En raison d’une erreur dans le processus de pliage du coussin gonflable du conducteur, le bouclier thermique peut ne pas se déplacer complètement autour du gonfleur lorsque l’airbag est activé. par conséquent, le gaz chaud peut directement entrer en contact avec le panneau avant de l’airbag, causant des dommages de brûlure au matériau du sac. en conséquence, l’airbag peut se déchirer pendant l’inflation réduisant sa fonction protectrice.
Safety Gate · EU · RappelConso · 프랑스2021년 3월 26일a12/00391/21연식 2019원문(프랑스어)으로 표시 중 · 번역 대기자세히 보기 →
In the event that the driver airbag is deployed during a frontal impact small holes may occur on the surface of the airbag. The holes are caused by high temperature gases from the airbag inflator exhausting directly onto the surface of the airbag material. The high temperature gas/airbag material may contact the drivers skin. The deployment performance of the driver airbag is not affected.
DVSA · 영국2013년 2월 25일R/2013/019연식 2012원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
null In the event that the driver's airbag is deployed during a frontal impact, small holes may appear on the surface of the airbag. The holes are caused by high temperature gas from the airbag inflator exhausting directly onto the surface of the airbag material. Contact of the high temperature gas / airbag material with the driver’s skin can cause burns.
Safety Gate · EU2013년 2월 20일A12/0243/13연식 2012원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
Due to a design change introducing an internal chamfer in the rear seat back lock button, the latch actuation rod can catch on this chamfer, preventing its upwards movement.As a result the rear seat back may not be securely latched when returned to its upright position after folding, and the occupant of the rear seat and any items stored in the luggage compartment may not be correctly restrained in the event of an accident, increasing the risk of injury.
Safety Gate · EU2021년 10월 12일A12/01430/21연식 2019–2020원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
On certain vehicles, the rear seat latch strikers (which secure the seat backrest in the upright position) may have been manufactured incorrectly. As a result, the rear seat back strikers may deform during a frontal vehicle crash, which could increase the risk of injury to a rear seat occupant. Correction: Dealers will replace the rear seat latch strikers with updated versions.
캐나다 교통부2012년 7월 12일2012211연식 2012원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
Nissan is recalling certain model year 2012 juke vehicles manufactured from february 3, 2012, through may 26, 2012. Due to an incomplete weld penetration, the rear seat back striker may partially separate in a crash.
NHTSA · 미국2012년 7월 12일12V328000연식 2012원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
출처: NHTSA(미국, 퍼블릭 도메인), 캐나다 교통부(Open Government Licence – Canada), DVSA(영국, Open Government Licence v3.0), RappelConso 및 EU Safety Gate(프랑스, Licence Ouverte 2.0), 일본 국토교통성(공공데이터 이용약관 1.0), 한국 국토교통부(자동차리콜센터 car.go.kr).