Leitura livre · conta gratuita para contribuirSucessor do Anticars (2000)

Citroën C1

2005–2022 · 2 gerações · 15 defeitos documentados · 2 mercados
Gerações
Ano do modelo
C1 II (AB40) · 2014–2022
C1 I (PM/PN) · 2005–2014
RecallCríticoMotorUK

Possibility of fuel leak

It has been identified that during the fuel tank production process the joint between the tank and the fuel supply pipe assembly may not have been produced to the correct standard. Should this indeed be the case leakage from the supply pipe area of the fuel tank might occur.

DVSA · Reino Unido7 de nov. de 2007R/2007/165Anos-modelo 2007Exibido no inglês original · tradução pendenteVer detalhes →
C1 II (AB40) · 2014–2022
C1 II (AB40) · 2014–2022
C1 II (AB40) · 2014–2022
C1 II (AB40) · 2014–2022
C1 I (PM/PN) · 2005–2014C1 II (AB40) · 2014–2022
C1 II (AB40) · 2014–2022
RecallModeradoSuspensãoJP

かじ取ギヤボックス

ステアリングコラムシャフトとステアリングギアボックスを接続するボルトの取付けが不適切なため、当該取付部の結合力が不足しているものがある。そのため、かじ取り操作等により当該取付部が分離して、最悪の場合、かじ取り操作ができなくなるおそれがある。

MLIT · Japão11 de jan. de 20191227720Anos-modelo 2018Exibido no japonês original · tradução pendenteVer detalhes →
C1 I (PM/PN) · 2005–2014
C1 I (PM/PN) · 2005–2014
C1 II (AB40) · 2014–2022
C1 II (AB40) · 2014–2022
RecallModeradoSuspensãoUK

Steering column may fail unexpectedly

A component of the steering column may not be to specification and could fail. If this occurs there would be a loss of directional control.

DVSA · Reino Unido27 de jun. de 2016R/2016/136Anos-modelo 2014Exibido no inglês original · tradução pendenteVer detalhes →
C1 I (PM/PN) · 2005–2014
C1 II (AB40) · 2014–2022
RecallModeradoCarroceriaUK

Bumper may not perform as designed in a collision

Affected vehicles may have a small defect in the front bumper frame. This may affect its impact absorption in the even of a collision.

DVSA · Reino Unido30 de jan. de 2015R/2015/024Anos-modelo 2014Exibido no inglês original · tradução pendenteVer detalhes →
C1 I (PM/PN) · 2005–2014
RecallModeradoFreiosUK

Loss of control

The front shock absorber rod may have an internal fault which could cause it to brake. This could have an adverse affect on the front suspension and the driver's ability to control the vehicle.

DVSA · Reino Unido19 de dez. de 2014R/2014/173Anos-modelo 2013Exibido no inglês original · tradução pendenteVer detalhes →
C1 I (PM/PN) · 2005–2014
C1 I (PM/PN) · 2005–2014
RecallModeradoSuspensãoUK

Rear cross-member may fail and cause driver to lose control

On subject vehicles a weld on the rear cross member might be non-compliant and eventually cause the weld between the cross member and the vehicle body to break. This may lead to a partial detachment of the axle and cause the driver to lose control.

DVSA · Reino Unido25 de fev. de 2014R/2014/028Anos-modelo 2013Exibido no inglês original · tradução pendenteVer detalhes →
C1 I (PM/PN) · 2005–2014
RecallModeradoMotorUK

Engine may fail

It has been established that the con-rod (big end) shell bearings may not have been manufactured to specification. This could lead to premature deterioration of the shells and if not identified it could result in engine failure.

DVSA · Reino Unido14 de nov. de 2012R/2012/129Anos-modelo 2010Exibido no inglês original · tradução pendenteVer detalhes →
C1 I (PM/PN) · 2005–2014
RecallModeradoSuspensãoUK

Suspension may fail

The left hand side front chassis may have a nonconformity which may lead to a risk of poor securing of the suspension arm.

DVSA · Reino Unido20 de jun. de 2011R/2011/070Anos-modelo 2011Exibido no inglês original · tradução pendenteVer detalhes →
C1 I (PM/PN) · 2005–2014
RecallModeradoMotorUK

Engine may fail

Due to incorrect machining it is possible that the crankshaft is not to the correct specification which can lead to insufficient lubrication of the crankshaft and subsequent engine failure.

DVSA · Reino Unido5 de nov. de 2010R/2010/192Anos-modelo 2010Exibido no inglês original · tradução pendenteVer detalhes →
C1 II (AB40) · 2014–2022
RecallModeradoOutroUK

Accelerator pedal may fail to return to idle

It has been identified that within the mechanism of the accelerator pedal there is a friction lever which interacts with a sliding surface. Over time and under certain conditionsthe contact surfaces may generated excessive friction and latterly the movement of the accelerator pedal. This over time and under certain conditions will result in the accelerator pedal becoming intermittently more difficult to push; or slower to return. In rare instances the accelerator pedal can remain in the partially depressed position.

DVSA · Reino Unido19 de fev. de 2010R/2010/012Exibido no inglês original · tradução pendenteVer detalhes →
C1 I (PM/PN) · 2005–2014
RecallModeradoSuspensãoUK

Wheel studs may become loose

A possible substandard tapping of one or more of the wheel stud holes may result in a reduction of the wheel stud to hub torque setting.

DVSA · Reino Unido28 de jul. de 2009R/2009/075Anos-modelo 2009Exibido no inglês original · tradução pendenteVer detalhes →

Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).