Steering bolts may not be tightened correctly
Incorrect assembly of the steering rack which could cause the loss of the mechanical link between the steering pinion valve and the steering rack during parking manoeuvres at full lock.
🔔 Crie uma conta gratuita para receber alertas por e-mail sobre Citroën Jumpy (todas as gerações)
Incorrect assembly of the steering rack which could cause the loss of the mechanical link between the steering pinion valve and the steering rack during parking manoeuvres at full lock.
The bolts retaining the front shock absorber could come loose. This may adversely affect the steering control of the vehicle.
The tightening torque of one of the nuts of the connection between the brake servo unit and the brake pedal may be not correct to specification. This may allow air to enter the servo
O aquecedor integrado do filtro de combustível pode estar defeituoso e pode causar distorção da tampa. Isto pode causar entrada de ar e saída de combustível. Qualquer um pode causar um arranque deficiente e uma luz de aviso deve acender-se
Em caso de temperaturas exteriores negativas e após ativações repetidas do aquecedor de combustível, uma ligação elétrica na tampa do aquecedor de combustível pode sobreaquecer. Isto pode fazer com que a tampa derreta, permitindo a entrada de ar no sistema de combustível, o que poderia levar à paragem do motor e à perda de controlo do carro.
null Front brake discs with the incorrect thickness may have been fitted. If this has happened, breakage of the brake discs cannot be ruled out.
An internal fault with the wiper motor could cause it to stop working. In some rare cases the windscreen wipers may stop working while in operation.
On certain vehicles the front brake discs may not be the required thickness for the vehicle definition. This concern may result in reduced braking efficiency.
De massa van de ruitenwissermotor via de reguliere bedrading is onvoldoende. Hierdoor kan de ruitenwissermotor uitvallen.
null The connection between the steering column and the steering wheel can become loose and lead to the failure of the steering.
Some tyres may have suffered superficial damage when the vehicle was being transported. The front Left hand tyre may have localised damage on the tread or the inner side. The tyre may rip and deflate.
It is possible that the wiring harness for the power assisted steering motor may come in contact with other components in the engine bay. Should this occur then it is possible that the power steering assistance on this large vehicle may become affected.
Em circunstâncias muito raras, a válvula unidirecional da bomba de vácuo pode não funcionar corretamente, o que pode afetar o nível de assistência de frenagem.
Foi identificado que a posição do anel de controlo da iluminação exterior pode não ser detetada pelo sistema de gestão de iluminação e as luzes podem desligar-se sem aviso.
The threaded portion of the brake linkage rod in the brake control system may not be to conformity. This could result in a reduction of braking efficiency.
It has been identified that water may ingress the brake drums causing premature brake lining wear. Should this occur the brake effort produced by the rear wheels may be reduced.
Foi identificado que, devido ao posicionamento incorreto do anel de controlo da iluminação exterior pelo sistema de gestão de iluminação, as luzes podem desligar-se inesperadamente.
It has been identified that on affected vehicles a non conformity within the accelerator pedal assembly may cause interference and prevent the pedal from returning to its original position. This may result in the vehicle maintaining a degree of acceleration which can be overcome by firm braking.
It has been identified that poor protection of the power steering pump earth terminal; could result in loss of power assistance to the steering.
The seat belt locking action may not be as fast as it is designed to be.
An inadequate weld on the bottom engine mounting tie bar may fail and cause a serious engine vibration and separation of one of the driveshafts.
Water ingress into the underbonnet vacuum electrovalves may cause a reduction in power assistance at the brake pedal. Malfunction of the electrovalves could also adversely affect the engine exhaust emissions.
Premature wear of the handbrake ratchet pawl may lead to inadvertent release of the handbrake. Problem of material hardness discovered in Quality Control tests.
On affected vehicles the radio display fixing screws may be missing allowing a potential detachment of the display during a collision.
A etiqueta VIN (número de identificação do veículo) do fabricante exibe um peso incorreto. Isso pode causar um acidente se o peso máximo autorizado for rebocado.
Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).