which could lead to a fire. Fuel leaking on to the road may cause a hazard for following vehicles.
2ディーゼルエンジンにおいて、整備作業時の燃料リターンホースの取扱いが不明確なため、当該ホースに係わる作業時に交換されなかった場合、ホース取付部のシール性低下やホース内部に亀裂が入ることがある。そのため、そのまま使用を続けると、ホース取付部や亀裂部から燃料が漏れるおそれがある。
Mogelijk is de brandstofrecirculatieleiding niet correct op de brandstoftank bevestigd.
Mazda North American Operations (Mazda) is recalling certain model year 2016 Mazda3 vehicles manufactured September 24, 2015, to October 16, 2015. During manufacturing, the fuel tanks for the affected vehicles may have deformed, resulting in a fuel leak from the recirculation pipe welded connection.
On certain vehicles. the fuel tank may contain a defect which could allow a weld to break, potentially resulting in a fuel leak. A fuel leak in the presence of an ignition source could result in a fire causing injury and/or property damage. Correction: Dealers will inspect the fuel tank and replace if necessary.
On certain vehicles. the fuel tank may contain a defect which could allow a weld to break, potentially resulting in a fuel leak. A fuel leak in the presence of an ignition source could result in a fire causing injury and/or property damage. Correction: Dealers will inspect the fuel tank and replace if necessary.
Mazda Motors North American Operations (Mazda) is recalling certain model year 2014-2016 Mazda3 vehicles manufactured January 4, 2014, to September 18, 2015. The fuel tank of the affected vehicles may have been improperly handled during manufacturing and, as a result, the welded attachment of the Inlet Check Valve (ICV) may fail and allow fuel to leak.
Mazda North American Operations (Mazda) is recalling certain model year 2015-2016 Mazda3 vehicles manufactured May 21, 2015, to August 25, 2015. The affected vehicles are equipped with a fuel tank with a shut-off valve that can allow fuel to enter into the fuel tank emissions systems. If enough fuel enters the emission system it may leak out onto the ground or result in an engine stall.
教習車の助手席補助ブレーキにおいて、ブレーキペダルのクレビスピン抜け防止用スナップピンの構造が不適切なため、使用条件によってはスナップピンが外れる場合がある。そのため、そのままの状態で使用を続けると、クレビスピンがペダルアーム部より抜け落ち、助手席補助ブレーキが効かなくなるおそれがある。
Mazda North America Operations (Mazda) is recalling certain model year 2014 Mazda3 vehicles manufactured June 12, 2013, through December 18, 2013, and model year 2014-2015 Mazda6 vehicles manufactured May 20, 2013, through December 4, 2013, and both equipped with a 2.5L engine and a regenerative engine braking system. When driving the affected vehicles in heavy rain or in deep puddles, the alternator belt may slip causing the Power Control module (PCM) to incorrectly assume failure of the charging system.
On certain vehicles, a part of the headlight housing where the Daytime Running Light (DRL) bulb is attached may be damage by heat from the bulb when the vehicle is left idling for an extended period or while driving in slow-moving traffic. In the worst case, the housing may be deformed, resulting in bulb becoming detached and loss of DRL functionality. A loss of DRL illumination could render the vehicle less visible to other motorists and to pedestrians during daylight hours, possibly resulting in a crash causing personal injury or death. Correction: Dealers will affect repairs.
エンジン制御コンピュータのアイドリング回転数制御プログラムが不適切なため、高外気温下でエアコンを作動させ、一定車速で高速走行を継続した場合、アクセルペダルを戻してもエンジン回転が下がりにくくなることがある。そのため、ブレーキ倍力装置に供給される負圧が不足し、最悪の場合、ブレーキ操作を繰り返し行うと、制動力が低下するおそれがある。
エアバッグの作動を制御するコントロール・ユニットの基板回路の半田部に微細な亀裂が 発生しているものがあるため、走行中の振動等により半田部の亀裂が進行して、回路が導 通不良となることがある。そのため、半田部の亀裂箇所によっては、警告灯が点灯せず、 衝突時にエアバッグが作動しないおそれがある。また、フェールセーフ機能がはたらいて 警告灯が点灯するとともに、エアバッグが作動しなくなるおそれがある。
출처: NHTSA(미국, 퍼블릭 도메인), 캐나다 교통부(Open Government Licence – Canada), DVSA(영국, Open Government Licence v3.0), RappelConso 및 EU Safety Gate(프랑스, Licence Ouverte 2.0), 일본 국토교통성(공공데이터 이용약관 1.0), 한국 국토교통부(자동차리콜센터 car.go.kr).