공지
Certain Model 3 vehicles might have too few HV battery positive contactor mounting nuts installed, which can allow movement that might affect the conductivity of the contactor terminals.
🔔 무료 계정을 만들고 Tesla 3 (모든 세대) 이메일 알림 받기
기술 서비스 공지(TSB)는 제조사가 알려진 문제에 대해 딜러에게 보내는 수리 지침입니다. 안전 리콜은 아니지만 결함을 확인해 주는 경우가 많습니다.
Certain Model 3 vehicles might have too few HV battery positive contactor mounting nuts installed, which can allow movement that might affect the conductivity of the contactor terminals.
Certain Model 3 vehicles might have too few HV battery positive contactor mounting nuts installed, which can allow movement that might affect the conductivity of the contactor terminals.
Certain Model 3 vehicles might have too few HV battery positive contactor mounting nuts installed, which can allow movement that might affect the conductivity of the contactor terminals.
Certain Model 3 vehicles might have too few HV battery positive contactor mounting nuts installed, which can allow movement that might affect the conductivity of the contactor terminals.
Certain Model 3 vehicles might have too few HV battery positive contactor mounting nuts installed. Too few mounting nuts allow movement that might affect the conductivity of the contactor terminals.
Certain Model 3 and Model Y vehicles were manufactured with High Voltage (HV) batteries containing cell modules that do not meet Teslas internal quality standards, potentially resulting in a reduction of range.
On some 2024+ Model 3 vehicles built at Fremont, a rattling noise may be noticed from the driver and/or front passenger instrument panel air vent while the face-level air vents are directed to straight ahead air flow.
On some 2024+ Model 3 built at Fremont, a rattling noise may be noticed from the driver and/or front passenger instrument panel air vent while the face-level air vents are directed to straight ahead air flow.
On certain Model 3 vehicles, the rear drive unit HV header bolts and the positive contactor bolt within the High Voltage (HV) battery ancillary bay were insufficiently torqued to internal specifications during manufacturing.
On certain Model 3 vehicles, the positive busbar nut under the power conversion system and additional bolts within the High Voltage (HV) battery ancillary bay were insufficiently torqued during manufacturing.
Certain Model 3 vehicles were configured with incorrect shunt resistance values that can affect charging capacity and range performance.
Certain Model 3 and Model Y vehicles may require HV battery replacement because the wire bonds within their HV batteries may not have been manufactured to internal specifications, which may result in a reduction of range.
On certain Model S, Model X, and Fremont-built Model 3 vehicles, the Printed Circuit Board (PCB) for the LH side repeater camera may lose electrical continuity over time, resulting in premature failure of the camera.
Certain Model 3 and Model Y vehicles were manufactured with high voltage (HV) batteries having cell separators that do not meet Tesla?s internal standards of quality, potentially resulting in a reduction of range.
On certain Model S, Model X, and Fremont-built Model 3 vehicles, the Printed Circuit Board (PCB) for the RH side repeater camera may lose electrical continuity over time, resulting in premature failure of the camera.
특정 Model S, Model X 및 Fremont에서 생산된 Model 3 차량에서, 좌측(LH) 및 우측(RH) 측면 리피터 카메라의 인쇄 회로 기판(PCB)이 시간이 지나면서 전기적 연속성을 잃을 수 있으며, 이로 인해 카메라가 조기에 고장 날 수 있습니다.
일부 Model S, Model X 및 Fremont에서 생산된 Model 3 차량에서, 좌측(LH) 측면 리피터 카메라의 인쇄회로기판(PCB)이 시간이 지나면서 전기적 연속성을 잃어 카메라가 조기에 고장 날 수 있습니다.
Certain Model 3 and Model Y vehicles were manufactured with high voltage (HV) batteries having cell separators that do not meet Tesla?s internal standards of quality, potentially resulting in a reduction of range.
On certain Model S, Model X, and Fremont-built Model 3 vehicles, the Printed Circuit Board (PCB) for the RH side repeater camera may lose electrical continuity over time, resulting in premature failure of the camera.
Certain Model 3 and Model Y vehicles may have a loosened fastener inside the HV battery assembly, which could cause the HV battery to power down.
On certain Model 3 vehicles, the image from the rear facing camera might not be displayed on the touchscreen.
Certain Model 3 vehicles were configured with incorrect shunt resistance hex values that can affect charging capacity and range performance.
On certain Model 3 vehicles, the LH side of the 12V battery bracket support might come loose due to improper welds during manufacture.
Certain Model 3, Model S, and Model X vehicles were equipped with 2nd generation Universal Mobile Connector (UMC) inline units having a proximity circuit resistor that is out of specification. This resistor within the affected UMC inline unit might prevent charging, might interrupt charging while in progress, and might affect the functionality of the UMC charge handle button when disconnecting the charge handle from the vehicle charge port.
The clamshell graft inside the HV battery was not fastened to Tesla?s internal specifications. This condition might result in a reduction of vehicle driving range.
출처: NHTSA(미국, 퍼블릭 도메인), 캐나다 교통부(Open Government Licence – Canada), DVSA(영국, Open Government Licence v3.0), RappelConso 및 EU Safety Gate(프랑스, Licence Ouverte 2.0), 일본 국토교통성(공공데이터 이용약관 1.0), 한국 국토교통부(자동차리콜센터 car.go.kr).