Leitura livre · conta gratuita para contribuirSucessor do Anticars (2000)

BMW Série 3 E30

1982–1994 · 15 defeitos documentados · 4 mercados
Ano do modelo
MercadoTodosNAUK
RecallCríticoMotorNA

Fuel System

On certain 318I, 318IC, 318IS, 325IC, 325IS, 325IX, 525I, 535I, 735I and 735IL vehicles, the fuel feed hose could harden and "set" over time due to engine compartment temperatures. If this "setting" occurs, it is possible that seepage between the hose and fitting could result because the clamp cannot provide sufficient sealing force to compensate for the hardening of the hose. Fuel seepage, in the presence of an ignition source, could result in an engine compartment fire. Correction: fuel feed hoses and associated clamps will be replaced with ones of a new design.

Transport Canada30 de mai. de 19941994096Anos-modelo 1989Exibido no inglês original · tradução pendenteVer detalhes →
RecallCríticoMotorNA

Fuel system, gasoline:Delivery:Hoses, lines/piping, and fittings

Feed fuel hoses can harden and "set" over time, allowing a seepage of fuel at the connection between the hose and the engine fitting. The clamp used to hold the hose to the fitting is unable to compensate for the hardening of the feed fuel hose.

NHTSA · Estados Unidos11 de abr. de 199494V066000Anos-modelo 1989Exibido no inglês original · tradução pendenteVer detalhes →
RecallCríticoMotorNA

Visibility:Defroster/defogger/hvac system:Heater core

The malfunction or failure of a coolant system component results in significantly increased coolant temperature and a resulting increase in system pressure.

NHTSA · Estados Unidos1 de fev. de 199393V015000Anos-modelo 1984–1989Exibido no inglês original · tradução pendenteVer detalhes →
RecallCríticoElétricaNA

Heater And Defroster

On certain 318I vehicles, under certain conditions, the interior heater water control valve may bind while closing. This binding or slow-closing condition may cause the valve solenoid to draw excessive current, possibly resulting in overheating of the valve connector wiring and insulation. This condition could result in a passenger compartment fire.

Transport Canada24 de set. de 19841984105Anos-modelo 1984Exibido no inglês original · tradução pendenteVer detalhes →
RecallModeradoMotorNA

Heater And Defroster

On certain 318I, 325I and M3 vehicles, elevated pressure in the cooling system due to overheating could result in cracking of the heater core end piece. Should this happen, coolant could be expelled onto the lower right leg of the driver, possibly resulting in personal injury and/or fogging of the interior surfaces of the windows causing reduced driver vision. Correction: A thermistatic bypass valve will be installed to control coolant temperature in the heater core. Also, a new design radiator cap will be installed to control pressure and provide greater overflow.

Transport Canada19 de jul. de 19931993100Anos-modelo 1984–1989Exibido no inglês original · tradução pendenteVer detalhes →
RecallModeradoMotorNA

Engine

On certain 325IX vehicles, the oil dipstick tube attaching bracket may have been bent during the manufacturing process or during scheduled maintenance. This could possibly cause the dipstick to interfere with the throttle bellcrank lever's range of motion and prevent the lever from returning to the idle position after release of the accelerator pedal. Correction: Throttle bellcrank lever will be modified to provide sufficient clearance. Note: Vehicles with manual transmission only.

Transport Canada6 de abr. de 19881988049Anos-modelo 1988Exibido no inglês original · tradução pendenteVer detalhes →
RecallModeradoMotorNA

Vehicle speed control:Cables

The oil dipstick tube attaching bracket may have been bent during production or scheduled maintenance, reducing the clearance between the dipstick ring and the throttle bellcrank lever.

NHTSA · Estados Unidos15 de mar. de 198888V031000Anos-modelo 1988Exibido no inglês original · tradução pendenteVer detalhes →
RecallModeradoElétricaNA

Elétrica

Em determinados veículos 325E, 325ES, 528E, 535I, 635CSI e 735I, a luz de freio central elevada (high mounted) pode adicionar carga elétrica suficiente para fazer o interruptor da luz de freio superaquecer, levando, com o tempo, ao derretimento das peças plásticas internas do interruptor. Isso pode fazer com que o êmbolo do interruptor emperre na posição ON ou OFF. Nesse caso, a luz de freio ficaria permanentemente acesa ou apagada, independentemente da atuação do pedal do freio. Correção: Será instalado um interruptor da luz de freio com maior capacidade de corrente nos veículos afetados.

Transport Canada27 de nov. de 19861986134Anos-modelo 1986–1987Traduzido automaticamente · original: inglêsVer detalhes →
RecallModeradoFreiosNA

Iluminação exterior:Luzes de freio:Interruptor

O interruptor da luz de freio pode superaquecer, levando eventualmente à fusão das peças internas de plástico na área dos contatos elétricos.

NHTSA · Estados Unidos10 de nov. de 198686V151000Anos-modelo 1986–1987Traduzido automaticamente · original: inglêsVer detalhes →
RecallModeradoSuspensãoNA

Steering

On certain 318I, 325, 325E and 325ES vehicles, when a significant force is applied directly to the steering gearbox as the result of certain frontal crash conditions or front end contact with an object on the road, the steering column disengagement element, which is designed to reduce the amount of steering wheel rearward travel, could disengage completely. This would result in loss of post impact steering maneuverability without prior warning. Correction: Two plates will be bolted to the disengagement element to ensure that the element will not completely disengage in the event of an impact to the steering gear.

Transport Canada22 de out. de 19861986117Anos-modelo 1984–1986Exibido no inglês original · tradução pendenteVer detalhes →
RecallModeradoSuspensãoNA

Steering: Steering wheel/handle bar

The two parts of the steering column disengagement element could completely disconnect if the car contacts an object in the roadway or elsewhere of sufficient mass to apply a significant force directly to the steering gearbox. Consequence of defect: Steering control would be lost.

NHTSA · Estados Unidos20 de out. de 198686V138000Anos-modelo 1985–1986Exibido no inglês original · tradução pendenteVer detalhes →
RecallModeradoMotorNA

Fuel system, gasoline:Carburetor system

The idle control valve which controls idle speed by varying the amount of intake air that bypasses the throttle plate is subject to backfire into the intake manifold. Such backfire can damage the valve and cause the idle valve plate to remain open. Consequence of defect: This will result in abnormally high idle speed.

NHTSA · Estados Unidos6 de mai. de 198585V058000Anos-modelo 1984Exibido no inglês original · tradução pendenteVer detalhes →
RecallModeradoMotorNA

Engine

On certain 320I vehicles, crack in the exhaust system between the exhaust pipe and the catalytic converter could result in exhaust emissions which do not comply with CMVSS 1103.

Transport Canada22 de dez. de 19831983121Anos-modelo 1981–1982Exibido no inglês original · tradução pendenteVer detalhes →
RecallLeveMotorNA

Engine

On certain 318I vehicles, improper starting procedure could cause a backfire into the intake manifold and damage internal components of the idle control valve. This could result in abnormally high idle speed and if warnings of increased engine noise level and tachometer reading are not heeded, a vehicle crash could occur.

Transport Canada6 de jun. de 19851985072Anos-modelo 1984Exibido no inglês original · tradução pendenteVer detalhes →

Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).