무료 열람 · 무료 계정으로 기여Anticars(2000)의 후속

Toyota 비츠

1999–2019 · 3 세대 · 결함 52건 · 6개 시장
세대
연식
비츠 III · 2010–2019
리콜심각엔진EU

The fuel-delivery resin spacer between the fuel injector and the engine's cylinder head does not have the…

The fuel-delivery resin spacer between the fuel injector and the engine's cylinder head does not have the appropriate thermal resistance. Consequently, it could deform, reducing the injector's head sealing, resulting in fuel leakage and increasing the risk of fire.

Safety Gate · EU2020년 2월 6일A12/00194/20연식 2017–2018원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
비츠 III · 2010–2019
리콜심각엔진JP

燃料ホース/パイプ

スーパーチャージャ搭載車両において、燃料配管(デリバリパイプ)を取付ける樹脂製スペーサの材質が不適切なため、熱等によりスペーサが変形して取付ボルトが緩み、エンジン振動等により当該ボルトが折損することがある。そのため、インジェクタ取付部がシール不良となり燃料が漏れ、最悪の場合、火災に至るおそれがある。

국토교통성 · 일본2020년 1월 29일1229770연식 2017–2018원문(일본어)으로 표시 중 · 번역 대기자세히 보기 →
비츠 II · 2005–2010비츠 III · 2010–2019
리콜심각엔진EU

null Due to insufficient air flow efficiency in the intake system, oil may accumulate in the intercooler

null Due to insufficient air flow efficiency in the intake system, oil may accumulate in the intercooler. Under certain driving conditions, the oil may flow into the combustion chamber and might cause engine damage, which may increase the risk of a fire in the engine compartment due to leaked oil.

Safety Gate · EU2014년 11월 28일A12/1918/14연식 2008–2014원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
비츠 II · 2005–2010
리콜보통엔진JP

排ガス減少装置

排気ガス再循環装置(EGR)のパイプの強度が不足しているため、排気ガスの熱によるパイプの伸縮により、当該パイプに亀裂が発生し異音とともに排気ガスが漏れることがある。また、そのままの状態で使用を続けると、亀裂が進行して折損し、最悪の場合、排出ガスが基準値を満足しなくなるおそれがある。

국토교통성 · 일본2009년 1월 28일1122442연식 2005–2008원문(일본어)으로 표시 중 · 번역 대기자세히 보기 →
비츠 I · 1999–2004비츠 II · 2005–2010
리콜보통엔진JP

연료 펌프

전동식 연료펌프 내부 모터의 인접한 코일선이 서로 간섭하고 있기 때문에, 연료 속 미세 이물질과 모터 진동으로 인해 코일선의 피복이 마모될 수 있습니다. 그대로 사용을 계속하면 코일선의 피복이 손상되어 단락이 발생하고, 연료펌프가 작동하지 않게 되어 엔진이 정지하고 재시동할 수 없게 될 우려가 있습니다.

국토교통성 · 일본2007년 10월 17일1119520연식 2003–2005자동 번역 · 원문: 일본어자세히 보기 →
비츠 I · 1999–2004
리콜보통엔진NA

Engine and engine cooling

On certain passenger vehicles, due to improper molding of the resin body of the crankshaft position senor installed on the engine block, engine oil may penetrate the seal and enter the sensor wiring connector. The wire harness connector may not be sufficiently attached to the locking tab of the sensor wiring connector.

NHTSA · 미국2006년 7월 19일06V266000연식 2001–2002원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
비츠 I · 1999–2004
리콜보통엔진NA

Engine

On certain vehicles, improper manufacturing of the Crankshaft Position Sensor body could cause engine oil to penetrate the seal and enter the sensor wiring connector. In addition, the wire harness connector may not be sufficiently attached to the locking tab of the sensor wiring connector. Engine oil inside the sensor wiring connector could cause expansion due to the heat of the engine and could deform the sensor wiring connector. In the worst case, the connector may become disconnected, which could cause the engine to stall while driving and not be able to be restarted. Correction: Dealers will replace the Crankshaft Position Sensor.

캐나다 교통부2006년 7월 18일2006181연식 2001–2002원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
비츠 I · 1999–2004
리콜보통엔진NA

Engine and engine cooling:Engine:Gasoline

Vehicle description: Passenger vehicles originally sold or currently registered in the states of alaska, colorado, idaho, illinois, iowa, kansas, maine, michigan, minnesota, montana, nebraska, nevada, new hampshire, new york, north dakota, south dakota, vermont, wisconsin, and wyoming. Condensed moisture from the positive crankcase ventilation (pcv) port could seep toward the brake vacuum port inside the intake manifold and start to freeze.

NHTSA · 미국2000년 9월 7일00V256000연식 2000원문(영어)으로 표시 중 · 번역 대기자세히 보기 →

출처: NHTSA(미국, 퍼블릭 도메인), 캐나다 교통부(Open Government Licence – Canada), DVSA(영국, Open Government Licence v3.0), RappelConso 및 EU Safety Gate(프랑스, Licence Ouverte 2.0), 일본 국토교통성(공공데이터 이용약관 1.0), 한국 국토교통부(자동차리콜센터 car.go.kr).