Leitura livre · conta gratuita para contribuirSucessor do Anticars (2000)

Citroën ZX

1991–1998 · 1 gerações · 6 defeitos documentados · 4 mercados
Gerações
Todas as geraçõesZX1991–1998617
Ano do modelo
MercadoTodosJPUK
RecallCríticoElétricaJP

その他(その他)

音響機器のオーディオ本体の配線基盤において、当該基盤の製造工程が不適切なため、コ ンデンサが損傷しているものがあり、そのままの状態で使用を続けると、当該コンデンサ の端子間が短絡して、スピーカに過大な電流が流れ、最悪の場合、火災にいたるおそれが ある。

MLIT · Japão17 de dez. de 19971206630Anos-modelo 1991–1994Exibido no japonês original · tradução pendenteVer detalhes →
RecallCríticoMotorJP

燃料ホース/パイプ

燃料注入時にエアを抜くための燃料ベ-パ-ホ-スの耐熱性が不足しているため、結合 部のホースに亀裂が生じて燃料漏れを起こし、最悪の場合、火災に至るおそれがある。

MLIT · Japão20 de fev. de 19961205830Anos-modelo 1992–1995Exibido no japonês original · tradução pendenteVer detalhes →
RecallCríticoMotorJP

燃料ホース/パイプ

燃料注入時にエアを抜くための燃料ベ-パ-ホ-スの耐熱性が不足しているため、結合 部のホースに亀裂が生じて燃料漏れを起こし、最悪の場合、火災に至るおそれがある。

MLIT · Japão20 de fev. de 19961205820Anos-modelo 1991–1995Exibido no japonês original · tradução pendenteVer detalhes →
RecallCríticoMotorJP

燃料ホース/パイプ

原動機の各気筒に燃料を分配する燃料分配器の先端にある密封栓(シールプラグ)の取付 け方法が不適切なため、このままの状態で使用を続けると、原動機の熱の影響により、当 該密封栓の密着性が低下して燃料漏れを起こし、最悪の場合、火災に至るおそれがある。

MLIT · Japão23 de mar. de 19951205532Anos-modelo 1992–1994Exibido no japonês original · tradução pendenteVer detalhes →
RecallCríticoMotorJP

燃料ホース/パイプ

原動機の各気筒に燃料を分配する燃料分配器の先端にある密封栓(シールプラグ)の取付 け方法が不適切なため、このままの状態で使用を続けると、原動機の熱の影響により、当 該密封栓の密着性が低下して燃料漏れを起こし、最悪の場合、火災に至るおそれがある。

MLIT · Japão23 de mar. de 19951205522Anos-modelo 1991–1994Exibido no japonês original · tradução pendenteVer detalhes →
RecallCríticoFreiosJP

圧力制御伝達部

主制動装置の前輪ブレーキパイプの取付に不適切なものがあるため、ハンドル操作を行 ったとき、当該ブレーキパイプと前輪懸架装置のリンクロッド(ストラットとスタビライ ザーとの連結棒)が干渉し、このままの状態で使用を続けると、最悪の場合、ブレーキパ イプが損傷し、ブレーキ液が漏れて制動力が低下するおそれがある。

MLIT · Japão2 de jun. de 19941205270Anos-modelo 1992Exibido no japonês original · tradução pendenteVer detalhes →
RecallCríticoFreiosJP

圧力制御伝達部

主制動装置の前輪ブレーキパイプの取付に不適切なものがあるため、ハンドル操作を行 ったとき、当該ブレーキパイプと前輪懸架装置のリンクロッド(ストラットとスタビライ ザーとの連結棒)が干渉し、このままの状態で使用を続けると、最悪の場合、ブレーキパ イプが損傷し、ブレーキ液が漏れて制動力が低下するおそれがある。

MLIT · Japão2 de jun. de 19941205260Anos-modelo 1991–1992Exibido no japonês original · tradução pendenteVer detalhes →
RecallCríticoFreiosUK

Front brake pipe chafe condition

It is possible that the front brake pipe may be contacted by the anti-roll bar link rod. In extreme conditions this may result in fluid leakage and partial loss of braking.

DVSA · Reino Unido22 de abr. de 1994R/1994/022Exibido no inglês original · tradução pendenteVer detalhes →
RecallModeradoMotorJP

エンジン本体

自動変速機装着車において、原動機の補機駆動用ベルトのオートテンショナ(張力を維 持する部品)に組み込まれている渦巻きバネ部の構造が不適切なため、オートテンショナ が破損して、最悪の場合、原動機が停止するおそれがある。

MLIT · Japão10 de abr. de 19971206350Anos-modelo 1995–1996Exibido no japonês original · tradução pendenteVer detalhes →
RecallModeradoMotorJP

エンジン本体

自動変速機装着車において、原動機の補機駆動用ベルトのオートテンショナ(張力を維 持する部品)に組み込まれている渦巻きバネ部の構造が不適切なため、オートテンショナ が破損して、最悪の場合、原動機が停止するおそれがある。

MLIT · Japão10 de abr. de 19971206340Anos-modelo 1995–1996Exibido no japonês original · tradução pendenteVer detalhes →
RecallModeradoInteriorJP

エアーバッグ

右ハンドル車において、エアバッグコントロール装置のコンピュータプログラムが不適 切なため、ハンドルを強くたたく等過大な衝撃を加えると、エアバッグが開くおそれがあ る。

MLIT · Japão30 de jan. de 19972201080Anos-modelo 1994–1996Exibido no japonês original · tradução pendenteVer detalhes →
RecallModeradoInteriorJP

エアーバッグ

右ハンドル車において、エアバッグコントロール装置のコンピュータプログラムが不適 切なため、ハンドルを強くたたく等過大な衝撃を加えると、エアバッグが開くおそれがあ る。

MLIT · Japão30 de jan. de 19972201070Anos-modelo 1994–1996Exibido no japonês original · tradução pendenteVer detalhes →
RecallModeradoFreiosJP

圧力制御伝達部

主制動装置の油圧発生部(マスターシリンダ)の構成部品であるピストンカップ(ゴム製 )の耐熱性が不足しているため、このままの状態で使用を続けると、原動機の熱の影響に より、当該ピストンカップが損傷し、最悪の場合、油圧の保持が出来なくなり、制動力 が低下するおそれがある。

MLIT · Japão23 de mar. de 19951205531Anos-modelo 1992Exibido no japonês original · tradução pendenteVer detalhes →
RecallModeradoFreiosJP

圧力制御伝達部

主制動装置の油圧発生部(マスターシリンダ)の構成部品であるピストンカップ(ゴム製 )の耐熱性が不足しているため、このままの状態で使用を続けると、原動機の熱の影響に より、当該ピストンカップが損傷し、最悪の場合、油圧の保持が出来なくなり、制動力が 低下するおそれがある。

MLIT · Japão23 de mar. de 19951205521Anos-modelo 1991–1992Exibido no japonês original · tradução pendenteVer detalhes →
RecallModeradoFreiosUK

Chafing of brake pipes

There may be inadequate clearance between one or both brake pipes at the master cylinder and a coolant pipe bracket on the cylinder head. Intermittent contact can consequently occur due to engine movement under high load. Should any of the brake

DVSA · Reino Unido16 de dez. de 1994R/1994/076Anos-modelo 1992–1994Exibido no inglês original · tradução pendenteVer detalhes →
RecallModeradoCâmbioUK

Clutch lever may foul engine wiring

There is a possibility that the clutch lever may foul a moulded clip which secures the engine wiring harness. Should this occur the clip may open releasing the harness and making it liable to chafing and damage by the clutch lever.

DVSA · Reino Unido17 de fev. de 1992R/1992/002Exibido no inglês original · tradução pendenteVer detalhes →

Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).