무료 열람 · 무료 계정으로 기여Anticars(2000)의 후속
로그인계정 만들기
NANHTSA · 제조사 공지11028233

기술 서비스 공지

원문(영어)으로 표시 중 · 번역 대기

Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): **P08A6 Gear Lever Position Sensor System Multiple Sensor Correlation (Manual Transmission Only). P152F Engine Hood Switch 2 / Engine Hood Switch 1 Correlation.** P0300 - Multiple Cylinder Misfire. P152E - Engine Hood Switch 2 Circuit High. P0032 - O2 Sensor 1/1 Heater Circuit High. P0038 - O2 Sensor 1/2 Heater Circuit High P0052 - O2 Sensor 2/1 Heater Circuit High P0058 - O2 Sensor 2/2 Heater Circuit High. P0132 - O2 Sensor 1/1 Circuit High. P0138 - O2 Sensor 1/2 Circuit High. P0152 - O2 Sensor 2/1 Circuit High. P0158 - O2 Sensor 2/2 Circuit High P2100 - Electronic Throttle Control Motor Circuit Customers may also comment on one or more of the following: **"Service Transmission message on in the Instrument Panel Cluster (IPC) due to clutch slip detection (Manual Transmission Only). NOTE: Customers might experience wheel spin or slippage and the PCM could interpreted the wheel spin or slippage as slipping the clutch too much and to avoid clutch damage, the customer may see the message in the IPC. Vehicle is in limp home mode.** Spark knock/detonation sound from the engine at idle. **Other software enhancements included: Engine oil pump in high pressure mode with cold engine oil to improve valvetrain component reliability.** This bulletin involves reprogramming the PCM with the latest available software.

해당: Jeep Gladiator (연식 2021)

공식 공지 ↗

출처: NHTSA(미국, 퍼블릭 도메인), 캐나다 교통부(Open Government Licence – Canada), DVSA(영국, Open Government Licence v3.0), RappelConso 및 EU Safety Gate(프랑스, Licence Ouverte 2.0), 일본 국토교통성(공공데이터 이용약관 1.0), 한국 국토교통부(자동차리콜센터 car.go.kr).