Em determinados veículos de passageiros dos anos-modelo 1996-1998, montados nas fábricas de Kansas City e Cuautitlán, ou em veículos de passageiros do ano-modelo 1999, montados nas fábricas da Automotive Alliance International, a superfície áspera das pás de aço inoxidável do resistor do ventilador do aquecedor pode danificar a superfície de cobre do conector do chicote elétrico. Com o tempo, esse dano pode aumentar a resistência no conector e, em consequência do posterior afrouxamento do terminal, resultar em uma condição de circuito aberto.
NHTSA · Estados Unidos9 de jul. de 200101V230000Anos-modelo 1996–1998Traduzido automaticamente · original: inglêsVer detalhes →
Vehicle description: Bi-fuel vehicles. These vehicles may have a fuel tank filler pipe grommet that could have been damaged during the installation of the bi-fuel system. If the grommet is damaged, fuel could leak. Fuel leakage in the presence of an ignition source could result in a fire. Dealers will replace the fuel tank filler pipe grommet.
NHTSA · Estados Unidos30 de out. de 200000V350000Anos-modelo 1998–2000Exibido no inglês original · tradução pendenteVer detalhes →
On certain vehicles, the fuel filler pipe vent hose may have less than the intended level of ozone resistance, which could result in the hose becoming brittle and cracking. A cracked hose could result in fuel leakage when the vehicle is being fueled. Fuel leakage in sufficient quantity in the presence of an ignition source could potentially result in a fire. Correction: Dealers will install a fuel filler vent hose containing the appropriate blend of PVC and nitrile rubber.
Transport Canada20 de set. de 19991999166Anos-modelo 1996Exibido no inglês original · tradução pendenteVer detalhes →
Vehicle description: Passenger vehicles. The fuel filler pipe vent hose may have less than the intended level of ozone resistance, which could result in the hose becoming brittle and cracking.
NHTSA · Estados Unidos13 de set. de 199999V247000Anos-modelo 1996Exibido no inglês original · tradução pendenteVer detalhes →
Vehicle description: Bi-fuel vehicles modified to run on either gasoline or compressed natural gas (cng). The natural gas fuel tanks have a solenoid shut-off valve that stops fuel flow from the fuel tank in the event of certain moderate to severe collisions. If the vehicle is in a collision and the natural gas fuel line is damaged, the system could leak natural gas.
NHTSA · Estados Unidos17 de nov. de 199797V203000Anos-modelo 1996–1997Exibido no inglês original · tradução pendenteVer detalhes →
The fuel tank filler pipe opening reinforcement, fabricated from two separately moulded pieces spin welded together, may eventually leak fuel at the weld joint. Fuel leakage in the presence of an ignition source, could potentially result in a fire. Correction: Fuel tank assemblies will be replaced with ones containing one piece moulded reinforcements.
Transport Canada9 de jan. de 19961996002Anos-modelo 1995Exibido no inglês original · tradução pendenteVer detalhes →
The passenger side supplemental restraint system (air bag) may have a cracked inflator body. If the vehicle is involved in a deployment level crash, the passenger side air bag may not inflate properly which could result in reduced occupant protection. In addition, the igniter plug could separate from the inflator, which could result in the release of hot gases and could ignite flammable material or potentially cause personal injury. Correction: Vehicles will be inspected and a new passenger side air bag module will be installed if necessary.
Transport Canada21 de fev. de 19951995032Anos-modelo 1995Exibido no inglês original · tradução pendenteVer detalhes →
The fuel filler opening reinforcement (an integral part of the fuel tank assembly) may leak fuel. In the presence of an ignition source, a fire could result. Correction: Fuel tank will be replaced on affected vehicles.
Transport Canada17 de out. de 19941994158Anos-modelo 1995Exibido no inglês original · tradução pendenteVer detalhes →
Vehicle description: Passenger vehicles built at the kansas city assembly plant and originally sold in or currently registered in the states of connecticut, delaware, illinois, indiana, iowa, maine, maryland, massachusetts, michigan, minnesota, missouri, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, west virginia, and wisconsin, and the district of columbia. The front coil springs may fracture as a result of corrosion in high corrosion environments. Depending on the location of the fracture, a broken spring could move past the spring seat and contact a front tire.
NHTSA · Estados Unidos8 de ago. de 200101V255000Anos-modelo 1998Exibido no inglês original · tradução pendenteVer detalhes →
Descrição do veículo: veículos de passageiros de 1995 equipados com os motores de 2.0 l e 2.5 l, e veículos de 1996 equipados com motores de 2.5 l. O aperto dos rolamentos do motor do ventilador de arrefecimento do motor, até e incluindo a parada do motor, pode resultar em aumento do torque do motor, corrente do motor acima do normal e altas temperaturas do motor associadas.
NHTSA · Estados Unidos6 de nov. de 200000V367000Anos-modelo 1995–1996Traduzido automaticamente · original: inglêsVer detalhes →
Descrição do veículo: Veículos de passageiros, camiões ligeiros, veículos utilitários desportivos e mini-carrinhas equipadas com conjuntos de fivela de cinto de segurança TRW. A base da fivela destes conjuntos de cintos de segurança não foi devidamente tratada termicamente e, por isso, não cumpre o requisito de suporte da norma federal de segurança automóvel nº 209, "conjuntos de cinto de segurança".
NHTSA · Estados Unidos18 de ago. de 200000V228001Anos-modelo 2000Traduzido automaticamente · original: inglêsVer detalhes →
Veículos de passageiros não equipados com o sistema de freios antibloqueio (ABS). Uma válvula redutora de pressão (PCRV) nos freios traseiros pode sofrer corrosão e resultar em mau funcionamento quando o veículo é operado em regiões que utilizam compostos de sal nas vias para degelo ou controle de poeira.
NHTSA · Estados Unidos9 de mar. de 200000V075000Anos-modelo 1996–2000Traduzido automaticamente · original: inglêsVer detalhes →
Vehicle description: Passenger vehicles. The air bag sensor wiring pigtail insulation can become brittle and crack over time due to accumulation of water in the pigtail protective convolute in combination with high underhood temperatures related to the routing of the wiring pigtail near the radiator. This can result in environmental stress cracking of the insulation.
NHTSA · Estados Unidos8 de set. de 199999V243000Anos-modelo 1998Exibido no inglês original · tradução pendenteVer detalhes →
Vehicle description: Passenger vehicles. The accelerator cable may have been manufactured with a burr on or near the end of the cable sleeve interior. This burr could fray the core wire resulting in the accelerator not returning to idle when the accelerator is released.
NHTSA · Estados Unidos20 de jul. de 199999V194000Anos-modelo 1998Exibido no inglês original · tradução pendenteVer detalhes →
Vehicle description: Passenger vehicles. The terminals at the headlight switch and wiring harness connector can experience heat damage as a result of overheating.
NHTSA · Estados Unidos5 de mai. de 199999V103000Anos-modelo 1996–1998Exibido no inglês original · tradução pendenteVer detalhes →
Vehicle description: Passenger vehicles built with automatic transmissions which utilize a park/lock solenoid. It is possible to rotate the ignition key to the lock position and remove the key without the shift lever and transmission being in park. These vehicles do not comply with the requirements of fmvss no. 114, "theft protection."
NHTSA · Estados Unidos17 de mar. de 199999V060000Anos-modelo 1999Exibido no inglês original · tradução pendenteVer detalhes →
Certain vehicles do not comply with CMVSS 205 - glazing materials. The windshields on were produced without the "AS1" mark as required by American National Standards Institute (ANSI) Z26.1. These windshields fully meet all of the requirements of Standard 205. Correction: Since the absence of the AS1 mark is highly unlikely to produce any risk of injury, no corrective action will be taken.
Transport Canada21 de dez. de 19981998243Anos-modelo 1998–1999Exibido no inglês original · tradução pendenteVer detalhes →
Certain vehicles may not comply with CMVSS 1105 - evaporative emissions. The rear fuel lines may allow fuel to seep and evaporate at the metal line to nylon tube joint at the rear of the vehicle near the fuel filter. This may cause evaporative emissions in excess of the standard. Correction: Vehicle will be inspected for signs of fuel escaping a joint between a nylon tube and a metal fuel line. If wetness or fuel odor are detected a reinforcement kit will be installed.
Transport Canada23 de nov. de 19981998234Anos-modelo 1999Exibido no inglês original · tradução pendenteVer detalhes →
On certain vehicles, the floor shift automatic transmission control may be damaged if subjected to certain vehicle interior cleaning products. If exposed to these products, the transmission gear position indicator may deteriorate and not correctly indicate the actual gear position. If this occurs, the shifter will continue to operate normally, but there is the potential for incorrect gear selection. Correction: Automatic transmission floor shift control will be replaced.
Transport Canada21 de out. de 19981998208Anos-modelo 1995–1998Exibido no inglês original · tradução pendenteVer detalhes →
Vehicle description: Passenger vehicles. The floor shift automatic transmission control can be damaged if subjected to certain interior cleaning products. The gear position indicator can deteriorate and not correctly indicate the actual gear position.
NHTSA · Estados Unidos18 de set. de 199898V233000Anos-modelo 1995–1998Exibido no inglês original · tradução pendenteVer detalhes →
Note: Vehicles equipped with 2.5 litre engines. These vehicles may not comply with c.M.V.S.S. 1103 - exhaust emissions. Premature failure of the catalyst substrate material in the catalyst and exhaust manifold assemblies (light-off catalysts) can result in restricted exhaust gas flow, loss of power and exhaust emission levels in excess of those specified in the standard. Correction: Left and right hand light-off catalysts will be replaced. Underbody catalyst will be inspected and replaced if necessary.
Transport Canada20 de mai. de 19981998103Anos-modelo 1995–1996Exibido no inglês original · tradução pendenteVer detalhes →
Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).