무료 열람 · 무료 계정으로 기여Anticars(2000)의 후속

Porsche 924

1976–1988 · 1 세대 · 결함 2건 · 2개 시장
세대
모든 세대9241976–19882829
연식
시장전체NA
리콜심각엔진NA

Fuel System

The short section of high pressure fuel hose between the fuel rail and the fuel pressure regulator, which runs alongside the intake manifold, may be subject to hardening. In the event that this line does harden, fuel leaks could develop between the hose and metal pipe fittings. Leaking fuel could ignite on the hot exhaust system and lead to an engine compartment fire. Correction: Fuel hose will be replaced on 924s, 944 and 944 turbo vehicles and the fuel hose and fuel rail will be replaced on 944s vehicles.

캐나다 교통부1990년 4월 4일1990051연식 1987–1988원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
리콜심각엔진NA

Fuel system, gasoline:Fuel injection system:Fuel rail

The hose material used in the short section of the high pressure fuel line hose, between the fuel rail and fuel pressure regulator, is subject to hardening, and could cause fuel leaks between the hose and the metal pipe fittings.

NHTSA · 미국1990년 4월 2일90V061000연식 1987–1988원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
리콜보통서스펜션NA

리콜

The rear spring plates (radius arms) on these vehicles may have been improperly tempered by supplier. Improperly hardened spring plates could crack and possibly break . This could affect lateral guidance of the corresponding rear wheel resulting in loss of vehicle control.

캐나다 교통부1985년 10월 9일1985110연식 1982원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
리콜보통서스펜션NA

Suspension:Rear:Springs:Leaf spring assembly

Rear spring plates may not have been tempered and are not of the proper hardness value. Consequence of defect: The plates could crack and/or break, affect lateral guidance of the rear wheel, and result in loss of control of the car which may cause an accident.

NHTSA · 미국1985년 7월 26일85V095000연식 1982원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
리콜보통실내NA

Seat belts:Front:Retractor

The rear seat belts do not include emergency-locking or automatic-locking retractors. The belts do not comply with federal motor vehicle safety standard no. 208, "occupant crash protection".

NHTSA · 미국1983년 10월 26일83V111000연식 1982원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
리콜보통실내NA

리콜

The bridge for the seat belt locking (inertia retractor) mechanism on one suppliers belts may have been improperly crimped. This condition may result in a non-locking retractor.

캐나다 교통부1979년 9월 28일1979167연식 1980원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
리콜보통실내NA

Seat belts:Front:Retractor

The bridge in the seat belt buckle locking mechanism of the front seat belt assembly may have been improperly bent. The buckle may not hold properly and will release, if extreme forces are applied.

NHTSA · 미국1979년 9월 27일79V222000연식 1980원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
리콜경미엔진NA

리콜

Vehicles were inadvertently equipped with a 1979 model vehicle emission control information label which contains an incorrect vacuum hose touting diagram. These vehicles do not comply with the labelling requirements of canada motor vehicle safety standard 1101 - emission devices.

캐나다 교통부1980년 5월 6일1980070연식 1980원문(영어)으로 표시 중 · 번역 대기자세히 보기 →

출처: NHTSA(미국, 퍼블릭 도메인), 캐나다 교통부(Open Government Licence – Canada), DVSA(영국, Open Government Licence v3.0), RappelConso 및 EU Safety Gate(프랑스, Licence Ouverte 2.0), 일본 국토교통성(공공데이터 이용약관 1.0), 한국 국토교통부(자동차리콜센터 car.go.kr).