SERVICE INFORMATION If one or more of these EVAP leak DTCs are stored (P0442, P0455, P0456) on a 2007 through 2011 Nissan vehicle, a loose fuel fill cap may be the cause. Use the following resources to perform diagnostics and confirm the cause of stored DTCs. ASIST: - Appropriate Service Manual diagnostic procedures - Applicable Technical Service Bulletins (TSB). Leak Test: - With CONSULT-III plus - WORK SUPPORT >> EVAP SYSTEM CLOSE. NOTE: Use Essential Tool J-42909 or equivalent to pressurize the EVAP system. - With a "Smoke" leak detection machine. Refer to the machine's Operator's Manual for proper use. Make sure the customer is informed of the proper fuel filler cap installation.
NHTSA · 제조사 공지10192266연식 2011원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
Nissan: A loose fuel fill cap is the cause of evap leak dtcs (p0442, p0455, p0456) stored on some vehicles. Model years 2007-2011. Model not listed. *pe
NHTSA · 제조사 공지10053956연식 2011원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
"2015 juke; engine turns off or hesitates when accelerating from a stop during hot ambient temperatures (+100f) if you confirm the engine turns off or hesitates when accelerating from a stop during hot ambient temperatures (+100f), and the engine is able to be restarted. Action 1. Refer to step 6 in the service procedure to see if this bulletin applies to the vehicle you are working on. 2. If this bulletin applies, reprogram the ecm."
NHTSA · 제조사 공지10091603연식 2015원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
출처: NHTSA(미국, 퍼블릭 도메인), 캐나다 교통부(Open Government Licence – Canada), DVSA(영국, Open Government Licence v3.0), RappelConso 및 EU Safety Gate(프랑스, Licence Ouverte 2.0), 일본 국토교통성(공공데이터 이용약관 1.0), 한국 국토교통부(자동차리콜센터 car.go.kr).