Leitura livre · conta gratuita para contribuirSucessor do Anticars (2000)

Chevrolet Volt

2010–2019 · 12 defeitos documentados · 3 mercados

Os boletins técnicos (TSB) são instruções de reparação que os fabricantes enviam aos concessionários sobre problemas conhecidos. Não são recalls de segurança, mas muitas vezes confirmam um defeito.

Ano do modelo
MercadoTodosNA
BoletimModeradoFreiosNA

Boletim

Service Update for Inventory and Customer Erroneous Electric Park Brake Message and Light, DTC C027D Expires with Base Warranty

NHTSA · boletim do fabricante10246661Anos-modelo 2012Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoFreiosNA

Boletim

FMVSS NONCOMPLIANCE RECALL - Front Brakes Lock During ABS, Stability Control, or Traction Control Activation

NHTSA · boletim do fabricante10246757Anos-modelo 2012Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoElétricaNA

Boletim

No Crank/No Start, Dead Battery Due to Parasitic Drain/Discharge.

NHTSA · boletim do fabricante10254206Anos-modelo 2011Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoInteriorNA

Boletim

This informational bulletin provides information regarding the Passenger Presence System (PPS) May Command Seat Belt Reminder Chime and Passenger Airbag Indicator On When Electronic Devices or Conductive Objects are Placed on Front Passenger Seat

NHTSA · boletim do fabricante10138552Anos-modelo 2013Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoFreiosNA

Boletim

12266 - Service Update. During vehicle startup, the Electric Park Brake telltale and the Service Electric Parking Brake telltale may illuminate in error. Dealers are to reprogram the Electronic Parking Bracke Control Module.

NHTSA · boletim do fabricante10138228Anos-modelo 2013Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoElétricaNA

Boletim

This Preliminary Information communication provides information to the technician about vehicles that may have misfires or rough running on cold start up. Technician may find a Diagnostic Trouble Code P0300. Technician will need to use a scan tool and observe Crankshaft Position Re-sync Counter parameter. The Re-sync Counter parameter should remain at 0 during all operating conditions, and while manipulating the related harnesses and connectors between the crankshaft position sensor and the Engine Control Module. Technician will need to inspect for water intrusion in related connectors, terminals, and components. Tech will need to bring the vehicle up to engine coolant temperature that was stored when Diagnostic Trouble Code P0300 was set. After the engine coolant temperature is up to temperature technician will need to perform compression and cylinder leakage and record the readings. Technician should also verify correct fuel system pressure, inspect the heated oxygen sensors for contamination from fuel, silicon, or the incorrect use of room temperature vulcanization silicone sealant, and inspect the spark plugs for incorrect heat range, coolant or oil fouling, carbon tracking, cracks or insulator fractures at the tip. Technician should also Test for coolant contamination into the cylinders.

NHTSA · boletim do fabricante10129886Anos-modelo 2012Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoSuspensãoNA

Boletim

This preliminary bulletin provides a procedure to reprogram the power steering module to correct the customers concern of the MIL on and a drop in power steering assist.

NHTSA · boletim do fabricante10126211Anos-modelo 2012Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoSuspensãoNA

Boletim

Este boletim informativo preliminar fornece um procedimento para reprogramar o módulo de controle da direção elétrica assistida para casos com relato de lâmpada indicadora acesa e os DTCs C0544 e U0415 registrados.

NHTSA · boletim do fabricante10126172Anos-modelo 2012Traduzido automaticamente · original: inglêsVer detalhes →
BoletimModeradoInteriorNA

Boletim

This informational bulletin provides information regarding the Passenger Presence System (PPS) May Command Seat Belt Reminder Chime and Passenger Airbag Indicator On When Electronic Devices or Conductive Objects are Placed on Front Passenger Seat

NHTSA · boletim do fabricante10113824Anos-modelo 2013Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoElétricaNA

Boletim

This Preliminary Information communication provides information to the technician about vehicles that may have misfires or rough running on cold start up. Technician may find a Diagnostic Trouble Code P0300. Technician will need to use a scan tool and observe Crankshaft Position Re-sync Counter parameter. The Re-sync Counter parameter should remain at 0 during all operating conditions, and while manipulating the related harnesses and connectors between the crankshaft position sensor and the Engine Control Module. Technician will need to inspect for water intrusion in related connectors, terminals, and components. Tech will need to bring the vehicle up to engine coolant temperature that was stored when Diagnostic Trouble Code P0300 was set. After the engine coolant temperature is up to temperature technician will need to perform compression and cylinder leakage and record the readings. Technician should also verify correct fuel system pressure, inspect the heated oxygen sensors for contamination from fuel, silicon, or the incorrect use of room temperature vulcanization silicone sealant, and inspect the spark plugs for incorrect heat range, coolant or oil fouling, carbon tracking, cracks or insulator fractures at the tip. Technician should also Test for coolant contamination into the cylinders.

NHTSA · boletim do fabricante10113340Anos-modelo 2012Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoElétricaNA

Boletim

This Preliminary Information communication provides information to the technician about vehicles that may have misfires or rough running on cold start up. Technician may find a Diagnostic Trouble Code P0300. Technician will need to use a scan tool and observe Crankshaft Position Re-sync Counter parameter. The Re-sync Counter parameter should remain at 0 during all operating conditions, and while manipulating the related harnesses and connectors between the crankshaft position sensor and the Engine Control Module. Technician will need to inspect for water intrusion in related connectors, terminals, and components. Tech will need to bring the vehicle up to engine coolant temperature that was stored when Diagnostic Trouble Code P0300 was set. After the engine coolant temperature is up to temperature technician will need to perform compression and cylinder leakage and record the readings. Technician should also verify correct fuel system pressure, inspect the heated oxygen sensors for contamination from fuel, silicon, or the incorrect use of room temperature vulcanization silicone sealant, and inspect the spark plugs for incorrect heat range, coolant or oil fouling, carbon tracking, cracks or insulator fractures at the tip. Technician should also Test for coolant contamination into the cylinders.

NHTSA · boletim do fabricante10112076Anos-modelo 2012Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoCâmbioNA

Boletim

12241 - customer satisfaction program. Vehicles can be affected by incorrect calendar date information sent through the telematics systems. If a significantly incorrect date is received (for example, 00/00/0000), and the vehicle is in the "delayed rate and departure time" charging mode, the hybrid powertrain control module (hpcm2) may reset and open the propulsion power relays. As a result, the electric motor has temporarily stopped working due to this software anomaly when their vehicle is in the delayed time and rate charge mode.

NHTSA · boletim do fabricante10089702Anos-modelo 2013Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoInteriorNA

Boletim

15642 - special coverage. On some 2011 model year chevrolet volt vehicles, the airbag indicator may illuminate. This may be caused by the sensing and diagnostic module (sdm) monitoring an increase in the resistance of the driver or passenger side-impact airbag deployment loop circuits. This increased resistance may be caused by loose terminal crimps in either the driver or passenger seat mounted side-impact airbag wiring harness connectors. Dealers are to inspect for the presence of specific diagnostic trouble codes (dtcs) and, if necessary, bypass the harness connectors and repair wiring in the driver and/or passenger front side-impact airbag deployment loop circuits. The repairs will be made at no charge to the customer.

NHTSA · boletim do fabricante10089494Anos-modelo 2011Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoInteriorNA

Boletim

15642 - special coverage. On some 2011 model year chevrolet volt vehicles, the airbag indicator may illuminate. This may be caused by the sensing and diagnostic module (sdm) monitoring an increase in the resistance of the driver or passenger side-impact airbag deployment loop circuits. This increased resistance may be caused by loose terminal crimps in either the driver or passenger seat mounted side-impact airbag wiring harness connectors. Dealers are to inspect for the presence of specific diagnostic trouble codes (dtcs) and, if necessary, bypass the harness connectors and repair wiring in the driver and/or passenger front side-impact airbag deployment loop circuits. The repairs will be made at no charge to the customer.

NHTSA · boletim do fabricante10089435Anos-modelo 2011Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoInteriorNA

Boletim

Special Coverage Adjustment - Side Impact Airbag Connectors

NHTSA · boletim do fabricante10247256Anos-modelo 2011Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoInteriorNA

Boletim

Passenger Presence System (PPS) May Command Seat Belt Reminder Chime Passenger Airbag Indicator On When Electronic Devices or Conductive Objects are Placed on Front Passenger Seat

NHTSA · boletim do fabricante10245786Anos-modelo 2013Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoSuspensãoNA

Boletim

Buick/chevrolet/gmc/opel: Power steering assistance malfunctions while either turning left or right. Models 2012 opel ampera, volt, 2013 lacrosse, regal, equinox, malibu, terrain, opel insignia. *pe updated 08/1/2013 *js updated 11/25/2013 *js updated 1/13/15. *pe

NHTSA · boletim do fabricante10050239Anos-modelo 2012Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoInteriorNA

Boletim

Gm: See document search button for owner letter. Driver airbag inspection. *kb updated 5/23/12. *pe

NHTSA · boletim do fabricante10043905Anos-modelo 2012Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoOutroNA

Boletim

Gm: See document search button for owner letter. Carpeted floor mats missing. Dealers are to install carpeted floor mats when mats become available. *js

NHTSA · boletim do fabricante10043856Anos-modelo 2012Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoSuspensãoNA

Boletim

General motors: Reservoir for power steering fluid is heat damaged and leaking. May caused problems with power steering pump. *pe

NHTSA · boletim do fabricante10043629Anos-modelo 2012Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoSuspensãoNA

Boletim

Buick/chevrolet: It is hard to remove driver's side air bag due to revised spring design, which causes higher retaining force between driver's side air bag and steering wheel. *pe

NHTSA · boletim do fabricante10043315Anos-modelo 2012Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoElétricaNA

Boletim

Chevrolet: On certain vehicles, after updated calibrations were installed, may exhibit a possible and an estimated electric range drop. *pe updated 12/7/11. *pe

NHTSA · boletim do fabricante10042364Anos-modelo 2011Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoSuspensãoNA

Boletim

Gm: The steering wheel adjustment is binding or sticking. This is caused by the steering wheel lever adjustment nut tightening. *rm

NHTSA · boletim do fabricante10038705Anos-modelo 2011Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoMotorNA

Boletim

Gm: There is an engine oil leak at the front engine cover. 2011 volt. *rm updated 6/27/11. *pe

NHTSA · boletim do fabricante10038466Anos-modelo 2011Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoInteriorNA

Boletim

Gm: There are seat belt problems: Difficulty latching and unlatching buckle. Buckle release button is sticking. Seat belt warning light illuminated. Likely caused by sticky beverages that are spilled into the buckle assembly. *rm updated 4/3/12. *pe

NHTSA · boletim do fabricante10038294Anos-modelo 2011Exibido no inglês original · tradução pendenteVer detalhes →
Mais antigos →

Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).