On certain vehicles, an electrical short within the airbag electronic control unit may cause inadvertent deployment of the front airbags and seat belt pretensioners. Correction: Dealers will replace the airbag electronic control unit (ECU). Note: parts will not be available until April 2003.
캐나다 교통부2002년 11월 15일2002212연식 1995원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
Certain passenger vehicles. Static electricity can build up within the passenger-side air bag module and create significant enough charge to cause an inadvertent air bag deployment during triggering events. Most of these triggering events have occurred in cooler, dry weather and have generally included dusting or wiping of the dashboard, starting the car, or closing the door. Unexpected air bag deployment can result in occupant injury. Correction: Dealers will install a front passenger-side air bag module grounding strap
캐나다 교통부2001년 7월 3일2001191연식 1998원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
Note: 5 door vehicles. These vehicles do not comply with c.M.V.S.S. 210 - seat belt assembly anchorages. Vehicles were assembled with a non heat treated outboard attachment plate on the safety belt which could in certain circumstances deform and detach from the seat anchorage. Correction: Front seat belts will be inspected and replaced if necessary.
캐나다 교통부1996년 5월 7일1996070연식 1996원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
During static testing of belt anchorage points, the outboard attachment plate being used in the testing deformed and detached from the seat anchorage. This does not comply with fmvss no. 209, "seat belt assemblies" and no. 210, "seat belt assembly anchorages."
NHTSA · 미국1996년 5월 3일96V077000연식 1996원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
On certain passenger vehicles, the air bag electronic control unit (ecu) is designed to sense and discriminate frontal impact events, command air bag and seat belt pretensioner deployments in a timely manner, and perform continuous diagnostics of the air bag system in the vehicle. Due to the possible insufficient sealing of the bottom of an electrolyte capacitor, it is possible for it to leak electrolyte within the air bag ecu. Also, in high humidity environments, the operation of the vehicle air conditioner can cause rapid cooling of the ecu, which in turn may cause the formation of condensation with the unit.
NHTSA · 미국2002년 11월 14일02V308000연식 1995원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
Vehicle description: Passenger vehicles. Static electricity can build up within the passenger-side air bag module and create enough of a charge to cause an inadvertent air bag deployment. Most of these inadvertent deployments have occurred in cooler, dry weather, and have generally included dusting or wiping of the dashboard, starting the car, or closing the door.
NHTSA · 미국2001년 7월 2일01V222000연식 1998원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
Note: 1994-95 3 and 5 door models and 1995 convertibles. The seat assemblies may be missing one or more of the arc welds that join the seat back recliner mechanism to the seat back frame. This could result in the seat back falling backwards if the vehicle is impacted from the rear. Sudden failure of a driver seat back could occur without prior warning and cause the driver to lose control, resulting in a possible crash. Correction: Seat backs will be inspected and replaced if required.
캐나다 교통부1995년 2월 16일1995028연식 1994–1995원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
On certain vehicles equipped with manually adjusted front seats, it is possible that the two (2) trigger springs mounted to the fore/aft adjustment lever on both front seats cannot develop sufficient force to properly lock the seat rails. This could result in the seat moving in the event of a collision. Correction: faulty springs will be replaced with ones with the appropriate trigger spring force.
캐나다 교통부1994년 8월 8일1994127연식 1994원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
Two trigger springs mounted to the fore/aft adjustment lever do not develop sufficient force to properly lock the seat rails. After the seat is adjusted, this does not allow the seat rail lock to properly engage, which can cause the seat to move in a sudden stop or collision.
NHTSA · 미국1994년 7월 8일94V127000연식 1994원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
A weld in the seat rails was not made, increasing the risk of fatigue cracks forming around the attachment bushings on the height adjustment mechanism, causing the possibility of the height adjuster breaking in a rear end collision and allowing the seat to fold backwards.
NHTSA · 미국1994년 6월 13일94V110000연식 1994원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
Vehicle description: Passenger vehicles. The air bag alert label on the driver side visor was omitted. This does not conform to the requirements of fmvss no. 208, "occupant crash protection."
NHTSA · 미국1998년 6월 23일98V139000연식 1997–1998원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
출처: NHTSA(미국, 퍼블릭 도메인), 캐나다 교통부(Open Government Licence – Canada), DVSA(영국, Open Government Licence v3.0), RappelConso 및 EU Safety Gate(프랑스, Licence Ouverte 2.0), 일본 국토교통성(공공데이터 이용약관 1.0), 한국 국토교통부(자동차리콜센터 car.go.kr).