42 owners in the United States reported problems with the electrical system of this car to NHTSA (model years 1998–2003), typically at around 62,000 miles. Reported consequences: 1 crash, 2 fires, 2 injuries.
✓ 공식 데이터에 대한 Mecafile 분석1998–2003원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
13 owners in the United States reported problems with the body and structure of this car to NHTSA (model years 1998–2001), typically at around 79,000 miles. Most often named: body:roof and pillars (23%), body (23%). Reported consequences: 4 injuries.
✓ 공식 데이터에 대한 Mecafile 분석1998–2001원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
12 owners in the United States reported problems with the transmission and drivetrain of this car to NHTSA (model years 1998–2002), typically at around 107,000 miles. Most often named: automatic transmission (42%). Reported consequences: 2 crashes, 2 fires, 2 injuries.
✓ 공식 데이터에 대한 Mecafile 분석1998–2002원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
12 owners in the United States reported problems with the electrical system of this car to NHTSA (model years 2004–2009), typically at around 80,000 miles. Reported consequences: 1 fire.
✓ 공식 데이터에 대한 Mecafile 분석2004–2009원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
Faulty configurations of the control units (traction systems, signal recording triggering modules, engine control units and headlights) could cause one or more control units to malfunction, which could increase the risk of an accident. The exhaust emissions exceed the legal limits, posing a risk to the environment.
Safety Gate · EU2022년 10월 20일A12/01448/22연식 2004–2015원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
Issue: On certain vehicles equipped with the emergency calling (eCall) system, the SIM card for the communications module could disable itself. If this happens, the eCall system would not work properly when there is a crash or when the SOS button is pressed. Safety Risk: If the eCall system does not work in an emergency situation, there could be a delay in response from emergency services. Corrective Actions: Mercedes-Benz will notify owners by mail and send a wireless over-the-air software update to each vehicle. If the update cannot be completed successfully, you will be notified to schedule an appointment to have the update performed by a dealer.
캐나다 교통부2022년 5월 20일2022263연식 2019–2021원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
**고객 불만:** 도어 내 스피커 부근에서 덜컹거리는 소음이 발생함.
**원인:** 분석 중.
**조치:** 원인을 좁히기 위해 먼저 도어 트림을 분리하십시오. 도어 트림을 분리한 상태에서도 소음이 계속 발생하면 스피커 쪽으로 진단을 계속 진행하고, 필요한 경우 유용한 동영상을 첨부하여 TIPS 케이스를 생성하십시오.
**참고:** 보증 클레임에서 이 문서를 참조하고, 진단이 완료되면 문제를 일으키는 부품에 따라 손상 코드를 선택하십시오. 도어 트림을 분리했을 때 소음이 멈추면 LI72.10P067691에 따라 진행하십시오.
**정보:** 이 경우 보증 클레임에서 스피커에 대한 손상 코드를 사용하지 마십시오!
NHTSA · 제조사 공지11038217연식 2004–2017자동 번역 · 원문: 영어자세히 보기 →
Complaint Customer complaints relating to automatic transmission 725.0 (NAG3 Classic /9GTRONIC automatic transmission) and 725.1 (NAG3 facelift/9GTRONIC automatic transmission facelift) For faster, more effective and more targeted diagnosis, Intelligent Predictive Repair (IPR) has been developed and integrated into XENTRY Diagnosis. This ensures an automated diagnosis process. Cause As part of the ongoing quality monitoring process and associated quality and damaged part appraisals, a high number of ineffective repairs have been discovered. Such ineffective repairs have a negative impact on all those involved. For the customer, it means high costs and long repair times and for the dealer, it may result in the warranty claim being rejected. Remedy General note: IPR is available for: NAG3 Classic (automatic transmission 725.0) NAG3 Classic AMG sport model (AMG 43 and AMG 53 with converter, automatic transmission 725.0) NAG3 Classic Hybrid (automatic transmission 725.0) NAG3 Classic AMG 63 (automatic transmission 725.0) NAG3 MOPF ISG2 (automatic transmission 725.1) NAG3 MOPF Hybrid (automatic transmission 725.1) NAG3 MOPF AMG sport model (AMG 53/AMG 53e with ISG48V2 & converter /hybrid, automatic transmission 725.1) NAG3 MOPF AMG 43/63 with engine 139/177 (automatic transmission 725.1) Steps for the Service Advisor: Important: The more information and detail that can be given to the workshop about the complaint, then the more effective the subsequent diagnosis with IPR can be. To this end, a detailed service reception questionnaire has been provided to help the Service Advisor ask the right questions about the complaint. Ask precise details about the customer complaint and the conditions and context. Fill out the service reception questionnaire (please see WIS document: OF27.00P300005A) for customer complaints in detail and forward it to the workshop. Operation steps for the workshop employee: 1. Perform quick test 2. Access the transmission control unit via XENTRY Diagnosis 3. Select "A customer complaint has been received" and carry out all subsequent operation steps (IPR diagnosis path). 4. The IPR repair instructions are displayed, Carry out the IPR repair instructions without performing any further diagnostic or repair steps. Important: The IPR repair instructions are binding and must be carried out. Differing repairs are possible; such repairs must be documented in XENTRY in free text. Please observe the information regarding the IPR diagnosis process in XENTRY. Conventional diagnosis and subsequent appropriate repairs are only permitted if IPR does not specify any repair instructions. Invoicing for the guided IPR steps: Operation item 270640 and 0.1 hours Notice regarding warranty: The use of IPR in association with warranty claims is mandatory! If the IPR repair instructions are disregarded without justification, the warranty claims may be rejected and/or are subject to debit. IPR will provide a measure to repair the vehicle based on various data sources (EEPROM, fault codes, etc). Please consider the vehicle maintenance record of the vehicle. For warranty and goodwill repairs, the transmission ECU test log and/or IPR test result must be uploaded into Paperless XENTRY Diagnosis (pXD) . If repair is being determined based of oil pan condition pictures of oil pan MUST be provided to warranty as justification. Tamperproof documentation: The IPR repair instructions are stored in the control unit log. Please file this document in a tamperproof manner either in digital form or as a hardcopy printout and also enclose a printout with the damaged part. In this regard, please comply with the countryspecific warranty requirements of the MPC/general distributor.
NHTSA · 제조사 공지11038187연식 2016–2017원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
**고객 불만**
60MPH에서 제동 시 차량 진동이 발생하여 재방문 정비를 받음.
참고: 증상이 타이어나 휠 진동과 유사하더라도, 항상 발생하는지 아니면 제동 시에만 발생하는지에 따라 뚜렷하게 구별되는 경우가 많습니다.
**원인**
진동의 원인은 대개 로터 또는 허브/휠 베어링의 과도한 측면 런아웃일 가능성이 높습니다. 그러나 다른 가능한 원인이 있는지 전체 시스템을 함께 점검해야 합니다.
1. 이전 충돌로 인한 손상
2. 회전 부품 없이 차량을 장기간 방치한 경우
3. 휠 베어링/허브의 측면 런아웃
4. 휠 결합면이 과도하게 조여진 경우(WIS 토크 절차를 따르지 않음)
5. 결합면이 과도하게 개조된 경우(도장, 긁힘, 휨 등)
**조치 방법**
작업을 수행하기 전에 첨부된 작업 시트 전체를 읽어 보십시오. 작업 후에는 마지막 페이지를 검토하고 그에 따라 작업하십시오.
참고: 이 문서는 사전 승인이 아니며 보증과 관련된 문서도 아닙니다. 진단 목적으로만 사용됩니다.
진행 방법에 대해 의문이 있거나, 작업 시트를 수행했음에도 같은 증상으로 차량이 다시 입고된 경우에는 작업 시트에 나온 측정을 다시 수행한 후, Body, Chassis, and Entertainment 팀에 TIPS 케이스를 등록하십시오.
NHTSA · 제조사 공지11038186연식 2004–2017자동 번역 · 원문: 영어자세히 보기 →
최신 포럼 글
아직 토론이 없습니다.
결함과 토론은 세대별로 정리됩니다. 글을 올리려면 위에서 세대를 선택하세요.
출처: NHTSA(미국, 퍼블릭 도메인), 캐나다 교통부(Open Government Licence – Canada), DVSA(영국, Open Government Licence v3.0), RappelConso 및 EU Safety Gate(프랑스, Licence Ouverte 2.0), 일본 국토교통성(공공데이터 이용약관 1.0), 한국 국토교통부(자동차리콜센터 car.go.kr).