25 owners in the United States reported problems with the engine and cooling of this car to NHTSA (model years 1991–1997), typically at around 194,000 miles. Most often named: engine (32%), engine:gasoline (32%). Reported consequences: 3 fires.
✓ 공식 데이터에 대한 Mecafile 분석1991–1997원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
21 owners in the United States reported problems with the airbags of this car to NHTSA (model years 1991–1995), typically at around 130,000 miles. Most often named: frontal (52%). Reported consequences: 12 crashes, 9 injuries.
✓ 공식 데이터에 대한 Mecafile 분석1991–1995원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
18 owners in the United States reported problems with the tyres of this car to NHTSA (model years 1991–1995), typically at around 319,000 miles. Most often named: tread/belt (22%). Reported consequences: 5 crashes, 3 injuries.
✓ 공식 데이터에 대한 Mecafile 분석1991–1995원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
16 owners in the United States reported problems with the accelerator and cruise control of this car to NHTSA (model years 1991–1997), typically at around 140,000 miles. Reported consequences: 4 crashes, 4 injuries.
✓ 공식 데이터에 대한 Mecafile 분석1991–1997원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
16 owners in the United States reported problems with the seat belts of this car to NHTSA (model years 1991–1997), typically at around 170,000 miles. Most often named: front:anchorage (31%), rear/other (31%), front:buckle assembly (25%). Reported consequences: 3 injuries.
✓ 공식 데이터에 대한 Mecafile 분석1991–1997원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
Is het voertuig uitgerust met een afneembare trekhaak van het merk Toyota, Lexus of Brink, dan bestaat de kans dat deze in een uitzonderlijk geval, als gevolg van veelvuldig en zwaar gebruik, kan afbreken.
rdw2013년 3월 19일MGP120373연식 2000–2004원문(네덜란드어)으로 표시 중 · 번역 대기자세히 보기 →
TSB: TMNA 액세서리 영업 및 마케팅 부서는 2021년식 도요타 차량용 도요타 페인트 보호 필름(PPF) 데칼을 개발했습니다. 이 데칼은 특별히 개발된 약한 접착제로 처리되어 있습니다. 데칼은 작은 보닛과 큰 보닛에 맞게 두 가지 크기(2.8 in. x 8 in. 및 4 in. x 8 in.)로 제공되며, 모든 시리즈의 PPF 상단에 TLS 액세서리 장착 시설에서 부착됩니다. 이 데칼은 디테일/세차 및 고객 인도 전까지 필름에 부착된 상태를 유지하도록 의도되었습니다. 고객 인도 직전에는 이 게시판의 제거 절차를 따라 데칼과 접착제가 남긴 잔여물을 모두 제거하십시오.
TSB: 제조 공정 중에는 끌림(pulling)이나 드리프팅(drifting) 같은 현상을 줄이기 위해 타이어를 짝을 맞춘 세트로 차량에 장착합니다. 차량 인도 전에 휠을 교체하거나 재가공하는 경우, 타이어는 원래 위치와 회전 방향을 유지한 채 차량에 있어야 합니다. 원래 타이어가 차량의 같은 위치에 남아 있도록 하려면 이 게시판의 타이어 위치 설정 절차(Tire Positioning Procedure)를 참조하십시오.
출처: NHTSA(미국, 퍼블릭 도메인), 캐나다 교통부(Open Government Licence – Canada), DVSA(영국, Open Government Licence v3.0), RappelConso 및 EU Safety Gate(프랑스, Licence Ouverte 2.0), 일본 국토교통성(공공데이터 이용약관 1.0), 한국 국토교통부(자동차리콜센터 car.go.kr).