On certain vehicles, excessive enlargement of a pilot hole in the rear brake backing plate could allow the wheel cylinder to rotate, possibly leading to loss of brake fluid in the rear brakes and loss of rear braking capability. This would result in increased stopping distances and possible crash. Note: vehicles in Ontario and Quebec only.
Transport Canada28 de mai. de 19861986056Anos-modelo 1980–1984Traduzido automaticamente · original: inglêsVer detalhes →
The axle retaining "c" clip in the differential may dislodge and allow the axle, wheel and brake drum to separate from the vehicle when subjected to side forces. Axle separation could result in loss of vehicle control and possible crash.
Transport Canada11 de jan. de 19851985010Anos-modelo 1980Exibido no inglês original · tradução pendenteVer detalhes →
The rear brake system brake pipe from the master cylinder to the proportioner valve on these vehicles may be contacting the air cleaner resonator bracket. Over an extended period of operation, the brake pipe could wear through sufficiently to cause a loss of brake fluid and a partial loss of braking action. If a vehicle happens to be in motion at a time when minimum stopping distance is required, this condition could result in a vehicle crash without prior warning. Models equipped with 5.7 l. V-8 diesel engines.
Transport Canada7 de out. de 19831983083Anos-modelo 1983Exibido no inglês original · tradução pendenteVer detalhes →
"tx" heavy duty wheels may have been manufactured with laminated steel. The wheel disc may fracture and the wheel and tire could partially or completely separate from the vehicle.
NHTSA · Estados Unidos23 de mar. de 198181V036000Anos-modelo 1981Exibido no inglês original · tradução pendenteVer detalhes →
Uma pequena bucha de náilon no pino (bail) do servo do controle de cruzeiro pode sair da posição, causando aumentos intermitentes e inesperados na rotação do motor, ou dieselização (funcionamento do motor após a chave ser desligada).
NHTSA · Estados Unidos16 de jun. de 198989V102000Anos-modelo 1984Traduzido automaticamente · original: inglêsVer detalhes →
Em determinados veículos, o alargamento excessivo do furo-guia na placa de apoio traseira pode permitir que o cilindro de roda gire, o que pode levar à perda da ação de freio traseiro.
Transport Canada29 de abr. de 19851985049Anos-modelo 1980Traduzido automaticamente · original: inglêsVer detalhes →
Rear axle assembly may have axles that were improperly manufactured. This condition may result in separation of the axle shaft and wheel assembly from the vehicle.
NHTSA · Estados Unidos24 de nov. de 198484V149000Anos-modelo 1980Exibido no inglês original · tradução pendenteVer detalhes →
The master cylinder rear brake pipe, which carries brake fluid to the rear brakes, may develop a leak due to extended chafing on the air cleaner resonator bracket.
NHTSA · Estados Unidos13 de out. de 198383V106000Anos-modelo 1983Exibido no inglês original · tradução pendenteVer detalhes →
On vehicles equipped with heavy duty wheels, the wheel discs may crack and could result in separation of the tire and part of the wheel from the vehicle. This could cause loss of vehicle control.
Transport Canada26 de mar. de 19811981038Anos-modelo 1981Exibido no inglês original · tradução pendenteVer detalhes →
The bolts that attach the lower rear control arm to the frame may fracture. The rear control arm supports and positions the rear axle. Fracture of the bolts would allow the control arm to drop free.
NHTSA · Estados Unidos25 de fev. de 198181V025000Anos-modelo 1980–1981Exibido no inglês original · tradução pendenteVer detalhes →
Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).