Leitura livre · conta gratuita para contribuirSucessor do Anticars (2000)

BMW X7

2018– · 1 gerações · 10 defeitos documentados · 5 mercados
Gerações
Todas as geraçõesX72018–10128303

Os boletins técnicos (TSB) são instruções de reparação que os fabricantes enviam aos concessionários sobre problemas conhecidos. Não são recalls de segurança, mas muitas vezes confirmam um defeito.

Ano do modelo
MercadoTodosNA
BoletimModeradoMotorNA

Boletim

COOLANT LEAK FROM LOW TEMPERATURE COOLING CIRCUIT (N63R): Coolant leaking from the engine compartment. Traces of coolant leaking from the expansion tank of the low temperature cooling system. Coolant in the low temperature cooling circuit may also have an acrid smell and discoloration.

NHTSA · boletim do fabricante10166228Anos-modelo 2019Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoMotorNA

Boletim

COOLANT LEAK FROM LOW TEMPERATURE COOLING CIRCUIT (N63R) This Service Information bulletin replaces SI B17 06 17 dated February 2019.

NHTSA · boletim do fabricante10163034Anos-modelo 2019Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

The return springs on the exhaust camshaft followers (switchable rocker arm) may break.

NHTSA · boletim do fabricante11036377Anos-modelo 2023Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

Due to an assembly error the upper oil pan screws may not have been torqued correctly.

NHTSA · boletim do fabricante11027758Anos-modelo 2024Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

RSU availability. The engine cranks but will not start.

NHTSA · boletim do fabricante11025670Anos-modelo 2025Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

Oil Drain Plug Return

NHTSA · boletim do fabricante11024228Anos-modelo 2025Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

Due to an assembly error the upper oil pan screws may not have been torqued correctly.

NHTSA · boletim do fabricante11022863Anos-modelo 2025Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

Due to an assembly error, the oil pump screws may not have been torqued correctly.

NHTSA · boletim do fabricante11021816Anos-modelo 2024Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

Due to an assembly error the upper oil pan screws may not have been torqued correctly.

NHTSA · boletim do fabricante11021815Anos-modelo 2025Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

Due to an assembly error the upper oil pan screws may not have been torqued correctly.

NHTSA · boletim do fabricante11021813Anos-modelo 2025Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

Delivery stop: Oil pan top screw connection

NHTSA · boletim do fabricante11021167Anos-modelo 2025Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

A quality check revealed that the DME in these vehicles has a programming error. This results in a deviation of the fuel-air mixture in the internal combustion engine.

NHTSA · boletim do fabricante11020933Anos-modelo 2023Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

For certain model vehicles with the S68T engine, the Condition Based Service (CBS) data may show sparkplug replacement is due at a considerably earlier interval than specified in the Service and WarrantyInformational Booklet.

NHTSA · boletim do fabricante11014663Anos-modelo 2024Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

The return springs on the exhaust camshaft followers (switchable rocker arm) may break.

NHTSA · boletim do fabricante11014420Anos-modelo 2023Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

Customer perceptions: Vehicles with optional equipment 01CR -Remote Engine Start. The Remote Engine Start selection is missing in the Pre-conditioning sub-menu The Remote Engine Start can be selected using the vehicle key. However, the Remote Engine Start isnot carried out. The Check Control message (number 2055) appears: Remote engine start not available Vehicles with optional equipment 07ME - M Drivers Package: The increased maximum speed is not reached Vehicles with optional equipment 01MB - M Drive Professional: The M MODE TRACK is no longer available Only the M MODES ROAD and SPORT are available Applies to all the customer perceptions: Chance of the error occurring: Very rare, sporadic Both faults listed below are entered in the DME fault memory: 021280 - DME: Certificates (type 1) not ready And 021283 - DME, Secure Feature Activation: Secure Token check still running or unchecked Secure Token present Motor vehicles affected: Vehicles with engine S68T Vehicles with drive unit XB1T

NHTSA · boletim do fabricante11002677Anos-modelo 2024Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

The return springs on the exhaust camshaft followers (switchable rocker arm) may break.

NHTSA · boletim do fabricante11000497Anos-modelo 2023Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

The engine cranks but will not start.

NHTSA · boletim do fabricante10250362Anos-modelo 2024Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

The return springs on the exhaust camshaft followers may break.

NHTSA · boletim do fabricante10249014Anos-modelo 2023Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

High levels of silicone inside the ignition coil can lead to premature failure.

NHTSA · boletim do fabricante10249449Anos-modelo 2024Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

The return springs on the exhaust camshaft followers may break.

NHTSA · boletim do fabricante10246222Anos-modelo 2024Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

Delivery Stop on certain Model Year 2019 and 2020 BMW vehicles that were produced between July 20 2018 and November 2 2019. There is a possibility of contamination in the engine.

NHTSA · boletim do fabricante10169456Anos-modelo 2019Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

ENGINE VIBRATIONS OR NOISE This Service Information bulletin replaces SI B11 01 19 dated February 2019.

NHTSA · boletim do fabricante10163027Anos-modelo 2019Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

HIGH ENGINE SPEED IMMEDIATELY AFTER STARTING. In rare circumstances after the engine is started with the Start-Stop button the engine speed may immediately increase to a high constant RPM (approximately 3000 rpm).

NHTSA · boletim do fabricante10163031Anos-modelo 2019Exibido no inglês original · tradução pendenteVer detalhes →
BoletimLeveMotorNA

Boletim

CHECK ENGINE OIL LEVEL MESSAGE. "Check engine oil level" Check Control message (ID961) appears when starting the engine and again at the end of a trip.

NHTSA · boletim do fabricante10159117Anos-modelo 2019Exibido no inglês original · tradução pendenteVer detalhes →

Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).