11% of periodic inspections of this car in Finland found a fault on this item serious enough to fail the car (361 faults in 3,383 inspections in 2025): 2.4 times as often as cars of the same age.
✓ 공식 데이터에 대한 Mecafile 분석2002–2010원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
The lower pinion needle bearing may have been omitted during manufacture of the steering gear due to insufficient controls in the suppliers manufacturing process. It is possible the pinion may disengage from the steering gear with loss of steering control.
DVSA · 영국2015년 8월 4일R/2015/135연식 2008원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
null There is a possibility that the lower pinion needle bearing may have been omitted from the steering system during manufacture. If this is the case, the upper bearing would be overloaded and, if left in this condition, the pinion may disengage causing loss of steering control.
Safety Gate · EU2015년 7월 3일A12/0872/15연식 2002–2008원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
The engine ECM unit may have an error with its software. This could under certain exceptional engine start circumstances result in the ECM setting an incorrect engine throttle valve position. When the engine speed is in excess of 3600 rpm the customer may briefly experience an unexpected acceleration. However the driver can counter this by applying the brakes.
DVSA · 영국2015년 4월 20일R/2015/066연식 2010원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
최신 기술 서비스 공지
이 모델의 기술 서비스 공지를 찾지 못했습니다.
출처: NHTSA(미국, 퍼블릭 도메인), 캐나다 교통부(Open Government Licence – Canada), DVSA(영국, Open Government Licence v3.0), RappelConso 및 EU Safety Gate(프랑스, Licence Ouverte 2.0).