Leitura livre · conta gratuita para contribuirSucessor do Anticars (2000)

Chrysler Voyager III

1995–2000 · 5 defeitos documentados · 5 mercados

Este dossiê reúne os defeitos conhecidos do Chrysler Voyager III, escritos e documentados pela comunidade. A leitura é livre; uma conta gratuita permite contribuir. Um defeito recebe o selo quando colaboradores reconhecidos suficientes o validam.

Defeitos mais graves

Ver tudo (5) →
m
CríticoMotorEU

Moteurs 2.5 TD et 2.4 essence

Attention à la fiabilité sur les modèles 1996-1997. Nous vous conseillons de passer votre chemin.

✓ Do arquivo Anticars1996–19972.5 TD, 2.4Exibido no francês original · tradução pendenteVer detalhes →
m
ModeradoFreiosEU

ABS

Parfois la fonction ne se déclenche pas.

✓ Do arquivo Anticars—Exibido no francês original · tradução pendenteVer detalhes →
m
ModeradoSuspensãoEU

Trains roulants

Usure irrégulière des pneus, tenue de cap incertaine sur quelques modèles.

✓ Do arquivo Anticars—Exibido no francês original · tradução pendenteVer detalhes →

Últimos recalls oficiais

Ver tudo (5) →
RecallModeradoInteriorUK

Seat belt may become inoperative

The D pillar sound barrier patches may loosen and drop onto the rear seat belt which may lead to the seat belt assembly becoming inoperative.

DVSA · Reino Unido6 de jan. de 2003R/2002/101Anos-modelo 1997–1999Exibido no inglês original · tradução pendenteVer detalhes →
RecallCríticoMotorUK

Engine compartment fuel leak concern

After extended use the fuel rail crossover tube O rings may leak fuel. This may lead to an engine compartment fire.

DVSA · Reino Unido6 de jan. de 2003R/2002/060Anos-modelo 1999Exibido no inglês original · tradução pendenteVer detalhes →

Últimos boletins técnicos

Ver tudo (1) →
BoletimModeradoCâmbioNA

Boletim

Radiator If vehicle comes in for transmission fluid leaking from trans-oil cooler fittings on the radiator, please check the following before replacing the radiator/cooler:~ 1. Remove both of the transmission lines from the cooler?s top/bottom flared fittings on the radiator. ~ 2. Loosen the hex nut on the top flared fitting on the radiator tank.~ 3. Torque the top flared fitting to 235 +/- 15 Lb-In.~ 4. Torque hex nut to 100 +/- 10 Lb-In.~ 5. Repeat for bottom flared fitting.~ 6. Reinstall transmission line per normal installation procedures and ensure correct fluid level.~ ~ If vehicle is in need of a new radiator for another reason, check the new radiator for correct torque on the trans-oil cooler fitting per steps 2-5 above.~ ~ If radiator has a yellow mark by the trans-oil cooler fittings the torque does not have to be checked.

NHTSA · boletim do fabricante10121923Anos-modelo 2000Exibido no inglês original · tradução pendenteVer detalhes →

Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0).