Electrical system:Wiring:Fuses and circuit breakers
An in line fusible link may melt down and cause a fire.
🔔 Crie uma conta gratuita para receber alertas por e-mail sobre Buick LeSabre (todas as gerações)
An in line fusible link may melt down and cause a fire.
Under a high resistance load, the in-line fuseable link located in the area of the plastic windshield washer bottle bracket, may melt down and ignite the bracket. This could result in an engine compartment fire without prior warning. Correction: Windshield washer bottle bracket will be replaced on affected vehicles.
Vehicle description: Passenger vehicles. These vehicles do not conform to the requirements of fmvss no. 108, "lamps, reflective devices, and associated equipment." the head lamp adjustment device horizontal adjuster may not move the head lamp reflector when the shaft is rotated in a normal manner during aiming.
Estes veículos não estão em conformidade com as normas c.M.V.S.S 114 - sistema de travamento e 208 - instalações de cinto de segurança. O módulo de alarme de mau funcionamento, iluminação e travamento (MALL) pode conter um capacitor danificado. Se o capacitor estiver danificado, o alerta sonoro de "chave na ignição" e o alerta sonoro e a luz indicadora de cinto de segurança do motorista desafivelado podem não funcionar. Além disso, outras funções de alerta sonoro, os controles de iluminação interna e as funções de travamento elétrico das portas também são afetados. Correção: As concessionárias irão inspecionar e, se necessário, substituir o módulo MALL.
These vehicles were assembled with a malfunction alarm, lighting and locking (mall) module that can contain a damaged capacitor. If the capacitor is damaged, the "key in the ignition" warning chime and the driver seat belt unbuckled warning chime and indicator lamp may not work. This does not meet the requirements of fmvss no. 114, "theft protection" and fmvss no. 208, "occupant crash protection." in addition, other chime reminder functions, interior lighting controls, and power door locking features are also affected.
The driver side headlamp lens has an incorrect aim pad number on the lens. This does not comply with fmvss no. 108, "lamps, reflective devices, and associated equipment."
Certain vehicles do not comply with CMVSS 108 - Lighting Equipment. Some of these vehicle have been assembled with a driver side (left) headlamp lens which have an incorrect aim pad number on the lens. If these headlamps are re-aimed using a mechanical aiming device that utilizes the aiming pad numbers, the resultant aim would be out of the specified range. Correction: The driver side headlamp will be replaced.
The push pull headlight switch may have electrical contacts which allow an intermittent headlight circuit causing headlight to flicker or suddenly go out. Consequence of defect: Sudden loss of the headlights under severe weather or nighttime driving conditions could reduce driver visibility which might result in a vehicle crash without prior warning.
Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).