Leitura livre · conta gratuita para contribuirSucessor do Anticars (2000)

Acura CL

1996–2003 · 2 gerações · 17 defeitos documentados · 1 mercados
Gerações
Ano do modelo
MercadoTodosNA
CL II (2001) · 2000–2003
RecallCríticoInteriorNA

Airbag

Issue: On certain vehicles, exposure to moisture over time could cause the driver-front airbag not to inflate properly in a crash. In some cases, this could cause an airbag not to fully inflate, while in others it could cause it to deploy with more force than normal. It could also cause the inflator to rupture. If the airbag inflator ruptures, small pieces of metal could be propelled toward vehicle occupants or cause damage to the airbag and prevent its proper function. Note: This recall is for airbag inflators that may have been installed when the vehicle had the steering wheel airbag replaced. Safety Risk: In a crash requiring an airbag deployment, the driver-front airbag may not inflate properly or the inflator could rupture. This could create a risk of injury. Corrective Actions: The company will notify owners by mail. There may be a significant delay before replacement parts are available. The company will send you a second letter once replacement parts are available and instruct you to take your vehicle to a dealer to inspect the driver-front airbag inflator. If the inflator requires replacement, a newly design part will be installed.

Transport Canada17 de jan. de 20202020015Anos-modelo 2001–2002Exibido no inglês original · tradução pendenteVer detalhes →
CL I (1996) · 1996–1999CL II (2001) · 2000–2003
RecallCríticoInteriorNA

Airbag

Issue: On certain vehicles, exposure to moisture over time could cause the driver-front airbag not to inflate properly in a crash. In some cases, this could cause an airbag not to fully inflate, while in others it could cause it to deploy with more force than normal. It could also cause the inflator to rupture. If the airbag inflator ruptures, small pieces of metal could be propelled toward vehicle occupants or cause damage to the airbag and prevent its proper function. Safety Risk: In a crash requiring an airbag deployment, the driver-front airbag may not inflate properly or the inflator could rupture. This could create a risk of injury. Corrective Actions: The company will notify owners by mail. There may be a significant delay before replacement parts are available. The company will send you a second letter once replacement parts are available and instruct you to take your vehicle to a dealer to inspect the driver-front airbag inflator. If the inflator requires replacement, a newly design part will be installed.

Transport Canada17 de jan. de 20202020014Anos-modelo 1998–2001Exibido no inglês original · tradução pendenteVer detalhes →
CL II (2001) · 2000–2003
RecallCríticoInteriorNA

Air bags:Frontal:Driver side:Inflator module

Honda (American Honda Motor Co.) is recalling certain 2001-2002 Acura 3.2CL, 2000-2003 Acura 3.5RL, 2000-2001 Acura 3.2TL, Honda CR-V and Honda Odyssey, 2001-2002 Acura MDX and 2000 Accord Coupe, Accord Sedan, Civic Coupe, and Civic Sedan vehicles. These vehicles may have received a replacement driver frontal air bag module as part of a vehicle repair. Due to a manufacturing issue, the replacement NADI inflator may absorb moisture, causing the inflator to rupture or the air bag cushion to underinflate.

NHTSA · Estados Unidos17 de jan. de 202020V027000Anos-modelo 2001–2002Exibido no inglês original · tradução pendenteVer detalhes →
CL I (1996) · 1996–1999CL II (2001) · 2000–2003
RecallCríticoInteriorNA

Airbags:Frontal:Lado do motorista:Módulo do inflador

A Honda (American Honda Motor Co.) está fazendo um recall de determinados veículos Acura 2.2CL de 1998, Acura 2.3CL de 1998-1999, Acura 3.0CL de 1998-1999, Acura 3.2CL e Acura MDX de 2001, Honda Accord Coupé, Accord Sedã, Civic Sedã, Odyssey e Acura 3.5RL de 1998-2000, Acura 3.2TL de 1999-2000, Civic Coupé de 1996-2000, CR-V de 1997-2000, EV Plus de 1997-1998 e Isuzu Oasis de 1998-1999. Esses veículos foram equipados com infladores de airbag do motorista sem azida (NADI) e não contêm propelente de nitrato de amônio estabilizado por fase (PSAN). Devido a um problema de fabricação, os infladores NADI podem absorver umidade, fazendo com que os infladores se rompam ou que o cushion do airbag não infle adequadamente.

NHTSA · Estados Unidos17 de jan. de 202020V026000Anos-modelo 1998–2001Traduzido automaticamente · original: inglêsVer detalhes →
CL II (2001) · 2000–2003
RecallCríticoInteriorNA

Airbags:Frontal:Lado do motorista:Módulo do inflador

Honda (American Honda Motor Co.) está fazendo o recall de determinados veículos Acura 3.2CL de 2003, Acura 3.2TL de 2002-2003, MDX de 2003-2006, Honda Accord de 2001-2007, Civic de 2001-2005, Civic Hybrid de 2003-2005, Civic GX NGV de 2001-2005, CR-V de 2002-2006, Element de 2003-2011, Odyssey de 2002-2004, Pilot de 2003-2008 e Ridgeline de 2006. Esses veículos estão equipados com infladores do airbag frontal do motorista montados como peça de correção de recall ou peça de reposição de serviço, que podem explodir devido à degradação do propelente após exposição prolongada a alta umidade absoluta, temperatura e ciclos de variação de temperatura.

NHTSA · Estados Unidos27 de jun. de 201919V499000Anos-modelo 2003Traduzido automaticamente · original: inglêsVer detalhes →
CL II (2001) · 2000–2003
RecallCríticoInteriorNA

Airbag

Issue: On certain vehicles, there could be a problem with the driver-front airbag inflator. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, pieces could be propelled toward the occupants. This could also cause damage to the airbag assembly and prevent it from inflating properly. Note: This recall only affects certain vehicles that had a Takata airbag inflator installed during a previous airbag recall or collision repair. Safety Risk: In a crash where the airbag deploys, there could be an increased risk of injury. Corrective Action: The company will notify owners by mail. Owners will be instructed to take their vehicle to a dealer to have the driver-front airbag inflator replaced.

Transport Canada7 de mar. de 20192019117Anos-modelo 2003Exibido no inglês original · tradução pendenteVer detalhes →
CL II (2001) · 2000–2003
RecallCríticoInteriorNA

Air bags:Frontal:Driver side:Inflator module

Honda (American Honda Motor Co.) is recalling specific 2003 Acura 3.2CL, 2013-2016 ILX, 2013-2014 ILX Hybrid, 2003-2006 MDX, 2007-2016 RDX, 2002-2003 3.2TL, 2004-2006, and 2009-2014 TL, 2010-2013 ZDX and 2001-2007 and 2009 Honda Accord, 2001-2005 Civic, 2003-2005 Civic Hybrid, 2001-2005 Civic GX NGV, 2002-2007 and 2010-2011 CR-V, 2003-2011 Element, 2007 Fit, 2002-2004 Odyssey, 2003-2008 Pilot, and 2006-2014 Ridgeline vehicles. The affected vehicles received a replacement driver air bag inflator as part of a previous Takata inflator recall remedy or a replacement driver air bag module containing the same inflator type as a service part. Due to a manufacturing error, in the event of a crash necessitating deployment of the driver frontal air bag, these inflators may explode.

NHTSA · Estados Unidos6 de mar. de 201919V182000Anos-modelo 2003Exibido no inglês original · tradução pendenteVer detalhes →
CL II (2001) · 2000–2003
RecallCríticoInteriorNA

Air bags:Frontal:Driver side:Inflator module

Honda (American Honda Motor Co.) is recalling certain model year 2001-2007 Accord, 2001-2005 Civic, 2001-2004 Honda Civic GX, 2003-2005 Honda Civic Hybrid, 2002-2006 CR-V, 2003-2011 Element, 2002-2004 Odyssey, 2003-2008 Pilot, 2006 Ridgeline, 2003 Acura 3.2CL, 2003-2006 Acura MDX, and 2002-2003 Acura 3.2TL vehicles. The affected vehicles are equipped with a dual-stage driver frontal air bag that may be susceptible to moisture intrusion and other factors, including manufacturing variability that, over time, could cause the inflator to rupture.

NHTSA · Estados Unidos28 de mai. de 201515V320000Anos-modelo 2003Exibido no inglês original · tradução pendenteVer detalhes →
CL II (2001) · 2000–2003
RecallCríticoInteriorNA

Airbag

On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: This recall supersedes special service campaign 2014567. Correction: Dealers will inspect/replace the driver's frontal airbag inflator. All vehicles having received a replacement inflator as part of any previous driver's inflator campaign will have a replacement inflator installed. Note: Honda Canada has created a special Airbag Inflator Hotline for immediate assistance. For more information, please contact: For Honda Owners: 1-877-445-7754 For Acura Owners: 1-877-445-9844

Transport Canada27 de mai. de 20152015225Anos-modelo 2003Exibido no inglês original · tradução pendenteVer detalhes →
CL II (2001) · 2000–2003
RecallCríticoInteriorNA

Airbag

Honda Canada is conducting a voluntary Safety Improvement Campaign concerning the driver's airbag inflator on certain vehicles equipped with Takata airbags. Honda will replace the driver's inflator on affected vehicles. This action is not being conducted under the requirements of the Motor Vehicle Safety Act. Note: This special service campaign was replaced by recall 2015225. Please see recall 2015225 for more information: <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2015225">Click here for more information</a>

Transport Canada15 de dez. de 20142014567Anos-modelo 2003Exibido no inglês original · tradução pendenteVer detalhes →
CL II (2001) · 2000–2003
RecallModeradoCâmbioNA

Powertrain

Certain operating conditions can result in heat build-up between the countershaft and secondary shaft second gears in the automatic transmission, eventually leading to gear tooth chipping or, in very rare cases, gear breakage can occur. Gear failure could result in transmission lock-up. Correction: On vehicles with 24 000 kms or less, the dealer will update the transmission with a simple revision to the oil cooler return line to increase lubrication to second gear. On vehicles with more than 24 000 kms, the dealer will inspect the transmission to identify gears that have already experienced discoloration due to overheating. If discolouration exists, the transmission will be replaced. If discolouration is not present, the dealer will perform the revision to the oil cooler return line.

Transport Canada23 de abr. de 20042004143Anos-modelo 2001–2003Exibido no inglês original · tradução pendenteVer detalhes →
CL II (2001) · 2000–2003
RecallModeradoCâmbioNA

Power train:Automatic transmission

On some mini vans, sport utility and passenger vehicles, certain operating conditions can result in heat build-up between the countershaft and secondary shaft second gears in the automatic transmission, eventually leading to gear tooth chipping or gear breakage.

NHTSA · Estados Unidos15 de abr. de 200404V176000Anos-modelo 2001–2003Exibido no inglês original · tradução pendenteVer detalhes →
CL I (1996) · 1996–1999
RecallModeradoFreiosNA

Other

On certain vehicles, the ignition switch may wear excessively and prevent proper interlock operation, making it possible to turn the ignition key to the off position and remove the key without shifting the transmission to Park. If the vehicle operator does not shift to Park before removing the key and fails to engage the parking brake, the vehicle could roll and a crash could occur. Correction: Dealer will perform the required inspection and necessary repairs.

Transport Canada10 de nov. de 20032003276Anos-modelo 1998–1999Exibido no inglês original · tradução pendenteVer detalhes →
CL I (1996) · 1996–1999
RecallModeradoElétricaNA

Electrical system:Ignition:Switch

On certain passenger vehicles and mini vans, the ignition switch may wear excessively and prevent proper interlock operation, making it possible to turn the ignition key to the "off" position and remove the key without shifting the transmission to "park."

NHTSA · Estados Unidos27 de out. de 200303V423000Anos-modelo 1998–1999Exibido no inglês original · tradução pendenteVer detalhes →
CL II (2001) · 2000–2003
RecallModeradoMotorNA

Engine and engine cooling:Engine

On certain minivans, sedans, coupes, and sport utility vehicles equipped with v6 engines, a timing belt tensioner pulley on the water pump is misaligned and could cause the timing belt to contact a bolt on the cylinder head. Eventually the belt could be damaged and fail.

NHTSA · Estados Unidos28 de ago. de 200202V226000Anos-modelo 2003Exibido no inglês original · tradução pendenteVer detalhes →
CL I (1996) · 1996–1999
RecallModeradoElétricaNA

Electrical

On certain vehicles electrical contacts in the ignition switch can degrade due to the high electrical current passing through the switch when the vehicle is started. Worn contacts could cause the engine to stall without warning, increasing the risk of a crash. Correction: Dealers will replace the ignition switch.

Transport Canada24 de mai. de 20022002096Anos-modelo 1997–1999Exibido no inglês original · tradução pendenteVer detalhes →
CL I (1996) · 1996–1999
RecallModeradoElétricaNA

Sistema elétrico: Ignição: Interruptor

Em certos sedans, coupés, hatchbacks e veículos utilitários desportivos, os contactos elétricos no interruptor de ignição podem degradar-se devido à elevada corrente elétrica que passa pelo interruptor quando o veículo é ligado.

NHTSA · Estados Unidos16 de mai. de 200202V120000Anos-modelo 1997–1999Traduzido automaticamente · original: inglêsVer detalhes →
CL I (1996) · 1996–1999
RecallModeradoSuspensãoNA

Suspension:Front:Control arm:Lower ball joint

Vehicle description: Passenger vehicles. Certain vehicles were manufactured with ball joints that can prematurely wear out and, in the worse case, the ball joint would separate causing the front suspension to collapse.

NHTSA · Estados Unidos10 de mai. de 199999V069000Anos-modelo 1997–1998Exibido no inglês original · tradução pendenteVer detalhes →
CL I (1996) · 1996–1999
RecallModeradoCâmbioNA

Power train:Automatic transmission:Park/neutral start interlock switch

Vehicle description: Passenger vehicles (honda accord sedans manufactured from september 18, 1997 to january 10, 1998; coupes manufactured december 11, december 15, 1997, and january 5, 1998; acura 2.3cl manufactured october 22, 1997 through january 7, 1998). During manufacturing, the casting die caused an irregularity in the right-side transmission cover. This irregularity can limit the movement of the parking pawl actuation level and prevent adequate engagement of the parking gear pawl. This does not comply with fmvs no. 114, "theft protection."

NHTSA · Estados Unidos10 de fev. de 199898V018000Anos-modelo 1998Exibido no inglês original · tradução pendenteVer detalhes →

Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).