Os boletins técnicos (TSB) são instruções de reparação que os fabricantes enviam aos concessionários sobre problemas conhecidos. Não são recalls de segurança, mas muitas vezes confirmam um defeito.
Service Bulletin - When initiating a remote engine start command using the HondaLink application, the vehicle does not start, and an error message Remote Command Failed is returned due to the Telematics Control Unit (TCU) settings were not properly registered at the factory.
NHTSA · boletim do fabricante11002700Anos-modelo 2025Exibido no inglês original · tradução pendenteVer detalhes →
On Friday, January 29, 2016, American Honda Motor Co., Inc. notified NHTSA of a stop sale and safety recall for certain 2016 Civic vehicles due to potentially missing or mis-set piston pin snap rings that may cause engine stall or failure. Then on February 9, 2016, American Honda added additional VINs to the affected list. Any new or used units in dealer stock must be inspected and, if necessary, repaired per service bulletin 16-017, Safety Recall: Piston Pin Snap Ring Inspection once the parts, tools, and complete repair information are available. Refer to your eResponsibility report or VIN inquiry to determine which units in your inventory are affected by this safety recall
NHTSA · boletim do fabricante10192970Anos-modelo 2016Exibido no inglês original · tradução pendenteVer detalhes →
Video Message - It concerns how to replace a leaky front rocker arm oil control valve. Due to a deteriorated lower gasket or an out-of-spec gasket groove, the front rocker arm oil control valve can leak in certain V6 models with variable cylinder management. To fix this issue service bulletin A20-023 was posted. Please let us know if you would like a copy of the video sent to you on a DVD or thumb drive.
NHTSA · boletim do fabricante10175299Anos-modelo 2020Exibido no inglês original · tradução pendenteVer detalhes →
Video Message - It concerns how to replace a leaky front rocker arm oil control valve. Due to a deteriorated lower gasket or an out-of-spec gasket groove, the front rocker arm oil control valve can leak in certain V6 models with variable cylinder management. To fix this issue service bulletin A20-023 was posted. Please let us know if you would like a copy of the video sent to you on a DVD or thumb drive.
NHTSA · boletim do fabricante10175298Anos-modelo 2020Exibido no inglês original · tradução pendenteVer detalhes →
Service bulletin - The MIL comes on with DTC P0300 (random misfire detected) and/or P0301-P0306 (cylinder misfire detected) or P219A/B (air-fuel ratio variation of cylinder (bank 1, rear bank/bank 2, front bank). The injectors were installed improperly at the factory and/or contamination was introduced to the fuel system that is affecting the fuel flow.
NHTSA · boletim do fabricante10133021Anos-modelo 2016Exibido no inglês original · tradução pendenteVer detalhes →
Tech line summary article - If there?s an EVAP system leak from the filler neck (DTC P0455 [EVAP system large leak detected] or P0456 [EVAP system very small leak detected] is set), don?t replace the fuel fill pipe! Instead, replace the mis-fuel inhibit device and the main flap unit. Honda parts stock carries replacement parts just for this purpose.
NHTSA · boletim do fabricante10130051Anos-modelo 2016Exibido no inglês original · tradução pendenteVer detalhes →
Tech line summary article - If there?s an EVAP system leak from the filler neck (DTC P0455 [EVAP system large leak detected] or P0456 [EVAP system very small leak detected] is set), don?t replace the fuel fill pipe! Instead, replace the mis-fuel inhibit device and the main flap unit. Honda parts stock carries replacement parts just for this purpose.
NHTSA · boletim do fabricante10127365Anos-modelo 2016Exibido no inglês original · tradução pendenteVer detalhes →
Tech line summary article - If there's an EVAP system leak from the filler neck (DTC P0455 [EVAP system large leak detected] or P0456 [EVAP system very small leak detected] is set), don't replace the fuel fill pipe! Instead, replace the mis-fuel inhibit device and the main flap unit. Honda parts stock carries replacement parts just for this purpose.
NHTSA · boletim do fabricante10108904Anos-modelo 2016Exibido no inglês original · tradução pendenteVer detalhes →
Techline summary article - if theres an evap system leak from the filler neck (dtc p0455 [evap system large leak detected] or p0456 [evap system very small leak detected] is set), dont replace the fuel fill pipe! Instead, replace the mis-fuel inhibit device and the main flap unit. Honda parts stock carries replacement parts just for this purpose.
NHTSA · boletim do fabricante10108055Anos-modelo 2016Exibido no inglês original · tradução pendenteVer detalhes →
Honda: On certain vehicles, engine does not start after cranking, or will stumbles before idling, or takes longer than usual to start. Its an intermittent issue. *pe
NHTSA · boletim do fabricante10045241Anos-modelo 2012Exibido no inglês original · tradução pendenteVer detalhes →
Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).