Leitura livre · conta gratuita para contribuirSucessor do Anticars (2000)

BMW M8

2019–2025 · 0 defeitos documentados · 3 mercados

Os boletins técnicos (TSB) são instruções de reparação que os fabricantes enviam aos concessionários sobre problemas conhecidos. Não são recalls de segurança, mas muitas vezes confirmam um defeito.

Ano do modelo
BoletimModeradoMotorNA

Boletim

Under certain driving situations, coolant leaks onto the fuel injectors on cylinder bank (5-8).

NHTSA · boletim do fabricante11002676Anos-modelo 2019Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoMotorNA

Boletim

Under certain driving situations, coolant leaks onto the fuel injectors on cylinder bank (5-8).

NHTSA · boletim do fabricante11000498Anos-modelo 2019Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoMotorNA

Boletim

A vehicle arrives at your center to be diagnosed for a micro-leak in the fuel evaporative (EVAP) system(NVLD natural vacuum leak detection). For this condition, the following fault is stored in the DME: 190302 - fuel tank ventilation and scavenging air system, micro-leak: leakage more than 0.5mm For: Model vehicles other that the ones listed above, or for EVAP faults related to a large leak, after confirming that the fuel filler cap is fitted properly, then, proceed to follow the corresponding test plan

NHTSA · boletim do fabricante10249015Anos-modelo 2020Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoMotorNA

Boletim

A vehicle arrives at your center to be diagnosed for a micro-leak in the fuel evaporative (EVAP) system (NVLD natural vacuum leak detection). For this condition, the following fault is stored in the DME: 190302 - fuel tank ventilation and scavenging air system, micro-leak: leakage more than 0.5 mm.

NHTSA · boletim do fabricante10239602Anos-modelo 2019–2020Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

Retorno do Motor

NHTSA · boletim do fabricante11020074Anos-modelo 2020Traduzido automaticamente · original: inglêsVer detalhes →
BoletimLeveMotorNA

Boletim

One of the six engine oil pump mounting screws may not have been tightened with the correct torque.

NHTSA · boletim do fabricante11014421Anos-modelo 2024Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

Delivery stop: Oil pump screw connection

NHTSA · boletim do fabricante11012079Anos-modelo 2024Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

The NVLD limited emission related warranty for defects in materials or workmanship has been extended to 15 years/150,000 miles as determined from the original in-service date

NHTSA · boletim do fabricante11012066Anos-modelo 2020Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

The quick disconnect coupling on the cylinder head coolant vent line could break at the cylinder head. This would lead to loss of coolant from the engine.

NHTSA · boletim do fabricante10214256Anos-modelo 2018Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

Information updated about engine oil filter cap drain plug. When performing an engine oil service on vehicles equipped with a N63M, N63B or S63M engines; the ETK states to use "Set oil filter element" P/N 11 42 5 A33 C42 or P/N 11 42 5 A33 C43. The part numbers are not available at the moment.

NHTSA · boletim do fabricante10212785Anos-modelo 2019–2020Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

When performing an engine oil service on vehicles equipped with a S63M engine the ETK states to use "Setoil filter element" P/N 11 42 5 A33 C43. P/N 11 42 5 A33 C43 is a new part number that was recently created without current parts availability. Until further notice ONLY use "Set oil filter element" P/N 11 42 7 848 321.

NHTSA · boletim do fabricante10203332Anos-modelo 2020Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

On rare occasions during an engine oil service, the BMW Original (Genuine) engine oil filter insert is either difficult to remove or breaks apart in the oil filter housing.

NHTSA · boletim do fabricante10200228Anos-modelo 2019–2020Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

B58 ENGINE: ENGINE OIL FILTER REMOVAL PROCEDURE AND TOOLS . A. For the B58 engines, a BMW Oil Catch special tool for use in conjunction with removing the engine oilfilter insert is now available.

NHTSA · boletim do fabricante10199292Anos-modelo 2019–2020Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

B58 ENGINE: ENGINE OIL FILTER REMOVAL PROCEDURE AND TOOLS . A. For the B58 engines, a BMW Oil Catch special tool for use in conjunction with removing the engine oilfilter insert is now available.

NHTSA · boletim do fabricante10198899Anos-modelo 2019–2020Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

REPLACE ALL THE IGNITION COILS: The ignition coils may not have been produced to specifications which could lead to irregular running of the engine. A manufacturing defect affecting the ignition coil insulation.

NHTSA · boletim do fabricante10186214Anos-modelo 2020Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

B58C AND B58M ENGINES ENGINE OIL FILTER INSERT IS DIFFICULT TO REMOVE - REMOVAL: On rare occasions during an engine oil service the BMW Original (Genuine) engine oil filter insert is either difficult to remove or breaks apart in the oil filter housing. The engine oil filter is broken. The paper is torn and the lower plastic section is stuck in the engine oil filter housing.

NHTSA · boletim do fabricante10176360Anos-modelo 2019–2020Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

CONNECTEDDRIVE/BMW ASSIST SYSTEM DIAGNOSIS INFORMATION: This Service Information Bulletin (Revision 7) replaces SI B84 02 14 dated May 2019. ConnectedDrive/BMW Assist features are partially or completely inoperative. This Service Information Bulletin: Is being published because vehicles are down for an extended period of time when researching system failures with ConnectedDrive or BMW Assist. Will assist you both in identifying the issue and providing technical support. CAUSE Not enough information is available for BMW NA engineers to assist the technician in diagnosing the root cause.

NHTSA · boletim do fabricante10174320Anos-modelo 2019–2020Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

ENGINE OIL FILTER INSERT IS DIFFICULT TO REMOVE - REMOVAL: This Service Information Bulletin (Revision 1) replaces SI B11 01 20 dated February 2020. On rare occasions during an engine oil service the BMW Original (Genuine) engine oil filter insert is either difficult to remove or breaks apart in the oil filter housing. The engine oil filter is broken. The paper is torn and the lower plastic section is stuck in the engine oil filter housing (1).

NHTSA · boletim do fabricante10172487Anos-modelo 2019–2020Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

Delivery Stop on certain Model Year 2019 and 2020 BMW vehicles that were produced between July 20 2018 and November 2 2019. There is a possibility of contamination in the engine.

NHTSA · boletim do fabricante10169456Anos-modelo 2019Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

HIGH ENGINE SPEED IMMEDIATELY AFTER STARTING. In rare circumstances after the engine is started with the Start-Stop button the engine speed may immediately increase to a high constant RPM (approximately 3000 rpm).

NHTSA · boletim do fabricante10163031Anos-modelo 2019Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

SERVICE ACTION: CHECK COOLANT LEVEL. The filling procedure at the factory could have set the engine coolant level in the expansion tank to below the minimum level.

NHTSA · boletim do fabricante10160336Anos-modelo 2019Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

SERVICE ACTION: CHECK COOLANT LEVEL. The filling procedure at the factory could have set the engine coolant level in the expansion tank to below the minimum level.

NHTSA · boletim do fabricante10160253Anos-modelo 2019Exibido no inglês original · tradução pendenteVer detalhes →

Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).