Leitura livre · conta gratuita para contribuirSucessor do Anticars (2000)

Ford Probe

1988–1997 · 2 gerações · 24 defeitos documentados · 1 mercados
Gerações
Ano do modelo
MercadoTodosJPNA
Probe I (1989) · 1988–1992Probe II (1993) · 1992–1997
RecallCríticoElétricaJP

その他(その他)

音響機器のオーディオ本体の配線基盤において、当該基盤の製造工程が不適切なため、コ ンデンサが損傷しているものがあり、そのままの状態で使用を続けると、当該コンデンサ の端子間が短絡して、スピーカに過大な電流が流れ、最悪の場合、火災にいたるおそれが ある。

MLIT · Japão17 de dez. de 19971206640Anos-modelo 1991–1993Exibido no japonês original · tradução pendenteVer detalhes →
Probe II (1993) · 1992–1997
RecallCríticoInteriorNA

Seats And Restraints

The passenger side supplemental restraint system (air bag) may have a cracked inflator body. If the vehicle is involved in a deployment level crash, the passenger side air bag may not inflate properly which could result in reduced occupant protection. In addition, the igniter plug could separate from the inflator, which could result in the release of hot gases and could ignite flammable material or potentially cause personal injury. Correction: Vehicles will be inspected and a new passenger side air bag module will be installed if necessary.

Transport Canada21 de fev. de 19951995032Anos-modelo 1995Exibido no inglês original · tradução pendenteVer detalhes →
Probe I (1989) · 1988–1992
RecallCríticoInteriorNA

Seat belts:Front:Anchorage

Brackets mounting automatic shoulder belt retractor assembly may have an understrength spot weld.

NHTSA · Estados Unidos1 de jan. de 199191V016000Anos-modelo 1991Exibido no inglês original · tradução pendenteVer detalhes →
Probe II (1993) · 1992–1997
RecallModeradoMotorJP

その他(燃料装置)

燃料注入口のアウターパイプに嵌合しているインナーパイプの溶接位置に不適切なものが あるため、インナーパイプが燃料フィラーキャプのシールと干渉するものがあり、そのま まの状態で使用を続けると、フィラーキャップとアウターパイプの気密性が損なわれ、最 悪の場合、当該部位から燃料蒸発ガスが大気に排出するおそれがある。

MLIT · Japão13 de out. de 19991207600Anos-modelo 1995–1996Exibido no japonês original · tradução pendenteVer detalhes →
Probe II (1993) · 1992–1997
RecallModeradoMotorNA

Emissions

Certain vehicles may not comply with the requirements of CMVSS 1105 - Evaporative Emissions. Fuel vapour may leak from between the fuel cap and the fuel filler pipe. Correction: Filler cap will be replaced with one that incorporates an o-ring that will positively seal the suspect fuel filler pipes.

Transport Canada26 de jul. de 19991999134Anos-modelo 1995–1997Exibido no inglês original · tradução pendenteVer detalhes →
Probe II (1993) · 1992–1997
RecallModeradoMotorNA

Engine

On certain vehicles, an external spring in the timing belt auto tensioner may break. The broken spring may get caught in the timing belt, resulting in possible engine stalling. Correction: Vehicles will be inspected and affected tensioners will be replaced.

Transport Canada16 de nov. de 19981998225Anos-modelo 1997Exibido no inglês original · tradução pendenteVer detalhes →
Probe II (1993) · 1992–1997
RecallModeradoMotorNA

Engine and engine cooling:Engine

Vehicle description: Passenger vehicles. An external spring in the timing belt tensioner can break and get caught in the timing belt.

NHTSA · Estados Unidos3 de nov. de 199898V206002Anos-modelo 1997Exibido no inglês original · tradução pendenteVer detalhes →
Probe I (1989) · 1988–1992
RecallModeradoInteriorNA

Seats And Restraints

The rail of the motorized seat belt track assembly may wear sufficiently under certain conditions to cause the cable which pushes and pulls the moveable buckle assembly to jam in the track, causing the seat belt track assembly to be inoperative. Correction: Driver side motorized shoulder belt tracks will be replaced with increased durability tracks. Passenger side belt tracks will be inspected and/or replaced as necessary.

Transport Canada30 de set. de 19961996153Anos-modelo 1990–1992Exibido no inglês original · tradução pendenteVer detalhes →
Probe I (1989) · 1988–1992
RecallModeradoInteriorNA

Seat belts:Front:Webbing

Note: Driver's side (left) passive seat belt assembly. The rail of the automatic shoulder belt can wear sufficiently such that the cable which retracts the buckle assembly will become jammed in the rail rendering the shoulder belt inoperative.

NHTSA · Estados Unidos6 de set. de 199696V172001Anos-modelo 1990–1992Exibido no inglês original · tradução pendenteVer detalhes →
Probe I (1989) · 1988–1992
RecallModeradoInteriorNA

Seat belts:Front:Webbing

Note: Passenger side (right) seat belt assembly. The rail of the automatic shoulder belt can wear sufficiently such that the cable which retracts the buckle assembly will become jammed in the rail rendering the shoulder belt inoperative.

NHTSA · Estados Unidos6 de set. de 199696V172002Anos-modelo 1990–1992Exibido no inglês original · tradução pendenteVer detalhes →
Probe I (1989) · 1988–1992Probe II (1993) · 1992–1997
RecallModeradoElétricaNA

Electrical

The fuel pump wiring assembly may corrode due to road salt, possibly resulting in an electrical bridge developing between the fuel pump electrical circuit and the fuel gauge sender terminals. This could cause the fuel sender ground circuit to overheat the wiring and melt its insulation causing smoke and possible damage to other wiring. Correction: A fused jumper harness will be installed in the fuel pump/sender electrical circuit.

Transport Canada13 de jun. de 19951995099Anos-modelo 1989–1995Exibido no inglês original · tradução pendenteVer detalhes →
Probe I (1989) · 1988–1992
RecallModeradoMotorNA

Emissões

Os testes de conformidade indicam que estes veículos podem estar emitindo níveis de monóxido de carbono (CO) superiores aos requisitos da C.M.V.S.S. 1103 - Emissões de Escapamento. Correção: o conversor catalítico será substituído nos veículos afetados.

Transport Canada27 de fev. de 19951995038Anos-modelo 1990Traduzido automaticamente · original: inglêsVer detalhes →
Probe I (1989) · 1988–1992
RecallModeradoMotorNA

Emissões

Nota: Substituído pelo 95038. Estes veículos podem não estar em conformidade com a norma C.M.V.S.S. 1103 - emissões de escapamento. Os catalisadores podem estar liberando emissões acima do padrão. Correção: os catalisadores do sistema de escapamento serão substituídos nos veículos afetados.

Transport Canada16 de fev. de 19951995027Anos-modelo 1990Traduzido automaticamente · original: inglêsVer detalhes →
Probe II (1993) · 1992–1997
RecallModeradoInteriorNA

Seats And Restraints

These vehicles do not comply with c.M.V.S.S. 210.1 tether anchorages for child restraints. The english tether bolt and metric anchor nut combination is not compatible with the standard. Also, information concerning the installation of the bolt contained in the owner guide is incorrect. Correction: New child restraint anchor bolt kits will be mailed to owners along with two revised stick-on owner guide pages. Also, dealers will replace incorrect panel weld nut if required.

Transport Canada22 de mar. de 19941994060Anos-modelo 1993Exibido no inglês original · tradução pendenteVer detalhes →
Probe II (1993) · 1992–1997
RecallModeradoInteriorNA

Air bags:Frontal

If the passenger-side air bag deploys in an accident and there is no passenger in that seating position, the air bag can detach from, and deform, the mounting bracket.

NHTSA · Estados Unidos15 de out. de 199393V169000Anos-modelo 1994Exibido no inglês original · tradução pendenteVer detalhes →
Probe II (1993) · 1992–1997
RecallModeradoCarroceriaNA

Structure

The lower pivot pin that joins the liftgate gas strut to the body may separate from the lower strut mounting bracket due to an undersized rivet head. If the pin separates, the liftgate could fall and possibly cause injury to persons under the falling liftgate. Correction: Vehicles will be inspected and, if one or both of the rivet heads are undersized, that liftgate will be replaced.

Transport Canada1 de jun. de 19931993079Anos-modelo 1993Exibido no inglês original · tradução pendenteVer detalhes →
Probe II (1993) · 1992–1997
RecallModeradoCarroceriaNA

Structure:Body:Hatchback/liftgate:Support device/strut

Vehicle description: Passenger vehicles. The lower pivot pin that joins the liftgate gas strut to the body can separate from the lower strut mounting bracket due to an undersized rivet head.

NHTSA · Estados Unidos13 de abr. de 199393V058000Anos-modelo 1993Exibido no inglês original · tradução pendenteVer detalhes →
Probe I (1989) · 1988–1992
RecallModeradoMotorNA

Emissions

Note: Vehicles with 3.0 litre engine. These vehicles may not comply with c.M.V.S.S. 1103 - exhaust emissions. Throttle position sensor may wear prematurely causing interruption of the sensor signal. Correction: Throttle position sensor will be inspected and replaced if necessary.

Transport Canada21 de ago. de 19921992100Anos-modelo 1990–1991Exibido no inglês original · tradução pendenteVer detalhes →
Probe I (1989) · 1988–1992
RecallModeradoMotorNA

Emissions

Vehicles with 3.0l engines and automatic transmissions only. These vehicles do not comply with c.M.V.S.S 1103 - exhaust emissions. Carbon monoxide levels exceed standard. Correction: Dealers will replace the electronic engine control (eec) processor and attach two decals.

Transport Canada29 de out. de 19911991145Anos-modelo 1990Exibido no inglês original · tradução pendenteVer detalhes →
Probe I (1989) · 1988–1992
RecallModeradoInteriorNA

Seats And Restraints

The brackets to which the automatic shoulder belt retractor assembly is mounted under the centre console may have understrength spot welds that might reduce the effectiveness of the shoulder belt in the event of a vehicle collision. Correction: Dealers will install two bolts to secure the brackets on affected vehicles.

Transport Canada12 de mar. de 19911991040Anos-modelo 1991Exibido no inglês original · tradução pendenteVer detalhes →
Probe I (1989) · 1988–1992
RecallModeradoElétricaNA

Lights And Instruments

These vehicles do not comply with c.M.V.S.S. 108 - lighting. Daytime running lights shut off whenever signal lights are activated. Correction: A revised design drl module will be installed on affected vehicles.

Transport Canada11 de fev. de 19911991020Anos-modelo 1990Exibido no inglês original · tradução pendenteVer detalhes →
Probe I (1989) · 1988–1992
RecallModeradoMotorNA

Engine

Vehicles with 3 litre engines may have throttle levers that were bent during vehicle assembly. If this condition exists, there is a potential that the throttle may stick and not return fully to the idle position. This could cause possible loss of vehicle control. Correction: Vehicles will be inspected and if necessary, the intake manifold assembly will be replaced.

Transport Canada28 de set. de 19891989133Anos-modelo 1990Exibido no inglês original · tradução pendenteVer detalhes →
Probe I (1989) · 1988–1992
RecallModeradoMotorNA

Vehicle speed control:Linkages

Throttle levers may have been bent during assembly.

NHTSA · Estados Unidos25 de set. de 198989V159000Anos-modelo 1990Exibido no inglês original · tradução pendenteVer detalhes →
Probe I (1989) · 1988–1992Probe II (1993) · 1992–1997
RecallLeveMotorJP

排気管

車体の中央下部にある副消音器後部の排気管接合部に溶接不良のものがあるため、そのま まの状態で使用を続けると、当該溶接部位に亀裂が発生し、そこから排気ガスが漏れると ともに、騒音が増大するおそれがある。

MLIT · Japão27 de mar. de 19971206330Anos-modelo 1992–1993Exibido no japonês original · tradução pendenteVer detalhes →
Probe II (1993) · 1992–1997
RecallLeveInteriorNA

Air bags

The supplementary air bag inflatable restraint caution label located on the driver side sun visor does not contain the statement, "do not install rearward facing child seats in any front passenger seat position." this does not comply with the requirements of fmvss no. 208, "occupant crash protection."

NHTSA · Estados Unidos3 de jun. de 199696V090000Anos-modelo 1996Exibido no inglês original · tradução pendenteVer detalhes →

Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).